|
|
|
1 pair high current connector gold platet
| #1 |
 |
NEW! XT60
High current pair of connector up to 60A gold plated
+ Low resistance for high current capacity
+ Ergonomically designed and easy to grip
+ Protected to avoid shorting and reverse polarity
+ Superior technology suited to todays high power applications
+ Designed with convenience and reliability in mind
+ Easy to solder
|
|
|
|
ABB Stotz power screwdriver tool-set Li-ion-technic
| #2 |
 |
Ergonomie, Kraft und Ausdauer.
Power-Schraubendreher mit Li-Ionen Technik. Der extrem starke Minifix 1000 bietet ein max. Drehmoment von 4,4 Nm - und das bei nur 485 Gramm Gewicht. (inkl. Akku)!
Die in 21 Stufen einstellbare Abschaltkupplung von 0,3 Nm bis 3 Nm ist für Arbeiten an allen Schrauben bestens geeignet.
Legendär ist die Getriebeblockierung für das manuelle Anziehen von Schrauben bis zu 15 Nm. Durch die eingebaute und zuschaltbare LED-Leuchte ist auch bei schlechten Lichtverhältnissen ein genaues Arbeiten gewährleistet.
Der Minifix 1000 kann von der geraden Ausrichtung ganz einfach in die Pistolenform umgestellt werden.
Die Schnellaufnahme mit 1/4" (6,35mm) ermöglicht die direkte Aufnahme der im Zubehör erhältlichen 73mm Bits. Standard-Bitsätze und Magnetverlängerungen können ebenfalls direkt eingesetzt werden. Das Schnellladegerät SDF-LG 1000 kann nicht nur die Li-Ionen Akkus SDF-AK 1000 laden, sondern auch die Akkus des kleineren Modells minifix 210 (SDF-AK210 / Best. No. 271-210) Technische Daten: Gewicht: 485 Gramm (inkl. Akku)
Länge: 276 mm
Akku: 2 x 3,6 V/1,5 Ah Li-Ionen
Ladezeit: 30 Minuten
Max. Drehmoment: 4,4 Nm
Rutschkupplung: 21 Stufen, 0,3 Nm - 3,0 Nm
Drehzahl: low: 200 U/min, high: 600 U/min
Werkzeugaufnahme: 6-kt Schnellaufnahme 1/4" (6,35 mm)
Schnellspannfutter (Zubehör): bis 10 mm
Werkzeug-Set im Koffer bestehend aus: 1 x Minifix 1000 Akkuschraubendreher
2 x Li-Ionen Akku SDF-AK 1000
1 x Ladegerät SDF-LG 1000 2 Jahre Herstellergarantie |
|
|
|
|
|
|
|
|
|
|
|
|
|
Akku monitor 2-3 cells
| #8 |
 |
Digital LiPo battery monitor Indicate the total voltage and the individual V per cell. Spec.:
LiPo Power Batterie Monitor für 2-3 Zellen.
Input: 7,4 - 11,1 V
Dimension: 40 x 30 x 10mm
Weight: 10g
Display: 4 Digit (No of cells, voltage total or per cell )
|
|
|
|
|
|
Assortmentbox 60 Titanium-Carbide Bits
| #10 |
 |
Assortmentbox EXAFORM Titanium-Carbide 1/4" 6,35mm 60 bits
contains:
je 5x Phillips Kreuz PH1 / PH2 / PH3
je 5x Pozidriv Kreuz PZ1 / PZ2 / PZ3
je 5x Torx TX10 / TX15 / TX20 / TX25 / TX30 / TX40 |
|
|
|
Assortmentbox 120 Classic bits
| #11 |
|
|
Assortmentbox Classic 1/4" 6,35mm 120 bits
contains:
je 10x Phillips Kreuz PH1 / PH2 / PH3
je 10x Pozidriv Kreuz PZ1 / PZ2 / PZ3
je 10x Torx TX10 / TX15 / TX20 / TX25 / TX30 / TX40 |
|
|
|
Assortmentbox 120 HiCrom Bits
| #12 |
|
|
Assortmentbox EXAFORM Titanium-Carbide 1/4" 6,35mm 60 bits
contains:
je 10x Phillips Kreuz PH1 / PH2 / PH3
je 10x Pozidriv Kreuz PZ1 / PZ2 / PZ3
je 10x Torx TX10 / TX15 / TX20 / TX25 / TX30 / TX40 |
|
|
|
Assortmentbox 120 Titanium-Carbide Bits
| #13 |
|
|
Assortmentbox EXAFORM Titanium-Carbide
contains:
je 10x Phillips Kreuz PH1 / PH2 / PH3
je 10x Pozidriv Kreuz PZ1 / PZ2 / PZ3
je 10x Torx TX10 / TX15 / TX20 / TX25 / TX30 / TX40 |
|
|
|
|
|
Battery Balancer & Watt Meter LiPo up to 6S 100A
| #15 |
 |
NEW! Battery Balancer & Watt Meter 60V 100A Easy to use Power Watt Meter for LiPo, Li-Io, Li-Fe battery packs. Now you can measure your current load and do optimaiziation of your electrical drive system. It can measure load current consumtion, current and Watt. The balancer can measure voltage of every single cell. It will give alarm if any Lithium battery pack has irregular has irregular voltage or the single battery cell shows irregular voltage. The integrated self balancer will start to balance every single cell with the same capacity. Specification: - Input Power: max 60V
- Max current: 100A
- Battery type: LiPo, LiFe, LiIo
- Current consumption: 20mA (Battery checker)
- Dimension: 105 x 50 x 20 mm
- Balancer: XHR Included in delivery - Battery Balancer & Watt Meter
- Power T Anschlußadaptor
- Balancer connection panel 2-6S
- Operation Instruction Usage examples:
|
|
|
|
BEC 5V 3A
| #16 |
 |
BEC 5V 3A Input: 5-23V (2-6 LiPo )
Output: 5V or 6V (switch) 3A 5 Amp peak |
|
|
|
BEC 5V 5A
| #17 |
 |
BEC 5V 5A Input: 5-29,6V (2-8 LiPo )
Output: 5V 5A |
|
|
|
|
|
|
|
Bessey AM4 2" x 1.5" AM Aluminum Mini Clamp
| #20 |
 |
Bessey AM4 2" x 1.5" AM Aluminum Mini Clamp
Features-
• Very light weight 2 oz. (55 gr.)
• Designed for delicate work - ideal for hobbies, crafts and model assembly
Specifications-
• Throat Depth: 2"
• Clamping Capacity: 1-1/2"
• Weight: 0.12 Lbs.
|
|
|
|
|
|
|
|
|
|
Bit set PHZ TITAN with magnet holder
| #24 |
 |
PHZ-Bit - First bit for PH- and PZ-Srews
Titan-Nitrit plated C6,3 1/4"Skt, 25mm,
DIN3126 / ISO1173 
Box contains:
1 x Gr. 1 x 25mm
2 x Gr. 2 x 25 mm
1 x Gr. 3 x 25 mm 1 x magnet holder |
|
|
|
Bitbox and screwdriver HANDYPAC
| #25 |
 |
The universal screwdriver.
Bitbox and screwdriver HANDYPAC. Fit for use as vehicle tool kid. Small, light and powerful. It contains 18 high quality bits
Inhalt: je 1 x cross PH1 / PH2 / PH3
je 1 x cross PZ1 / PZ2 / PZ3
je 1 x TX10 / TX15 / TX20 / TX25 / TX30 / TX40
je 1 x Inbus 4,0 / 5,0 / 6,0
je 1 x flat blade 4,5 / 5,5 / 6,5 mmThe HANDYPAC is your useful toolset for traveling, home, hobby or do-it-yourselfer.
Profi quality tools with ideas - MADE IN GERMANY -. |
|
|
|
Bitbox and screwdriver NEW! HANDYPAC now with hex nuts
| #26 |
 |
Bitbox and screwdriver HANDYPAC. Fit for use as vehicle tool kid. Small, light and powerful. It contains Torx, Hexagonal, Flat, Cross slot bits, and hexagon head.
  The HANDYPAC is your useful toolset for traveling, home, spare time hobby or workshop use.
Profi quality -MADE IN GERMANY- |
|
|
|
|
|
BITPOCKET 5 bits PHZ 2 TIN
| #28 |
 |
5 Bits PHZ 2 in comfortable metalbox.
(PHZ = two in one; Phillips + Pozidriv)
You no need anything else!
1/4" Skt. 25mm C6,3
Titanium Nitride coated high end crosshead screw driver bits for professionals.
|
|
|
|
Bitposit Bitbox 6xPHZ2; 6xPHZ1
| #29 |
 |
Bitposit 12 PHZ TIN Bits 6 x PHZ 2
6 x PHZ 1
 Ein Bit für zwei Antriebe! Das patentierte Spezialbit aus der Werkzeugfabrik Robert Schröder, Wuppertal. |
|
|
|
Bitset MIDIBOX EXAFORM Titan-Carbid
| #30 |
 |
MIDIBOX EXAFORM
- professional usage, high surface hardness
- Titan carbide surface for exrem high surface hardness - 3000HV
- increase in roughness
- good bonding of steel and coating
- long lifetime
- reduced cam out forces
Contains: - 20 EXAFORM TIC Bits
- 1 BITLOC quick release chuck 1/4"
Price scale: > 50pcs. 27,74 €/pc. incl. MwSt, incl. Versandkosten
> 100 pcs. 26,20 €/pc. incl. MwSt, incl. Versandkosten
> 250 pcs. 24,66 €/pc. incl. MwSt, incl. Versandkosten
Orders up to 50 boxes can be supplied with individual company logo.
Please contact our Service Team and ask for your individual offer.
|
|
|
|
Bitset MIDIBOX HICROM hard chrome
| #31 |
 |
MIDIBOX HICROM Bitbox
- professional usage, high surface hardness (-70 HRc)
- increase in roughness
- good bonding of steel and coating
- long lifetime
- reduced cam out forces
Price scale:
> 50 pcs. 23,45 €/pc. incl. MwSt, incl. shipping
> 100 pcs. 22,15 €/pc incl. MwSt, incl. shipping
> 250 pcs. 20,85 €/pc incl. MwSt, incl. shipping Orders up to 50 boxes can be supplied with individual company logo. Please contact our Service Team and ask for your individual offer.
|
|
|
|
Bitset MIDIBOX TIN Titan-Nitrid
| #32 |
 |
MIDIBOX TIN Bitbox
DIN 3126 / ISO 1173
- high surface hardness (-90 HRc)
- increase in roughness
- good bonding of steel and coating
- long life
- reduced cam out forces
Preisstaffel:
> 50Stück 21,90EUR incl. MwSt, incl. Versandkosten
> 100 Stück 20,65 EUR incl. MwSt, incl. Versandkosten
> 250 Stück 19,90 EUR incl. MwSt, incl. Versandkosten
Ab 50 Stück auch mit individuellem Firmenlogo erhältlich. |
|
|
|
Bitset MIDIBOX TORX
| #33 |
 |
MIDIBOX TORX bit size with color indicator system
- high surface hardnesss
- 20 Classic Bits 58-60 HRc, 56-58 HRc
- color code system
- 1 BITLOCPRO quick release chuck
3 x TX 10 (grey)
3 x TX 15 (orange)
4 x TX 20 (green)
4 x TX25 (blue)
3 x TX 30 (red)
3 x TX 40 (black) Price score:
> 50Stück 9,99EUR inkl. MwSt, inkl. Versandkosten
> 100 Stück 9,29 EUR inkl. MwSt, inkl. Versandkosten
> 250 Stück 8,59 EUR inkl. MwSt, inkl. Versandkosten
Ab 50 Stück auch mit individuellem Firmenlogo erhältlich.
|
|
|
|
Blackbird SR-71
| #34 |
 |
Blackbird SR-71 Die Blackbird SR-71 ist im Original ein Aufklärungsflugzeug und fliegt sehr hoch mit über 3-facher Schallgeschwindigkeit. Bei unserem R/C Flugmodell handelt es sich um eine sehr schöne Nachbildung aus lackiertem Formschaum (EPS). Zur Fertigstellung sind nur noch wenige Handgriffe nötig; Antrieb, Einziehfahrwerk, Servos - alles ist schon werksseitig eingebaut. Der serienmäßige, kraftvolle Doppel-Impellerantrieb wurde speziell für das Modell abgestimmt und verspricht ansprechende Flugleistungen.
