Extreme X605 Digital charger and LiPo balancer 50W

X-605 EXTREME CHARGER Balance Charger/Discharger For NiCd/NiMh/Lithium/PB Batteries

The X-Charger B6 is an entry level balancing charger and discharger which can handle up to 6 cells and 5A.
The B6 will handle LiPo/LiFe up to 6S and NiMH/NiCd up to 15S and shows individual cell voltage during charge with realtime updates throughout the charge cycle.
Bundled with the X-Charger is a bunch of input and output wires which should satisfy any charging requirement.
The integrated fan avoide overheating in fast charging mode. The B6 can use indoor as well as outdoor. With the included 12V power connector cable it can easy connect to a car batterie.
Maximum security with integrated safety timer. The processor monitors the voltage of individual cells and try to normalise the voltage to be equal.

Optimized operating software charger with integrated safety timer.

• LiPo/LiLo/LiFe: 1-6 cells 3,7-22,4V; 0,1-5A
• LiPo/LiLo/LiFe in balancer mode: 1-6 cells 3,7-22,4V, 0,1-5A
• NiCd/NiMh: 1-15 cells 1,2-18V, 0,1-5A
  
• PB 2-20V
• charge/discharge up to 5 cycles
• Fast charging program for Lithium batteries
• PC based analysis using USB communication graph of voltage, current, capacity
• Data storage and load programm for your convenience.
• 16 chr + 2 lines LCD-screen
  
• Input power cable 11-18V DC
  
• Individual connection cable for most RC-usage
• Balancer connector: XH