Das Modell verfügt über ein werksseitig lackiertes Finish und hohe Detaillierung. Der Akkuwechsel erfolgt bequem von oben durch das einfach abnehmbare Cockpit. Die Querruder werden mit zwei Servos angesteuert. Zum Betrieb des Modells wird eine Fernsteuerung sowie ein LiPo Akku benötigt (Sonderzubehör).
Lieferumfang:
* Fertigmodell aus EPS Formschaum
* Fertig lackiert wie abgebildet
* Einziehfahrwer (Bugfahrwerk lenkbar)
* 2 x Brushless-Motor
* 2 x 64mm Hochleistungs-Impeller
* 2 x Brushless-Regler 40A mit integrierter Empfängerstromversorgung (BEC)
* 5 x Servo
* Anlenkungen, Kleinteile, Anleitung
| Technische Daten * | | Länge mm | 1200 | | Spannweite mm | 740 | | Gewicht g | 1200 | | Sonderzubehör | LiPo Akku LEMONRC 2200-11.1V, # C1444 |
* Technische Änderungen und Irrtümer vorbehalten |
|
|
|
Brushless motor set 60-3D
| #35 |
 |
Outrunner motor set Power-60-3D consists of: Brushless Outrunner D60 600W 1250 U/V
incl. mounting material and spinner
Part No. 716-600 speed controler 40A BEC 3A
Part No. SC-040 E-Propeller 10x4.7
Part No. EP-10x47
|
|
|
|
Brushless Outrunner 10 - 60W / 1400 r/v
| #36 |
 |
Brushless Outrunner Motor Type: dys10-60 | Dimensions: | D 28 x L 19 mm
| | Weight: | 19 g
| | Max. efficiency current: | 5,5 A max >74%
| Recommended model weight:
| < 300g
| | Cells: | 2 - 3 Li-Poly (7,4 - 11,1V)
| rpm/V:
| 1400 | Max. Speed:
| 15150 rpm
| Shaft Diameter:
| 3 mm
| Prop:
| 7 x 4 / 8 x 4
|
|
|
|
|
Brushless Outrunner A2822-1100 rpm/v
| #37 |
 |
Brushless Outrunner Motor
Type: A-2822/17
| Dimensions: | D 28 x L 22 mm | | Weight: | 38g | | Max. efficiency current: | 30 A | | Cells: | 2 - 3 LiPo (7,4-11,1V) | | rpm/V: | 1100 rpm/V | | Shaft Diameter: | 3,175*33 mm | | Prop: | 8x6/7x4 | | Max. Power | 102W | |
|
|
|
Brushless Outrunner A2822-1450 rpm
| #38 |
|
|
Brushless Outrunner Motor
The DYS A2822-14 brushless motors are the ideal low cost alternative to the well known E-flite Park 370 1360kv, Model Motors AXI 2208/26 or Hacker A20-26M motors.
This is an extremely popular motor size for small foam flyers such as the TECHone Mini Katana.
Specifications:
Model designation: 370 / A2822-14 / 2208
Weight: 38g
Case diameter: 28mm
Case length: 22mm
Shaft diameter: 3.17mm
KV (rpm/v): 1450
Resistance (M Ω): 0.112
Li-Po cells: 2-3
Speed controller: 20Amps
Max power (Watts): 150
Propelller size: 9 x 4.7 SF (2S/7.4V) / 8 x 4.7SF (3S/11.1V)
- High-efficient outrunner (>75%)
- smooth running with double ball-bearings.
- Delivery with mounting accessories and spinner. |
|
|
|
Brushless Outrunner A2822-1800 rpm/v
| #39 |
|
|
Brushless Outrunner Motor
Type: dys20-150
| Dimensions: | D 28 x L 22 mm
| | Weight: | 38 g
| | Max. efficiency current: | 8,5 A max >75%
| Recommended model weight:
| < 500g
| | Cells: | 2 - 3 Li-Poly (7,4 - 11,1V)
| rpm/V:
| 1800 | Max. Speed:
| 20150 rpm
| Shaft Diameter:
| 3.17 mm
| Prop:
| 6x3 / 8x4
| Max. Power
| 180W |
- High-efficient outrunner.
- smooth running, double ball-bearings.
- Best fit for high-speed models or jets.
- Delivery with mounting accessories and spinner.
We recommend the brushless-speed controler 20A BEC
Part-No. SC-020
recommended prop: E-PROP 8x4
Part-No. EP-8x4
|
|
|
|
Brushless Outrunner A2830-1000 rpm/v
| #40 |
 |
Brushless Outrunner Motor
Type: dys30-160
| Dimensions: | D 28 x L 49 mm
| | Weight: | 52 g
| | Max. efficiency current: | 12 A max >75%
| Recommended model weight:
| < 500g
| | Cells: | 2 - 4 Li-Poly (7,4 - 14,8V)
| rpm/V:
| 1000 | Max. Speed:
| 18150 rpm
| Shaft Diameter:
| 3.17 mm
| Prop:
| 10x6 / 9x4,5
| Max. Power
| 160W |
- low-turning outrunner motor for direct drive
- smooth running, double ball-bearings.
- Best fit for slow-flyer or gliders.
- Delivery with mounting accessories and spinner.
|
|
|
|
Brushless Outrunner A2830-1300 rpm/v
| #41 |
|
|
Brushless Outrunner Motor
Type: dys30-200
| Dimensions: | D 28 x L 49 mm
| | Weight: | 52 g
| | Max. efficiency current: | 14 A max
| | Cells: | 2 - 4 Li-Poly (7,4 - 14,8V)
| rpm/V:
| 1300 | Max. Speed:
| 20150 rpm
| Shaft Diameter:
| 3.17 mm
| Prop:
| 10x5 / 9x6
| Max. Power
| 200W |
- low-turning outrunner motor for direct drive
- smooth running, double ball-bearings.
- Best fit for 3D, acrobatic or gliders.
- Delivery with mounting accessories and spinner.
|
|
|
|
Brushless Outrunner A2836-1000 rpm/v
| #42 |
 |
Brushless Outrunner Motor
Type: A-3536/8 | Dimensions: | D 35 x L 36 mm | | Weight: | 102g | | Max. efficiency current: | 50 A | | Cells: | 2 - 4 LiPo (7,4-14,8V) | | rpm/V: | 1000 rpm/V | | Shaft Diameter: | 5,0*53,5 mm | | Prop: | 11X5.5/10x6 | | Max. Power | 480W | |
|
|
|
Brushless Outrunner A2836-1120 rpm/v
| #43 |
 |
Brushless Outrunner Motor
Type: dys30-220
| Dimensions: | D 28 x L 49 mm
| | Weight: | 70 g
| | Max. efficiency current: | 16,5 A max >75%
| Recommended model weight:
| ca. 700g
| | Cells: | 2 - 4 Li-Poly (7,4 - 14,8V)
| rpm/V:
| 1120 | Max. Speed:
| 20150 rpm
| Shaft Diameter:
| 3.17 mm
| Prop:
| 8x4 / 7x4
| Max. Power
| 220W |
- low-turning outrunner motor for direct drive
- smooth running, double ball-bearings.
- Best fit for 3D, acrobatic or gliders.
- Delivery with mounting accessories and spinner.
|
|
|
|
Brushless Outrunner A2836-1500 rpm/v
| #44 |
|
|
Brushless Outrunner Motor
Type: A2836-6-1500 (dys40-250)
| Dimensions: | D 28 x L 35 mm
| | Weight: | 70 g
| | Max. efficiency current: | 19,5 A max >75%
| Recommended model weight:
| ca. 800g
| | Cells: | 2 - 4 Li-Poly (7,4 - 14,8V)
| rpm/V:
| 1500 | Max. Speed:
| 22500 rpm
| Shaft Diameter:
| 3.17 mm
| Prop:
| 8x4 / 9x4
| Max. Power
| 368W |
- high-turning outrunner motor for direct drive
- smooth running, double ball-bearings.
- Best fit for 3D, acrobatic or gliders.
- Delivery with mounting accessories and spinner.
|
|
|
|
Brushless Outrunner A3530-1100 rpm/v
| #45 |
|
|
Brushless Outrunner Motor
Type: A-3530/14 | Dimensions: | D 35 x L 30 mm | | Weight: | 74g | | Max. efficiency current: | 50 A | | Cells: | 2 - 4 LiPo (7,4-14,8V) | | rpm/V: | 1100 rpm/V | | Shaft Diameter: | 5,0*47,5 mm | | Prop: | 10X4.7 / 9x5 | | Max. Power | 315W | |
|
|
|
Brushless Outrunner A3530-1400 rpm/v
| #46 |
|
|
Brushless Outrunner Motor
Type: A-3530/14 | Dimensions: | D 35 x L 30 mm | | Weight: | 74g | | Max. efficiency current: | 50 A | | Cells: | 2 - 4 LiPo (7,4-14,8V) | | rpm/V: | 1400 rpm/V | | Shaft Diameter: | 5,0*47,5 mm | | Prop: | 8x4/9x4.5 | | Max. Power | 430W | |
|
|
|
Brushless Outrunner A3530-1700 rpm/v
| #47 |
 |
Brushless Outrunner Motor Type: dys50-300
| Dimensions: | D 35 x L 30 mm
| | Weight: | 74 g
| | Max. efficiency current: | 20 A max >75%
| Recommended model weight:
| ca. 1500g
| | Cells: | 2 - 4 Li-Poly (7,4 - 14,8V)
| rpm/V:
| 1100 | Max. Speed:
| 16500 rpm
| Shaft Diameter:
| 4 mm
| Prop:
| 8x5 / 10x4
| Max. Power
| 460W |
- low-turning outrunner motor for direct drive (500er class)
- smooth running, double ball-bearings.
- Best fit for 3D, acrobatic or gliders.
- Delivery with mounting accessories and spinner.
|
|
|
|
Brushless Outrunner A3536-1250 rpm/v
| #48 |
|
|
Brushless Outrunner Motor
Type: A-3536/6 | Dimensions: | D 35 x L 36 mm | | Weight: | 102g | | Max. efficiency current: | 50 A | | Cells: | 2 - 4 LiPo (7,4-14,8V) | | rpm/V: | 1250 rpm/V | | Shaft Diameter: | 5,0*53,5 mm | | Prop: | 10x4.7 / 9x4.5 | | Max. Power | 496W | |
|
|
|
Brushless Outrunner A3542-1250 rpm/v
| #49 |
|
|
Brushless Outrunner Motor Type: dys60-400
| Dimensions: | D 35 x L 42 mm
| | Weight: | 130 g
| | Max. efficiency current: | 45.8 A
| Recommended model weight:
| ca. 1500g
| | Cells: | 2 - 4 Li-Poly (7,4 - 14,8V)
| rpm/V:
| 1250 | Max. Speed:
| 20000 rpm
| Shaft Diameter:
| 5 mm
| Prop:
| 9x6 / 10x4,7
| Max. Power
| 600W |
- High performance outrunner motor for direct drive
- smooth running, double ball-bearings.
- Best fit for 3D, acrobatic or gliders.
- Delivery with mounting accessories and spinner.
|
|
|
|
Brushless Outrunner BC-2225/13
| #50 |
 |
Brushless Outrunner Motor
Type: BC-2225/13
| Dimensions: | D 22 x L 25 mm | | Weight: | 32g | | Max. efficiency current: | 15 A | | Cells: | 2 - 3 LiPo (7,4-11,1V) | | rpm/V: | 2000 rpm/V | | Shaft Diameter: | 3,175*41 mm | | Prop: | 6X4 / 6x5 | | Max. Power: | 122W | | attraction: | 450g | |
|
|
|
Brushless Outrunner BC-2225/15
| #51 |
|
|
Brushless Outrunner Motor
Type: BC-2225/15
| Dimensions: | D 22 x L 25 mm | | Weight: | 32g | | Max. efficiency current: | 15 A | | Cells: | 2 - 3 LiPo (7,4-11,1V) | | rpm/V: | 1600 rpm/V | | Shaft Diameter: | 3,175*41 mm | | Prop: | 6X4 / 6x5 | | Max. Power: | 109W | | attraction: | 440g | |
|
|
|
Brushless Outrunner BC-2225/19
| #52 |
|
|
Brushless Outrunner Motor
Type: BC-2225/19
| Dimensions: | D 22 x L 25 mm | | Weight: | 32g | | Max. efficiency current: | 15 A | | Cells: | 2 - 3 LiPo (7,4-11,1V) | | rpm/V: | 1350 rpm/V | | Shaft Diameter: | 3,175*41 mm | | Prop: | 6X5 / 7x3 | | Max. Power: | 105W | | attraction: | 350g | |
|
|
|
|
|
CanadairWasserflugzeug
| #54 |
 |
Canadair Wasserflug-Spass mit geringstem Montageaufwand. Dank höchster Vorfertigung beschränkt sich die Montage auf das Aufsetzen der Tragfläche, Leitwerke und lediglich ein paar weiteren Handgriffen. Ideal als Urlaubsflieger - und durch den leisen, kraftvollen Brushless-Elektroantrieb praktisch immer und überall einsetzbar. Sollte mal kein Gewässer zur Verfügung stehen: Handstart und Bodenlandung auf Gras oder Schnee ist ebenfalls möglich.
Das Modell verfügt über ein sehr ansprechendes, mehrfarbig lackiertes Finish und hohe Detaillierung. Der Akkuwechsel erfolgt bequem von oben durch das einfach abnehmbare Cockpit. Die Querruder werden mit zwei Servos angesteuert. Zum Betrieb des Modells wird eine 4-Kanal Fernsteuerung sowie ein LiPo Akku benötigt.
Lieferumfang:
* Fertigmodell aus EPS Formschaum
* Fertig lackiert wie abgebildet
* 2 x Brushless-Motor
* 2 x Brushless-Regler mit integrierter Empfängerstromversorgung (BEC)
* 4 x Mini-Servos
* Anlenkungen, Kleinteile
* Dekorbogen und Montagehinweise
| Technische Daten * | | Spannweite mm | 1390 | | Länge mm | 970 | | Gewicht g | 850 | | Im Lieferumfang (teilweise vormontiert) | 2 x Brushless Motor PICHLER (Außenläufer)
2 x Brushless Regler PICHLER
4 x Mini-Servo PICHLER | | Sonderzubehör | LiPo Akku RED POWER 2200-11.1V, # C2158 |
* Technische Änderungen und Irrtümer vorbehalten |
|
|
|
Catalina (weiß/rot) ARF Wasserflugzeug
| #55 |
 |
Model Airplane made from EPS foam * RFR (Ready For Radio) * WSP 1380mm *
Expertly painted by color airbrush
* Comes complete with two brushless-motors, Brushless ESC and 4 Servos |
|
|
|
|
|
Coaxial helicopter Carson BIG CFG
| #57 |
 |
RC Radio controlled in- and outdoor helicopter RTF
Carson Big CFG
The big brother of all co-axial helicopters.
The perfect entry-level training helicopter for in-or outdoor use.
All you need is a short practice before you are able to make your first hover flight. Because it has two rotorblades spinning in opposite directions. (co-axial) which dampen down the helicopters natural tendency to rotate on the yaw axis.
The included lithium polymer battery gives flying times of 8-10 minutes.
Technical data:
Lenght: 440 mm
Version: Big CFG
Rotors-Ø: 445 mm |
|
|
|
|
|
Combination Pliers 160mm (6")
| #59 |
 |
Kombizange 160mm (6")
Professional quality for heavy duty use
+ precise joint for optimum leverage
+ induction-hardend cutting edge 60 / 64 HRC
+ ergonomically refined design for maximum comfort
+ 2komponent handle technology
+ GS tested for safety
|
|
|
|
|
|
COMFORCE protorq Universal-Set
| #61 |
 |
COMFORCE protorq - Universal Set 1 COMFORCE protorq handle with ratched, 4 reversible blades (175 mm), 1 Adapter.
With this set you have 8 different screwdrivers with our PROTORQ ratched handle. The included adapter allow you to use any other Bitsize you may need. Protorq handle is flexible and well designed to transmit high torq where ever you need.
A great solution for flexible work.
|
|
|
|
|
|
Cross head screwdriver
| #63 |
 |
Crosshead screwdriver Phillips (PH) with hexagon bolster PH 1; PH 2; PH3
Robust standard screwdriver for enterprises and do-it-yourselfer. |
|
|
|
|
|
|
|
Cross head screwdriver EXATORQ bitmix
| #66 |
 |
Crosshead screwdriver EXATORQ-PHZ bitmix 1 x 80mm
Screwdriver PHZ1
One tool for PH and PZ screws only!
PHZ 1 x 80, tool= 80, total lenght= 180 mm
Here is the right one!
The PHZ-Bit from Schröder offers the solution: it can be used either for Pozidriv or Phillps screws. It can easily be recognized by its shape and the golden tip. The bit is coated on a titanium nitrite basis, so that the PHZ-Bit is also highly durable. Specially for carpenters and dry mortarless constructors, the PHZ-Bit offers big advantage, because the screws in this field often have both types of driver, Pozidriv or Phillps. With the PHZ-Bit you only need size 1,2 and 3 and they cover 6 sizes of Pozidriv or Phillps screw. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Cross head screwdriver PH+PZ
| #77 |
 |
Crosshead screwdriver (PH) and (PZ) Phillips Pozidriv Made in Germany, GS-checked according to DIN 5260 / 5261 / 5262 ISO 8764
Quality screwdriver for enterprises and quality oriented selfmade.
|
|
|
|
Cross head screwdriver PH+PZ with extra long 300mm blade
| #78 |
 |
Crosshead screwdriver EXAGON-PLUS with extra long 300mm blade.
Phillips PH1,PH2,PH4
Pozidriv PZ1 / PZ2 / PZ4 Made in Germany,
GS-checked according to DIN 5260 / 5261 / 5262 ISO 8764 Quality screwdriver for multi purpose use. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Cross head screwdriver VDE bitmix
| #88 |
 |
Screwdriver EXATORQ PHZ VDE bitmix
First screwdriver for PH and PZ, combined in one tool.
Here is the right one!
The PHZ-Bit from Schröder offers the solution: it can be used either for Pozidriv or Phillps screws. It can easily be recognized by its shape and the golden tip. The bit is coated on a titanium nitrite basis, so that the PHZ-Bit is also highly durable. Specially for carpenters and dry mortarless constructors, the PHZ-Bit offers big advantage, because the screws in this field often have both types of driver, Pozidriv or Phillps. With the PHZ-Bit you only need size 1,2 and 3 and they cover 6 sizes of Pozidriv or Phillps screw. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Dean to EC3
| #122 |
 |
EC3 Device & Battery Female Connector, Capable of 60 continuous amps Ergonomically pleasing and easy to grip Protected to avoid shorting and reverse polarity Superior technology suited to today's advanced applications Designed with convenience and reliability in mind. DYS Heavy duty Deans Connector
|
|
|
|
Dean to EC3
| #123 |
 |
EC3 Device & Battery Male Connector, Capable of 60 continuous amps Ergonomically pleasing and easy to grip Protected to avoid shorting and reverse polarity Superior technology suited to today's advanced applications Designed with convenience and reliability in mind. DYS Heavy duty Deans Connector
|
|
|
|
|
|
DF -032 Panther Combo Set EPO 850mm
| #125 |
 |
DF-032 Panther (combo)
The Wings Maker DF-032C Panther (combo NOT Assembled) - Delta manufactured from tough EPO Foam
Code No. : GE032C
Wing Span : 33 in / 850 mm
Wing Area : 299 sq in / 19.3 sq dm
Flying Weight : 24 oz / 680 g
Fuselage Length : 26.5 in / 675 mm
Requires : 3-channel "mixing radio" (elevator and aileron), 30A (burst 35A) brushless ESC and 3 cells 11.1V 15C 2100mAh battery and charger
 |
|
|
|
Diagonal Nippers 145mm (6")
| #126 |
 |
Diagonal Nippers 145mm (6")
Professional quality for heavy duty use
+ precise joint for optimum leverage
+ induction-hardend cutting edge 60 / 64 HRC
+ ergonomically refined design for maximum comfort
+ 2komponent handle technology
+ GS tested for safety
|
|
|
|
Diagonal Nippers 160mm (6")
| #127 |
|
|
Diagonal Nippers 160mm (6")
Professional quality for heavy duty use
+ precise joint for optimum leverage
+ induction-hardend cutting edge 60 / 64 HRC
+ ergonomically refined design for maximum comfort
+ 2komponent handle technology
+ GS tested for safety
|
|
|
|
|
|
|
|
|
|
Dromader Bauplan 1500mm
| #131 |
 |
Dromader drawing
Semi-Scale-Elektro Airplane Size 1:12
Medium: Drawing
Schwierigkeitsgrad: easy
Umfang: A0 drawing
1. Auflage
Published: 01. 01. 2008 1475 mm wing span, 800 mm length, 700 g |
|
|
|
Dromader Bauplan 3540mm, 1:5
| #132 |
 |
Dromader drawing
Semi-Scale- Airplane Size 1:5
Medium: Drawing
1. Auflage
Published: 01. 04. 2009 The new version of Heiko Preislers Dromader 1:5 with 3540mm wingspan, Engine recomendation the ZG-80 Boxer.
3540 mm wing span, 1850 mm length, 17kg 3 Drawings 90x200cm one drawing 90x70 cm
|
|
|
|
DVD 1. Deutsche Meisterschaft im Formationsfliegen mit Jetmodellen
| #133 |
 |
1. Internationale Deutsche Meisterschaft im Formationsfliegen mit Jetmodellen  Vom 6. bis 8. August fand in Müllheim bei Freiburg die 1. Internationale Deutsche Meisterschaft im Formationsfliegen mit Jetmodellen statt. Begleitet von Musik und Raucheffekten wurden Höchstleistungen geboten. Teams aus England, Italien, der Schweiz, Frankreich und Deutschland zeigten atemberaubende Vorführungen mit bis zu drei Jets. Sehen Sie auf dieser DVD nicht nur die Flüge der Teams, sondern auch die Teampiloten im Interview. Laufzeit: ca. 60 min, Deutsch
Format: PAL 16.9, gedreht in HD Artikelinformationen
Medium: DVD
Erscheinungstermin: 28. 10. 2010
|
|
|
|
|
|
DVD Die Modellbauer - Leidenschaft nach Maß
| #135 |
 |
DVD Die Modellbauer - Leidenschaft nach Maß Modellbau ist in Deutschland populär wie nie! Unzählige Arbeitsstunden und Tausende von Euro investieren Hobby-Bastler und Profibauer, um sich als Kapitän, Pilot oder Rennfahrer maßstabsgetreu ihre Kindheitsträume zu erfüllen. Für neidvolle Blicke seitens der Konkurrenz und einen gelungenen Auftritt bei der Jungfernfahrt scheuen die Bastel-Freaks weder Mühen noch Kosten. Und wenn der Mini-Flitzer auf der Rennstrecke seine erste Bestzeit fährt, oder der LKW-Nachbau seine erste Fuhre abliefert, fängt der Spaß erst richtig an. Die kleinen Kunstwerke können ihren Original-Vorbildern nämlich nicht nur optisch das Wasser reichen, sondern sind in der Regel auch voll funktionsfähig. Die Reality-Doku schaut in die Werkstätten und Bastelkeller der Modellbau-Cracks und zeigt in sechs Episoden, wozu Deutschlands Konstruktions-Experten fähig sind.
Die Laufzeit beträgt ca. 270 min. Artikelinformationen
Medium: DVD
Erscheinungstermin: 25. 06. 2010
|
|
|
|
|
|
DVD Jahresübersicht Modell 2009
| #137 |
 |
Jahresübersicht Modell 2009 Inhalt aller 12 Ausgaben aus dem Jahr 2009. Alle Beiträge sind als PDF-Dateien auf der CD hinterlegt und können über komfortable Oberflächen gesucht werden. Ein Autoren- und Themenverzeichnis erleichtert die Übersicht ebenso wie eine chronologische Anordnung. Der komplette Jahrgang auf einer CD. Artikelinformationen
Medium: CD-Rom
Erscheinungstermin: 01. 04. 2010
Systemvoraussetzungen: IBM-kompatibler PC 486 oder höher, mit CD-ROM- oder DVD-Laufwerk, Windows 9X/NT/2000/XP/Vista sowie ein Adobe Acrobat Reader. |
|
|
|
DVD Jahresübersicht SchiffsModell 2009
| #138 |
 |
Jahresübersicht SchiffsModell 2009 Artikelinformationen
Medium: CD-Rom
Erscheinungstermin: 01. 04. 2010 Systemvoraussetzungen: IBM-kompatibler PC 486 oder höher, CD-ROM- oder DVD-Laufwerk, Windows 9X/NT/2000/XP/Vista sowie ein Adobe Acrobat Reader. |
|
|
|
E-prop 7x3,5
| #139 |
 |
E-Propeller 7x3,4in Perfect for smal airpaines like Park- and Slowflyer.
Fit together with our BL D10-60W No. 711-060 |
|
|
|
E-prop 8x6
| #140 |
|
|
E-Propeller 7x3,4in Perfect for smal airpaines like Park- and Slowflyer.
Fit together with our BL D10-60W No. 711-060 |
|
|
|
E-Prop 10x6 schwarz
| #141 |
 |
NEW! Aerodynamic optimized E-Propeller
9x6" (25,5 x 15 cm)
for electro flight
|
|
|
|
E-prop 6x3 schwarz
| #142 |
|
|
NEW! Aerodynamic optimized E-Propeller
6x3" (15,3 x 7,6 cm)
for electro flight
|
|
|
|
E-prop 8x4 schwarz
| #143 |
|
|
NEW! Aerodynamic optimized E-Propeller
8 x 4" (20 x 10 cm)
for electro flight
|
|
|
|
E-prop 9x3,8 schwarz
| #144 |
|
|
NEW! Aerodynamic optimized E-Propeller
9 x 3,8 (22,8 x 9,6 cm)
for electro flight
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Electronic screwdriver set 5tlg.
| #153 |
 |
Electronic screwdriver set 5 high grade screwdrivers for cross head and sloted screws
PH 0 x 60 / PH 1 x 80  2,5 x 60 / 3,0 x 100 / 3,5 x 100 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Engineers pattern screwdriver with hexagon bolster
| #176 |
 |
Engineers pattern screwdriver with hexagon bolster Available in 5 different sizes from:
1,0 x 5,5mm lenght 100mm up to
2,0 x 12mm lenght 200mm Top quality screwdriver, a convenient solution as a competitive price.
|
|
|
|
|
|
|
|
Epoxy Universal 30min Epoxy 27g
| #179 |
 |
Universal 30 min Epoxy in praktischem Spender, 27g
Geeignet für alle Montage- und Reparaturarbeiten.
Verarbeitungszeit 30 Minuten |
|
|
|
Epoxy Universal 5min Epoxy 27g
| #180 |
 |
Universal 5 min Epoxy in praktischem Spender, 27g
Geeignet für alle Montage- und Reparaturarbeiten.
Verarbeitungszeit 30 Minuten |
|
|
|
Epoxydharz 6min
| #181 |
 |
Durax 200 Gramm 5 min Epoxy
Lösungsmittelfreier 2 Komponenten Harz für Holz, GFK, Metall, Keramik, Styropor und vieles mehr.
Nach 10 Minuten belastbar. Verarbeitungszeit 5 Minuten. Für alle Schnellreparaturen
hochfeste 2 Komponenten Klebeverbindung.
Mischungsverhältnis 1:1
Geliefert wird 100g Harz plus 100g Härter
|
|
|
|
ESD screwdriver box 6pcs
| #182 |
 |
Felo ESD-Safe screwdriver box 6 pcs.
The set contains the following sizes:
 x4 1,5 x 60 / 2,0 x 60 / 2,5 x 60 / 3,0 x 60
 x2 Phillips 00 x 60 / Phillips 0 x 60  |
|
|
|
|
|
|
|
|
|
Extra 300 E ARF Balsa BL-Motor 1030mm
| #186 |
 |
Extra 300 ARF Extra 300 E ARF with brushless motor wingspan: 1030mm
lenght: 880mm
performance: 17.0dm2
weight: ca.690g
RC: 4K/4Servo
Motor: Brushless motor included |
|
|
|
Extra 330 SC
| #187 |
 |
Extra 330 SC
Ein modernes Kunstflugmodell, mit dem Sie fast risikolos die verrücktesten Kunstflugmanöver trainieren können. Das Modell beherrscht sämtliche Kunstflugfiguren (inkl. 3D Flug) und nur der Pilot setzt hier das Limit. Es handelt sich hier um ein Fast-Fertigmodell aus dem leichten und besonders robusten EPP Schaum. Die Tragfläche ist voll profiliert. Das Modell ist werksseitig bereits fertig lackiert wie abgebildet. Die Flugeigenschaften sind von bestechender Präzision und Neutralität.
Lieferumfang:
* Fertigbauteile aus leichtem, robustem EPP Schaum
* Fertig gefräst und mehrfarbig lackiert
* Stabiles Hauptfahrwerk
* Zubehör für R/C Einbau
* Ausführliche, bebilderte Anleitung
| Technische Daten * | | Spannweite mm | 1200 | | Länge mm | 1230 | | Gewicht g | 770 | | R/C Funktionen | Seitenruder
Höhenruder
Querruder
Motorregler | Sonderzubehör
(empfohlen) | BOOST 25 Brushless Combo, # C2981
Mini Servo MASTER S2112 (x4), # C5185
LiPo Akku RED POWER 2200-11,1V, # C2158 |
* Technische Änderungen und Irrtümer vorbehalten |
|
|
|
Extreme X605 Digital charger and LiPo balancer 50W
| #188 |
 |
X-605 EXTREME CHARGER Balance Charger/Discharger For NiCd/NiMh/Lithium/PB Batteries The X-Charger B6 is an entry level balancing charger and discharger which can handle up to 6 cells and 5A.
The B6 will handle LiPo/LiFe up to 6S and NiMH/NiCd up to 15S and shows individual cell voltage during charge with realtime updates throughout the charge cycle.
Bundled with the X-Charger is a bunch of input and output wires which should satisfy any charging requirement.
The integrated fan avoide overheating in fast charging mode. The B6 can use indoor as well as outdoor. With the included 12V power connector cable it can easy connect to a car batterie.
Maximum security with integrated safety timer. The processor monitors the voltage of individual cells and try to normalise the voltage to be equal.
Optimized operating software charger with integrated safety timer. - LiPo/LiLo/LiFe: 1-6 cells 3,7-22,4V; 0,1-5A
- LiPo/LiLo/LiFe in balancer mode: 1-6 cells 3,7-22,4V, 0,1-5A
- NiCd/NiMh: 1-15 cells 1,2-18V, 0,1-5A
- PB 2-20V
- charge/discharge up to 5 cycles
- Fast charging program for Lithium batteries
- PC based analysis using USB communication graph of voltage, current, capacity
- Data storage and load programm for your convenience.
- 16 chr + 2 lines LCD-screen
- Input power cable 11-18V DC
- Individual connection cable for most RC-usage
- Balancer connector: XH
|
|
|
|
E_Sky Nano Servo EK2-0500
| #189 |
 |
E_Sky Nano SERVO EK2-0500
Technische Daten:
Bei 4,8V 1,3 kg/cm
Speed: 0,12sek/60°
Use for: Planes, Slow-flyer, Helicopter
Dimensions: 22,8x11,5x20,8 mm
Weight: 8.0 g
|
|
|
|
|
|
Felo chunky screwdriver with bitholder
| #191 |
 |
Magazine Handle with bitholder for power tool on card This outstanding Felo Bit Boy 8-in-1 Screwdriver is only 6.3 inches long. The seamless telescopic cap makes for easy access to the 7 Phillips, Slotted, and Square bits stored under it. The removable magnetized bit driver holder, where the eighth bit is ready for use, has great holding power to keep a fastener tight into the bit. Bits are easy to replace into the stainless steel sleeve. The handle with its pleasant soft outer material and comfortable grip helps to deliver the highest torques. The handle is twice the length of the bit driver, a design that allows full hand concentration around the handle to deliver the required torque necessary to remove stubborn fasters. This all-around versatile Bit-Boy 8-in-1 screwdriver is manufactured in Germany of the finest-quality materials and tested to the highest standards to maintain a lifetime of use. |
|
|
|
|
|
|
|
Felo chunky screwdriver with long bitholder
| #194 |
 |
Magazine Handle with Ratchet for power tool on card This outstanding Felo Bit Boy 8-in-1 Screwdriver is only 6.3 inches long. The seamless telescopic cap makes for easy access to the 7 Phillips, Slotted, and Square bits stored under it. The removable magnetized bit driver holder, where the eighth bit is ready for use, has great holding power to keep a fastener tight into the bit. Bits are easy to replace into the stainless steel sleeve. The handle with its pleasant soft outer material and comfortable grip helps to deliver the highest torques. The handle is twice the length of the bit driver, a design that allows full hand concentration around the handle to deliver the required torque necessary to remove stubborn fasters. This all-around versatile Bit-Boy 8-in-1 screwdriver is manufactured in Germany of the finest-quality materials and tested to the highest standards to maintain a lifetime of use. |
|
|
|
|
|
|
|
Felo chunky screwdriver with Ratchet
| #197 |
 |
Magazine Handle with Ratchet for power tool on card This outstanding Felo Bit Boy 8-in-1 Screwdriver is only 6.3 inches long. The seamless telescopic cap makes for easy access to the 7 Phillips, Slotted, and Square bits stored under it. The removable magnetized bit driver holder, where the eighth bit is ready for use, has great holding power to keep a fastener tight into the bit. Bits are easy to replace into the stainless steel sleeve. The handle with its pleasant soft outer material and comfortable grip helps to deliver the highest torques. The handle is twice the length of the bit driver, a design that allows full hand concentration around the handle to deliver the required torque necessary to remove stubborn fasters. This all-around versatile Bit-Boy 8-in-1 screwdriver is manufactured in Germany of the finest-quality materials and tested to the highest standards to maintain a lifetime of use. |
|
|
|
|
|
|
|
Felo E-SMART / Box 14-pce
| #200 |
 |
The first compact smart tool for electricians
Screwdriver - Original felo 2K technology and blade made from Chrome-Molybdenum-Vanadium steel with black-tip for precision fit. Every screwdriver individually tested to 10.000 Volts,
fully conforming ti DIN EN 60900.
Secure fit of blades, quick-release button on handle against unwantes extraction
precision cap and soft-grip zone on blades for low torque application 12 x Blade
2,5 x 0,4 / 3,0 x 0,5 / 3,5 x 0,6 / 4,0 x 0,8 / 5,5 x 1,0 / 6,5 x 1,2
PH1 / PH2 / PZ2
Torx10 / Torx15 / Torx20
1 x Handle 95 x 32mm
1 x Precision Cap
felo Strongbox 230mm, 130mm, 56mm
|
|
|
|
Felo E-SMART Handle
| #201 |
 |
The first compact smart tool for electricians
Screwdriver - Original felo 2K technology and blade made from Chrome-Molybdenum-Vanadium steel with black-tip for precision fit. Every screwdriver individually tested to 10.000 Volts,
fully conforming ti DIN EN 60900.
Secure fit of blades, quick-release button on handle against unwantes extraction
precision cap and soft-grip zone on blades for low torque application |
|
|
|
Felo E-SMART Industry / Box 14-pce
| #202 |
 |
The first compact smart tool for electricians
Screwdriver - Original felo 2K technology and blade made from Chrome-Molybdenum-Vanadium steel with black-tip for precision fit. Every screwdriver individually tested to 10.000 Volts,
fully conforming ti DIN EN 60900.
Secure fit of blades, quick-release button on handle against unwantes extraction
precision cap and soft-grip zone on blades for low torque application 12 x Blade
2,5 x 0,4 / 3,0 x 0,5 / 3,5 x 0,6 / 4,0 x 0,8 / 5,5 x 1,0 / 6,5 x 1,2
PH1 / PH2 / PZ2 / Z2
1 x Bit: Spanner 10 x 25
1 x Universal Cabinet key
1 x Handle 95 x 32mm
1 x Precision Cap
felo Strongbox 230mm, 130mm, 56mm
|
|
|
|
Felo E-SMART reversable blades
| #203 |
 |
Reversable blades felo e-smart for electricians
Precision cap and soft-grip zone on blades for low torque application. Every screwdriver individually tested to 10.000 Volts, fully conforming to DIN EN 60900.
Secure fit of blades, quick-release button on handle against unwantes extraction. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Felo E-SMART Zip-Bag 19-pcs
| #215 |
 |
The first compact smart tool for electricians
Screwdriver - Original felo 2K technology and blade made from Chrome-Molybdenum-Vanadium steel with black-tip for precision fit. Every screwdriver individually tested to 10.000 Volts,
fully conforming ti DIN EN 60900.
Secure fit of blades, quick-release button on handle against unwantes extraction
precision cap and soft-grip zone on blades for low torque application 14 x Blade
2,5 x 0,4 / 3,0 x 0,5 / 3,5 x 0,6 / 4,0 x 0,8 / 5,5 x 1,0 / 6,5 x 1,2
PH1 / PH2 / PZ2
Torx 10 / Torx 15 / Torx 20
H2 / Z2
1 x Handle 95 x 32mm
1 x Precision Cap
1 x Combination Pilers 180mm
1 x Diagonal Nippers 160mm
1 x Mains testing Screwdriver 3,0 x 70
(VDE 0680/6, 150-250 Volt)
Nylon Bag |
|
|
|
|
|
|
|
|
|
Felo electronic screwdriver sets
| #219 |
 |
Felo precision screwdriver set series 280
Handle: - freely rotation cap for minimal friction
- the blade length is variable
- hanging hole for easy storage or inserting lever
Blade:
- baldes manufactured from chrome-molybdenum-vanadium steel
- ergonomically refined design
- anti-roll handle design
- superior torque which exceeds DIN and ISO requirements by up to 100%
 You can chosse between three different sets.
|
|
|
|
Felo ERGONIC hexagon nut driver
| #220 |
 |
Serie 400 ERGONIC The impact proof handle core is coated with elastic, scratch resistant elastomer
containing cells of highly flexible plastics . blades manufactured frome chrome-molybdenum-vanadium steel The handle fits perfectly into the hand at all times. Hand and handle interlock,
causing less strain and work fatigue, allowing higher maximum torque!
Responsiveness of material results in enhanced sensitivity and perfect control of torque. superior torque wich exceeds DIN and ISO requirements by up to 100% screw symbols on handle cap
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Felo Ergonic scredriver set 6 tools
| #226 |
 |
Serie 400 ERGONIC Kreuzschraubendreher Satz 2 x 410: Flat blade 5,5 x 100 / 6,5 x 125
2 x 411: PZ 1 x 80 / PZ 2 x 100
2 x 412: PH 1 x 80 / PH 2 x 100 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Felo Ergonic screwdriver flat blade [41002240]
| #243 |
 |
Felo Ergonic screwdriver Series 400
flat blade
* hexagon bolsters available on series 400
* blades manufactured from chrome-molybdenum-vanadium steel
* black-tip for precision fit
* anti-roll handle design
* GS tested for safety
* screw symbols on handle cap
* hanging hole for easy storage or inserting lever
* clear printing and EAN-Code on every product
|
|
|
|
Felo Ergonic screwdriver flat blade [41004240]
| #244 |
 |
Felo Ergonic screwdriver Series 410
flat blade
* hexagon bolsters available on series 410
* blades manufactured from chrome-molybdenum-vanadium steel
* black-tip for precision fit
* anti-roll handle design
* GS tested for safety
* screw symbols on handle cap
* hanging hole for easy storage or inserting lever
* clear printing and EAN-Code on every product
|
|
|
|
Felo ERGONIC screwdriver PH
| #245 |
 |
Serie 400 ERGONIC The impact proof handle core is coated with elastic, scratch resistant elastomer
containing cells of highly flexible plastics .  blades manufactured frome chrome-molybdenum-vanadium steel The handle fits perfectly into the hand at all times. Hand and handle interlock,
causing less strain and work fatigue, allowing higher maximum torque!
Responsiveness of material results in enhanced sensitivity and perfect control of torque. superior torque wich exceeds DIN and ISO requirements by up to 100% 
screw symbols on handle cap
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Felo ERGONIC screwdriver PZ
| #251 |
 |
Serie 400 ERGONIC The impact proof handle core is coated with elastic, scratch resistant elastomer
containing cells of highly flexible plastics . blades manufactured frome chrome-molybdenum-vanadium steel The handle fits perfectly into the hand at all times. Hand and handle interlock, causing less strain and work fatigue, allowing higher maximum torque!
Responsiveness of material results in enhanced sensitivity and perfect control of torque. superior torque wich exceeds DIN and ISO requirements by up to 100%
screw symbols on handle cap
|
|
|
|
|
|
|
|
|
|
Felo ERGONIC Torx screwdriver
| #255 |
 |
Serie 400 ERGONIC Professional screw driver tools 'Made by Felo in Germany'
Warranty for superior quality and long durability.
Handle:
Handle core containing cells of high flexible elastic plastics. The handle fits perfectly into the hand at all times. Hand and handle interlock, causing less strain and work fatigue, allowing higher maximum torque!
Responsiveness of material results in enhanced sensitivity and perfect control of torque.
Blade:
Blade manufactured frome chrome-molybdenum-vanadium steel carefully hardened for precision and long life time.
Superior torque screw drivers which exceeds DIN and ISO requirements up to 100%.
Screw symbols on handle cap.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Felo ERGONIC VDE hexagon nut driver
| #261 |
 |
Serie 400 ERGONIC The impact proof handle core is coated with elastic, scratch resistant elastomer
containing cells of highly flexible plastics . blades manufactured frome chrome-molybdenum-vanadium steel The handle fits perfectly into the hand at all times. Hand and handle interlock,
causing less strain and work fatigue, allowing higher maximum torque!
Responsiveness of material results in enhanced sensitivity and perfect control of torque. superior torque wich exceeds DIN and ISO requirements by up to 100% 
screw symbols on handle cap
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Felo ERGONIC VDE hexagon nut driver set 5 pcs
| #267 |
|
|
Serie 400 ERGONIC The impact proof handle core is coated with elastic, scratch resistant elastomer
containing cells of highly flexible plastics . blades manufactured frome chrome-molybdenum-vanadium steel The handle fits perfectly into the hand at all times. Hand and handle interlock, causing less strain and work fatigue, allowing higher maximum torque!
Responsiveness of material results in enhanced sensitivity and perfect control of torque. superior torque wich exceeds DIN and ISO requirements by up to 100% screw symbols on handle cap
|
|
|
|
Felo ERGONIC VDE screwdriver
| #268 |
 |
Serie 400 ERGONIC The impact proof handle core is coated with elastic, scratch resistant elastomer
containing cells of highly flexible plastics . blades manufactured frome chrome-molybdenum-vanadium steel The handle fits perfectly into the hand at all times. Hand and handle interlock,
causing less strain and work fatigue, allowing higher maximum torque!
Responsiveness of material results in enhanced sensitivity and perfect control of torque. superior torque wich exceeds DIN and ISO requirements by up to 100% 
screw symbols on handle cap
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Felo ERGONIC VDE screwdriver PH
| #274 |
 |
Serie 400 ERGONIC The impact proof handle core is coated with elastic, scratch resistant elastomer
containing cells of highly flexible plastics . blades manufactured frome chrome-molybdenum-vanadium steel The handle fits perfectly into the hand at all times. Hand and handle interlock,
causing less strain and work fatigue, allowing higher maximum torque!
Responsiveness of material results in enhanced sensitivity and perfect control of torque. superior torque wich exceeds DIN and ISO requirements by up to 100%
screw symbols on handle cap
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Felo ERGONIC VDE screwdriver set 3 pcs
| #282 |
 |
Serie 400 ERGONIC The impact proof handle core is coated with elastic, scratch resistant elastomer
containing cells of highly flexible plastics . blades manufactured frome chrome-molybdenum-vanadium steel The handle fits perfectly into the hand at all times. Hand and handle interlock,
causing less strain and work fatigue, allowing higher maximum torque!
Responsiveness of material results in enhanced sensitivity and perfect control of torque. superior torque wich exceeds DIN and ISO requirements by up to 100%
screw symbols on handle cap The set contains the following sizes:
x2 4,0 x 100 / 5,5 x 125 x1 PH2 x 100 |
|
|
|
Felo ERGONIC VDE screwdriver set 6 pcs
| #283 |
 |
Serie 400 ERGONIC The impact proof handle core is coated with elastic, scratch resistant elastomer
containing cells of highly flexible plastics . blades manufactured frome chrome-molybdenum-vanadium steel The handle fits perfectly into the hand at all times. Hand and handle interlock,
causing less strain and work fatigue, allowing higher maximum torque!
Responsiveness of material results in enhanced sensitivity and perfect control of torque. superior torque wich exceeds DIN and ISO requirements by up to 100%
screw symbols on handle cap The set contains the following sizes:
x4 3,0 x 100 / 4,0 x 100 / 5,5 x 125 / 6,5 x 150 x2 PH1 x 80 / PH2 x 100 |
|
|
|
Felo Hexagon T-Grip
| #284 |
 |
Profi Hexagon T-Griffe
Made by professionals for professionals
Screwdriver - Original felo 2K technology and blade made from Chrome-Molybdenum-Vanadium steel with black-tip for precision fit.
Pleasant soft-grip outer material for highest torque and anti-roll handle design. Performance and highest precision.
Without softgrip coating: With softgrip coating: extreme pressure points reduced pressure points
matt chrome-plated blades with black tips for precision fit
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Felo Insulation Stripping Pliers
| #309 |
 |
Felo Insulation Stripping Pliers 160mm
Professional quality for heavy duty use
+ precise joint for optimum leverage
+ induction-hardend cutting edge 60 / 64 HRC
+ ergonomically refined design for maximum comfort
+ 2komponent handle technology
+ GS tested for safety |
|
|
|
Felo Pincers
| #310 |
 |
Felo Pincers 160mm
Professional quality for heavy duty use
+ precise joint for optimum leverage
+ induction-hardend cutting edge 60 / 64 HRC
+ ergonomically refined design for maximum comfort
+ 2komponent handle technology
+ GS tested for safety |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Felo precision hexagon screwdriver series 246
| #317 |
 |
Felo precision hexagon screwdriver series 246
 Hexagon screwdriver (high quality for a budget price)
* freely rotating cap for minimal friction
* pleasant soft grip outer material for added comfort
* black-tip for precision fit
* blades manufactured from chrome-molybdenum-vanadium steel
* hanging hole for easy storage or inserting lever
* clear printing and EAN-Code on every product |
|
|
|
Felo precision nut screwdriver
| #318 |
 |
Felo Precision nut screwdriver Series 249
 hexagon nut driver
* freely rotating cap for minimal friction
* pleasant soft grip outer material for added comfort
* black-tip for precision fit
* blades manufactured from chrome-molybdenum-vanadium steel
* hanging hole for easy storage or inserting lever
* clear printing and EAN-Code on every product
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Felo precision screwdriver blades
| #328 |
 |
Felo precision screwdriver blades for the serie 280
Blade:
- baldes manufactured from chrome-molybdenum-vanadium steel
- ergonomically refined design
- anti-roll handle design
- superior torque which exceeds DIN and ISO requirements by up to 100%
You can chosse between different blades.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Felo precision screwdriver flat blade
| #341 |
 |
Felo Precision screwdriver Series 240
flat blade
* freely rotating cap for minimal friction
* pleasant soft grip outer material for added comfort
* black-tip for precision fit
* blades manufactured from chrome-molybdenum-vanadium steel
* hanging hole for easy storage or inserting lever
* clear printing and EAN-Code on every product
|
|
|
|
Felo precision screwdriver phillips
| #342 |
 |
Felo Precision screwdriver Series 240
Phillips
* freely rotating cap for minimal friction
* pleasant soft grip outer material for added comfort
* black-tip for precision fit
* blades manufactured from chrome-molybdenum-vanadium steel
* hanging hole for easy storage or inserting lever
* clear printing and EAN-Code on every product
|
|
|
|
|
|
|
|
|
|
Felo precision screwdriver set 6pc.
| #346 |
 |
Felo precision screwdriver set series 240
6 high grade quality screwdrivers perfect for R/C modellers
PH 00 x 60 / PH 0 x 60 1,5 x 60 / 2,0 x 60 / 2,5 x 60 3,0 x 60
|
|
|
|
Felo Precision Torque Screwdrivers 0,6 - 1,5 Nm
| #347 |
 |
FELO Series Nm 100
Precise adjustable Torque Screwdriver
0,6 - 1,5 Nm(5,3 - 13,3 Inch Pounds)
include adjustment tool Advantages: * easy adjustment of torque
* precise release - accoustic and mechanic signal
* superior performance exceed DIN and ISO requirements
* ergonomically designed handle in best FELO 2-K quality
* exchangeable blades for greatest flexibility
* 15 years warranty on material and workmanship Quality assurance: Each tool is standardised with electronic measurement equipment at 23 deg. C to its nominal torque. Results are documented on the certificate with unique serial no.
Included in delivery: - FELO Torq screwdriver handle
- adjustment tool
- Calibration Certificate (torque measurement)
- handling instruction
- Torque conversion chart Newton / Pounds Suitable blades for Felo Torque screwdriver handle click here.
|
|
|
|
Felo Precision Torque Screwdrivers 1,5 - 3,0 Nm
| #348 |
 |
FELO Series Nm 100
Precise adjustable Torque Screwdriver
1,5 - 3,0 Nm(13,3 - 26,6 Inch Pounds)
include adjustment tool Advantages: * easy adjustment of torque
* precise release - accoustic and mechanic signal
* superior performance exceed DIN and ISO requirements
* ergonomically designed handle in best FELO 2-K quality
* exchangeable blades for greatest flexibility
* 15 years warranty on material and workmanship Quality assurance: Each tool is standardised with electronic measurement equipment at 23 deg. C to its nominal torque. Results are documented on the certificate with unique serial no.
Included in delivery: - FELO Torq screwdriver handle
- adjustment tool
- Calibration Certificate (torque measurement)
- handling instruction
- Torque conversion chart Newton / Pounds Suitable blades for Felo Torque screwdriver handle click here.
|
|
|
|
Felo Precision Torque Screwdrivers 3,0 - 5,4 Nm
| #349 |
 |
FELO Series Nm 100
Precise adjustable Torque Screwdriver
3,0 - 5,4 Nm(26,6 - 47,8 Inch Pounds)
include adjustment tool Advantages: * easy adjustment of torque
* precise release - accoustic and mechanic signal
* superior performance exceed DIN and ISO requirements
* ergonomically designed handle in best FELO 2-K quality
* exchangeable blades for greatest flexibility
* 15 years warranty on material and workmanship Quality assurance: Each tool is standardised with electronic measurement equipment at 23 deg. C to its nominal torque. Results are documented on the certificate with unique serial no.
Included in delivery: - FELO Torq screwdriver handle
- adjustment tool
- Calibration Certificate (torque measurement)
- handling instruction
- Torque conversion chart Newton / Pounds Suitable blades for Felo Torque screwdriver handle click here.
|
|
|
|
|
|
felo profi ratched toolset 29-pcs
| #351 |
 |
Profi tool case by felo
Screwdriver - Original felo 2K technology and blade made from Chrome-Molybdenum-Vanadium steel with black-tip for precision fit.
Pleasant soft-grip outer material for highest torque and anti-roll handle design. Performance and highest precision.
16 x Bits C6,3x25mm:
PH1 / PH2 / PH3 / PZ1 / PZ2 / PZ3
SW5 / SW6 / 3,5x0,6 / 5,0x0,8 / 6,5x1,2
Torx15 / Torx20 / Torx25 / Torx30 / Torx40
1 x Bit Holder with Quick-Realease Chuck
7 x Socket 4mm / 5mm / 5,5mm / 6mm / 8mm / 10mm / 13mm
1 x Adapter 1/4" - C6,3
1 x Extenson 1/4" - E6,3
1 x Extension for Sockets 75mm
1 x Profi Ratchet 1/4" 
|
|
|
|
Felo profi ratched toolset with 29-pcs INCH Version
| #352 |
|
|
Profi tool case by felo
Screwdriver - Original felo 2K technology and blade made from Chrome-Molybdenum-Vanadium steel with black-tip for precision fit.
Pleasant soft-grip outer material for highest torque and anti-roll handle design. Performance and highest precision.
16 x Bits C6,3x25mm:
PH1 / PH2 / PH3 / PZ1 / PZ2 / PZ3
3/16" 1/4" 3,5x0,6 / 5,0x0,8 / 6,5x1,2
TX15 / TX20 / TX25 / TX30 / TX40
1 x Bit Holder with Quick-Release Chuck
7 x Socket
3/16" 7/32" 1/4" 9/32" 5/16" 3/8" 1/2"
1 x Adapter 1/4" - C6,3
1 x Extension 1/4" - E6,3
1 x Extension for Sockets 75mm
1 x Profi Ratchet 1/4"
1 x Handle 105 x 39mm
Tool Box: 220mm, 110mm, 35mm 
|
|
|
|
Felo profi toolcase 5-pcs
| #353 |
 |
Profi tool case by felo
Screwdriver - Original felo 2K technology and blade made from Chrome-Molybdenum-Vanadium steel with black-tip for precision fit.
Pliers - 2K handle technology and induction-hardened cutting edge for outstanding cutting performance and highest precision.
1 x flat blade 0,8 x 4,0 x 100 mm
1 x flat blade 0,8 x 5,5 x 125 mm
1 x PH2 x 100
1 x 2K Combination pliers 180 mm
1 x 2K diagonal nipppers 160 mm |
|
|
|
|
|
|
|
|
|
felo screwdriver toolcase 11-pcs
| #357 |
 |
Profi tool case by felo
Screwdriver - Original felo 2K technology and blade made from Chrome-Molybdenum-Vanadium steel with black-tip for precision fit.
Pleasant soft-grip outer material for highest torque.
1,0 x 5,5 x 25 mm
0,8 x 4,0 x 100 mm
1,0 x 5,5 x 125 mm
1,2 x 6,5 x 150 mm 1 x PZ (Superdriv-):
PZ 2 x 100 3 x PH (Phillips):
PH 1 x 80
PH 2 x 25
PH 2 x 100 2 x Flat blade:
0,4 x 2,5 x 75 mm
0,6 x 3,5 x 100 mm
1 X Mains testing screwdriver:
VDE 0680/6, 220-250 Volt |
|
|
|
felo screwdriver toolcase 12-pcs
| #358 |
 |
Profi tool case by felo
Screwdriver - Original felo 2K technology and blade made from Chrome-Molybdenum-Vanadium steel with black-tip for precision fit.
Pleasant soft-grip outer material for highest torque and anti-roll handle design. Performance and highest precision.
5 x Flat blade:
1,0 x 5,5 x 25 mm
0,6 X 3,5 x 100 mm
0,8 x 4,0 x 100 mm
1,0 x 5,5 x 125 mm
1,2 x 6,5 x 150 mm 1 x Flat blade:
1,2 x 8,0 x 155 mm 3 x PZ (Superdriv-):
PZ 0 x 60
PZ 1 x 80
PZ 2 x 100 3 x PH (Phillips):
PH 0 x 60
PH 1 x 80
PH 2 x 100 |
|
|
|
Felo screwdriverset 5-pcs serie 200
| #359 |
 |
Serie 400 ERGONIC The impact proof handle core is coated with elastic, scratch resistant elastomer
containing cells of highly flexible plastics . blades manufactured frome chrome-molybdenum-vanadium steel The handle fits perfectly into the hand at all times. Hand and handle interlock,
causing less strain and work fatigue, allowing higher maximum torque!
Responsiveness of material results in enhanced sensitivity and perfect control of torque. superior torque wich exceeds DIN and ISO requirements by up to 100% The set contains the following sizes:
x3 3,5 x 100 / 4,0 x 100 / 5,5 x 125 x2 PH1 x 80 / PH2 x 100 |
|
|
|
Felo screwdriverset 7-pcs serie 200
| #360 |
 |
Serie 400 ERGONIC The impact proof handle core is coated with elastic, scratch resistant elastomer
containing cells of highly flexible plastics . blades manufactured frome chrome-molybdenum-vanadium steel The handle fits perfectly into the hand at all times. Hand and handle interlock,
causing less strain and work fatigue, allowing higher maximum torque!
Responsiveness of material results in enhanced sensitivity and perfect control of torque. superior torque wich exceeds DIN and ISO requirements by up to 100% The set contains the following sizes:
4x : 3,5 x 80 / 4,0 x 100 / 5,5 x 125 / 8,0 x 175
 1x : PZ2 x 100
2x : PH1 x 80 / PH2 x 100 |
|
|
|
|
|
|
|
|
|
|
|
Felo Stubby screwdriver
| #365 |
 |
Felo Stubby Screwdriver Series 200 The impact proof handle core is coated with elastic, scratch resistant elastomer
containing cells of highly flexible plastics . Blades manufactured frome chrome-molybdenum-vanadium steel. The handle fits perfectly into the hand at all times. Hand and handle interlock,
causing less strain and work fatigue, allowing higher maximum torque!
Responsiveness of material results in enhanced sensitivity and perfect control of torque.  Superior torque wich exceeds DIN and ISO requirements by up to 100
|
|
|
|
|
|
|
|
|
|
|
|
Felo Torque Screwdriver Blade
| #370 |
 |
Exchangeable blades for Torque Screwdriver Felo Nm Series 100
and usual Systems with 1/4in (6,35mm) adaptor. Precise manufactured blades made from chrome-molybdenum-vanadium steel
Hardened to superior hardness and ductillity.
Easy changeable with 1/4in (6,35mm) shaft
170mm lenght
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Felo Waterpump pilers
| #394 |
 |
Felo Pincers 160mm
Professional quality for heavy duty use
+ precise joint for optimum leverage
+ induction-hardend cutting edge 60 / 64 HRC
+ ergonomically refined design for maximum comfort
+ 2komponent handle technology
+ GS tested for safety |
|
|
|
Felo-SMART adapter
| #395 |
 |
Add-on blades for the profi tool case
Screwdriver - Original felo 2K technology and blade made from Chrome-Molybdenum-Vanadium steel with black-tip for precision fit.
Performance and highest precision. dimensions: 150mm - E6,3 / 1/4"
|
|
|
|
Felo-SMART belt pouch for T-screwdriver
| #396 |
 |
Profi belt pouch by felo
For screwdriver with Original felo 2K technology and blade made from Chrome-Molybdenum-Vanadium steel with black-tip for precision fit.
The belt pouch be composed of Nylon.
Example: (delivery without tools)
|
|
|
|
Felo-SMART belt pouch with T-screwdriver 9-pcs.
| #397 |
 |
Profi tool case by felo
Screwdriver - Original felo 2K technology and blade made from Chrome-Molybdenum-Vanadium steel with black-tip for precision fit.
Pleasant soft-grip outer material for highest torque and anti-roll handle design. Performance and highest precision.
8 x Blade 1/4" x 160mm
PH1-4,0 / PH2-PH3 / PZ1-5,0 / PZ2-6,0 / PZ3-7,0
SW3-SW4 / SW5-SW6 / Torx06-Torx07 / Torx08-Torx09
Torx10-Torx15 / Torx20-Torx25 / Torx30-Torx40 1 x Handle 105 x 39mm |
|
|
|
Felo-SMART Engineer profi toolset with T-handle 20-pcs. / Inch-Version
| #398 |
 |
Profi tool case by felo
Screwdriver - Original felo 2K technology and blade made from Chrome-Molybdenum-Vanadium steel with black-tip for precision fit.
Pleasant soft-grip outer material for highest torque and anti-roll handle design. Performance and highest precision.
8 x Socket E6,3 x 155mm
7/32" 1/4" 9/32" 5/16" 3/8" 7/16" 1/2" 9/16" 1 x Bitholder 1/4"
8 x Bits C6,3 x 25mm
PH1 / PH2 / PZ1 / PZ2
3,5x0,6 / 5,0x0,8
TX15 / TX20 / TX25 / TX30 1 x Handle 105 x 39mm Metal Case 220mm, 110mm, 35mm
|
|
|
|
Felo-SMART Engineer toolset with T-screwdriver 20-pcs.
| #399 |
|
|
Profi tool case by felo
Screwdriver - Original felo 2K technology and blade made from Chrome-Molybdenum-Vanadium steel with black-tip for precision fit.
Pleasant soft-grip outer material for highest torque and anti-roll handle design. Performance and highest precision.
8 x Socket E6,3 x 155mm
SW5,5 / SW6 / SW7 / SW8 / SW10 / SW11 / SW13 / SW17 1 x Bitholder 1/4"
8 x Bits C6,3 x 25mm
PH1 / PH2 / PZ1 / PZ2
3,5x0,6 / 5,0x0,8
TX15 / TX20 / TX25 / TX30 1 x Handle 105 x 39mm Metal Case 220mm, 110mm, 35mm
|
|
|
|
Felo-SMART hexagon sockets, metric
| #400 |
 |
Profi tool case by felo
Screwdriver - Original felo 2K technology and blade made from Chrome-Molybdenum-Vanadium steel with black-tip for precision fit.
Performance and highest precision.
|
|
|
|
Felo-SMART Mechanik profi toolset with T-handle 12-pcs.
| #401 |
 |
Profi tool case by felo
Screwdriver - Original felo 2K technology and blade made from Chrome-Molybdenum-Vanadium steel with black-tip for precision fit.
Pleasant soft-grip outer material for highest torque and anti-roll handle design. Performance and highest precision.
7 x Blade 1/4" x 160mm
PH1-7,0 / PH2-PH3 / PZ2-6,0
SW3-SW4 / SW5-SW6
Torx20-Torx25 / Torx30-Torx40
4 x Socket E6,3 x 155mm
SW7 / SW8 / SW10 / SW 13mm
1 x Handle 105 x 39mm Metal Case 220mm, 110mm, 35mm |
|
|
|
Felo-SMART profi toolset with T-screwdriver 13-pcs.
| #402 |
 |
Profi tool case by felo
Screwdriver - Original felo 2K technology and blade made from Chrome-Molybdenum-Vanadium steel with black-tip for precision fit.
Pleasant soft-grip outer material for highest torque and anti-roll handle design. Performance and highest precision.
8 x Blade 1/4" x 160mm
PH1-4,0 / PH2-PH3 / PZ1-5,0 / PZ2-6,0 / PZ3-7,0
SW3-SW4 / SW5-SW6 / Torx06-Torx07 / Torx08-Torx09
Torx10-Torx15 / Torx20-Torx25 / Torx30-Torx40 1 x Handle 105 x 39mm Metal Case 220mm, 110mm, 35mm |
|
|
|
Felo-SMART reversable blades
| #403 |
 |
Add-on blades for the profi tool case
1/4" 6,35mm
Screwdriver - Original felo 2K technology and blade made from Chrome-Molybdenum-Vanadium steel with black-tip for precision fit.
Performance and highest precision.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Felo-SMART several sockets, inch
| #432 |
|
|
Profi tool case by felo
Screwdriver - Original felo 2K technology and blade made from Chrome-Molybdenum-Vanadium steel with black-tip for precision fit.
Performance and highest precision.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Felo-SMART universal handle
| #441 |
 |
Universal Handle by felo
Screwdriver - Original felo 2K technology and blade made from Chrome-Molybdenum-Vanadium steel with black-tip for precision fit.
Pleasant soft-grip outer material for highest torque and anti-roll handle design. Performance and highest precision.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Flat blade TIN-Bits 1/4" 25mm
| #455 |
 |
Titanium Nitride coated Bits (CVD-technique) C6,3 Bits for sloted screws
DIN 3126 / ISO 1173
- high surface hardness (-90 HRc)
- increase in roughness
- good bonding of steel and coating
- long life
- reduced cam out forces
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Flat blade TIN-Bits 1/4" E6,3 73mm
| #461 |
 |
Titanium Nitride coated TiN Bits TIN-Plus (CVD-technique) C6,3 Bits for sloted screws
Surface hardness >90 HRC
Sloted screws, length: 73mm, DIN 3126 / ISO 1173
- high surface hardness (-90 HRc)
- increase in roughness
- good bonding of steel and coating
- long life
- reduced cam out forces
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Flat-blade classic bit 39mm
| #489 |
 |
Classic Bits 6,35 mm Form C3 , 1/4" Skt, DIN3126 / ISO1173 Longer Version 39mm
Universal bit for all kind of use.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Glasair 1860mm
| #505 |
 |
Tiefdecker Glasair SP 1860mm Technische Daten:
Spannweite: 1860 mm
Länge: ca. 1470 mm
Abfluggewicht: ca. 5200 g Motorisierung:
wahlweise Brushless Elektromotor, Desire Power 2x4200mAh-4S
15ccm 2-Takt
20 ccm 4 Takt
20ccm Benzinmotor
|
|
|
|
|
|
|
|
|
|
Hand Drills up to 10mm with breast plate
| #509 |
 |
Hand Drills up to 10mm with breast plate Hand Drills with fully enclosed gears, 2 speeds
Detachable crank and side handle. Quality tooling made by SCHRÖDER Germany |
|
|
|
|
|
Hawker Sea Fury Balsa 550mm
| #511 |
 |
Hawker Sea Fury Wing Span : / 550 mm
Requires : 3-4-channel (elevator and aileron), 10A brushless ESC and 2 cells 7,4V 450mAh battery |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Hexagon ballhead screwdriver Bondhus Prohold Tip
| #587 |
 |
NEW! Hexagon Ballhead screwdriver with Bondhus Prohold Tip
ProHold® Tip Screw Holding Technology Bondhus is the developer and exclusive manufacturer of patented ProHold® tip tools - the best screw holding technology available.
- Holds screws tight on the tool every time
- Available for both hex and star tools
- Bondhus is the only manufacturer making screw holding tools in sizes as small as .050" and 1.27mm
- Smooth tool rotation is preserved
- Does not reduce the strength of the tool or cause damage to the screw head
- Non-magnetic, usable for stainless steel screws
- Never drop a screw again
- Available in a full range of Hex and Star sizes: .050" to 3/8", 1.27mm to 10mm, and T9 to T60 The ProHold principle
|
|
|
|
Hexagon ballhead screwdriver Set Bondhus Prohold set 1,5-10mm
| #588 |
 |
NEW! Hexagon Ballhead screwdriver with Bondhus Prohold Tip
Set with 9 screwdriver and board
ProHold® Tip Screw Holding Technology Bondhus is the developer and exclusive manufacturer of patented ProHold® tip tools - the best screw holding technology available.
- Holds screws tight on the tool every time
- Available for both hex and star tools
- Bondhus is the only manufacturer making screw holding tools in sizes as small as .050" and 1.27mm
- Smooth tool rotation is preserved
- Does not reduce the strength of the tool or cause damage to the screw head
- Non-magnetic, usable for stainless steel screws
- Never drop a screw again
- Available in a full range of Hex and Star sizes: .050" to 3/8", 1.27mm to 10mm, and T9 to T60 |
|
|
|
Hexagon ballhead screwdriver Set Bondhus Prohold set 1,5-5mm
| #589 |
 |
NEW! Hexagon Ballhead screwdriver with Bondhus Prohold Tip
Set with 6 screwdriver 1,5 - 5mm and board
ProHold® Tip Screw Holding Technology Bondhus is the developer and exclusive manufacturer of patented ProHold® tip tools - the best screw holding technology available.
- Holds screws tight on the tool every time
- Available for both hex and star tools
- Bondhus is the only manufacturer making screw holding tools in sizes as small as .050" and 1.27mm
- Smooth tool rotation is preserved
- Does not reduce the strength of the tool or cause damage to the screw head
- Non-magnetic, usable for stainless steel screws
- Never drop a screw again
- Available in a full range of Hex and Star sizes: .050" to 3/8", 1.27mm to 10mm, and T9 to T60 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Hexagon Nut driver DIN 3125
| #603 |
 |
Nut driver screwdriver EXATORQ DIN 3125
Material selection and special heat treatment will garantee high durability Available in different sizes from:
SW= 4mm, lenght= 125mm up to
SW= 13mm lenght= 125mm
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Hexagon screwdriver Bits 1/4in, 25 mm
| #624 |
 |
Hexagon screwdriver bit 6,35 mm Form C3 , 1/4in driver, 25mm, DIN3126 / ISO1173 Expert Quality, 1/4" insert bits suitable for use in hand power or air tools, manufactured from SNCM-V steel hardened, machined and tempered to 59-60HRC. Machined to exacting tolerances exceeding DIN Specifications.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Hexagon-ball head screwdriver set 9pc. 1,5-10mm
| #671 |
 |
Hexagon-ball head screwdriver set 
Schlüsselsatz enthält: 1,5 / 2,0 / 2,5 / 3,0 / 4,0 / 5,0 / 6,0 / 8,0 / 10,0 |
|
|
|
Hexagonal ballhead 25 mm
| #672 |
 |
Classic Bits hexagonal ballhead 6,35 mm Form C3 , 1/4" Skt, 25mm, DIN3126 / ISO1173
Universal bit Hexagon ball head for all kind of use.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Hexagonal Nut Screwdriver Set
| #686 |
 |
High quality hexagonal screwdriver 6 piece set
6 x nut Driver (SW 4 / 6 / 8 / 10 / 12 / 13)
Well known EXATORQ screwdrivers now available as set in most common sizes Advantage:  of single piece price.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
High speed analog servo 9650
| #729 |
 |
Analog mini Servo dys9650 (mini)
High speed servo with 2 ball bearings Spec.:
- Speed: 0,08 sec/60Gr. (4,8V)
- Torque: 2kg/cm
- Weight: 26g
- Size: 35,5 x 15 x 28,6mm 
 |
|
|
|
High speed digital servo 9257
| #730 |
|
|
Digital Servo dys9257 High speed digital servo with 2 ball bearings Spec.:
- Speed: 0,08 sec/60Gr. (4,8V)
- Torque: 2kg/cm
- Weight: 26g
- Size: 35,5 x 15 x 28,6mm |
|
|
|
Hobby knife set HOBBYCUT Skalpell 16 pcs.
| #731 |
 |
Hobbymessersatz Hobbycut Skalpell 3 verschiedene Griffe mit 10 Erstazklingen.
Das Messerset mit 10 leicht auswechselbaren Skalpell-Klingen eignet sich hervorragend für Bastelarbeiten jeglicher Art. |
|
|
|
imax B5 50 Watt RC-charger / LiPo-Balancer 2-5S
| #732 |
 |
NEW! Original imax B5 inteligent Digital Balance Charger NiCd/NiMh/Lithium/PB Batteries The imax B5 is an entry level balancing charger which can handle up to 5 cells and 5A.
The B5 will handle LiPo up to 5S and NiMH/NiCd up to 14S and shows individual cell voltage during charge with realtime updates throughout the charge cycle.
Bundled with the B5 is a bunch of input and output wires which should satisfy any charging requirement.
The B5 can use indoor as well as outdoor. With the included 12V power connector cable it can easy connect to a car batterie.
Maximum security with integrated safety timer. The processor monitors the voltage of individual cells and try to normalise the voltage to be equal.
Optimized operating software charger with integrated safety timer. - LiPo/LiLo/: 1-5 cells 3,7-18.5V; 0,1-5A
- LiPo/LiLo/ in balancer mode: 1-5 cells 3,7-18.5V, 0,1-5A
- NiCd/NiMh: 1-14 cells 1,2-18V, 0,1-5A
- PB 2-12V
- charge up to 5 cycles
- Fast charging program for Lithium batteries
- PC based analysis using USB communication graph of voltage, current, capacity
- Data storage and load programm for your convenience.
- 16 chr + 2 lines LCD-screen
- Input power cable 11-18V DC
- Individual connection cable for most RC-usage
- Balancer connector: XH
 
With Logview 2.0 it is possible to connect the B5 to your computer. More information can find at www.logview.info
|
|
|
|
imax B6 50 Watt RC-digital charger / LiPo-Balancer 2-6S
| #733 |
 |
NEW! Original imax B6 inteligent Digital Balance Charger NiCd/NiMh/Lithium/PB Batteries The imax B6 is an entry level balancing charger and discharger which can handle up to 6 cells and 5A.
The B6 will handle LiPo/LiFe up to 6S and NiMH/NiCd up to 15S and shows individual cell voltage during charge with realtime updates throughout the charge cycle.
Bundled with the Charger is a bunch of input and output wires which should satisfy any charging requirement.
The integrated fan avoide overheating in fast charging mode. The B6 can use indoor as well as outdoor. With the included 12V power connector cable it can easy connect to a car batterie.
Maximum security with integrated safety timer. The processor monitors the voltage of individual cells and try to normalise the voltage to be equal.
Optimized operating software charger with integrated safety timer. - LiPo/LiLo/LiFe: 1-6 cells 3,7-22,4V; 0,1-5A
- LiPo/LiLo/LiFe in balancer mode: 1-6 cells 3,7-22,4V, 0,1-5A
- NiCd/NiMh: 1-15 cells 1,2-18V, 0,1-5A
- PB 2-20V
- charge/discharge up to 5 cycles
- Fast charging program for Lithium batteries
- PC based analysis using USB communication graph of voltage, current, capacity
- Data storage and load programm for your convenience.
- 16 chr + 2 lines LCD-screen
- Input power cable 11-18V DC
- Individual connection cable for most RC-usage
- Balancer connector: XH
 
Information to connect to your computer system can be find under www.logview.info
|
|
|
|
imax B6 50 Watt RC-digital multi charger with alubox
| #734 |
|
|
NEW! Original imax B6 inteligent Digital Balance Charger NiCd/NiMh/Lithium/PB Batteries The X-Charger B6 is an entry level balancing charger and discharger which can handle up to 6 cells and 5A.
The B6 will handle LiPo/LiFe up to 6S and NiMH/NiCd up to 15S and shows individual cell voltage during charge with realtime updates throughout the charge cycle.
Bundled with the X-Charger is a bunch of input and output wires which should satisfy any charging requirement.
The integrated fan avoide overheating in fast charging mode. The B6 can use indoor as well as outdoor. With the included 12V power connector cable it can easy connect to a car batterie.
Maximum security with integrated safety timer. The processor monitors the voltage of individual cells and try to normalise the voltage to be equal.
Optimized operating software charger with integrated safety timer. - LiPo/LiLo/LiFe: 1-6 cells 3,7-22,4V; 0,1-5A
- LiPo/LiLo/LiFe in balancer mode: 1-6 cells 3,7-22,4V, 0,1-5A
- NiCd/NiMh: 1-15 cells 1,2-18V, 0,1-5A
- PB 2-20V
- charge/discharge up to 5 cycles
- Fast charging program for Lithium batteries
- PC based analysis using USB communication graph of voltage, current, capacity
- Data storage and load programm for your convenience.
- 16 chr + 2 lines LCD-screen
- Input power cable 11-18V DC
- Individual connection cable for most RC-usage
- Balancer connector: XH
Information to connect
|
|
|
|
imax B6 AC 50 Watt RC-charger / LiPo balancer - 12V/220V
| #735 |
 |
NEW! Original imax B6 AC intelligent Digital Balance Charger
Input: 110-240V 50Hz (AC) 12-18V (DC)
NiCd/NiMh/Lithium/PB Batteries The X-Charger B6 is an entry level balancing charger and discharger which can handle up to 6 cells and 5A.
The B6 will handle LiPo/LiFe up to 6S and NiMH/NiCd up to 15S and shows individual cell voltage during charge with realtime updates throughout the charge cycle.
Bundled with the X-Charger is a bunch of input and output wires which should satisfy any charging requirement.
The integrated fan avoide overheating in fast charging mode. The B6 can use indoor as well as outdoor. With the included 12V power connector cable it can easy connect to a car batterie.
Maximum security with integrated safety timer. The processor monitors the voltage of individual cells and try to normalise the voltage to be equal.
Optimized operating software charger with integrated safety timer. - LiPo/LiLo/LiFe: 1-6 cells 3,7-22,4V; 0,1-5A
- LiPo/LiLo/LiFe in balancer mode: 1-6 cells 3,7-22,4V, 0,1-5A
- NiCd/NiMh: 1-15 cells 1,2-18V, 0,1-5A
- PB 2-20V
- charge/discharge up to 5 cycles
- Fast charging program for Lithium batteries
- PC based analysis using USB communication graph of voltage, current, capacity
- Data storage and load programm for your convenience.
- 16 chr + 2 lines LCD-screen
- Input power cable 11-18V DC and 110 - 240V (AC)
- Individual connection cable for most RC-usage
- Balancer connector: XH
 
|
|
|
|
imax B6 AC+ 50 Watt intelligent LiPo charger - 12V/220V
| #736 |
 |
NEW! Original imax B6 AC intelligent Digital Balance Charger
Input: 110-240V 50Hz (AC) 12-18V (DC)
NiCd/NiMh/Lithium/PB Batteries The X-Charger B6 is an entry level balancing charger and discharger which can handle up to 6 cells and 5A.
The B6 will handle LiPo/LiFe up to 6S and NiMH/NiCd up to 15S and shows individual cell voltage during charge with realtime updates throughout the charge cycle.
Bundled with the X-Charger is a bunch of input and output wires which should satisfy any charging requirement.
The integrated fan avoide overheating in fast charging mode. The B6 can use indoor as well as outdoor. With the included 12V power connector cable it can easy connect to a car batterie.
Maximum security with integrated safety timer. The processor monitors the voltage of individual cells and try to normalise the voltage to be equal.
Optimized operating software charger with integrated safety timer. - LiPo/LiLo/LiFe: 1-6 cells 3,7-22,4V; 0,1-5A
- LiPo/LiLo/LiFe in balancer mode: 1-6 cells 3,7-22,4V, 0,1-5A
- NiCd/NiMh: 1-15 cells 1,2-18V, 0,1-5A
- PB 2-20V
- charge/discharge up to 5 cycles
- Fast charging program for Lithium batteries
- PC based analysis using USB communication graph of voltage, current, capacity
- Data storage and load programm for your convenience.
- 16 chr + 2 lines LCD-screen
- Input power cable 11-18V DC and 110 - 240V (AC)
- Individual connection cable for most RC-usage
- Balancer connector: XH
|
|
|
|
imax B6 Pro 80 Watt RC-digital LiPo charger
| #737 |
 |
NEW! Original imax B6 Pro intelligent Digital Balance Charger with 80 watts power
NiCd/NiMh/Lithium/PB Batteries The imax B6 Pro is an profi level balancing charger and discharger which can handle up to 6 cells and 5A.
The B6 Pro will handle LiPo/LiFe up to 6S and NiMH/NiCd up to 15S and shows individual cell voltage during charge with realtime updates throughout the charge cycle.
Bundled with the Charger is a bunch of input and output wires which should satisfy any charging requirement.
The integrated fan avoide overheating in fast charging mode. The B6 Pro can use indoor as well as outdoor. With the included 12V power connector cable it can easy connect to a car batterie.
Maximum security with integrated safety timer. The processor monitors the voltage of individual cells and try to normalise the voltage to be equal.
Optimized operating software charger with integrated safety timer. - LiPo/LiLo/LiFe: 1-6 cells 3,7-22,4V; 0,1-5A
- LiPo/LiLo/LiFe in balancer mode: 1-6 cells 3,7-22,4V, 0,1-5A
- NiCd/NiMh: 1-15 cells 1,2-18V, 0,1-5A
- PB 2-20V
- charge/discharge up to 5 cycles
- Fast charging program for Lithium batteries
- PC based analysis using USB communication graph of voltage, current, capacity
- Data storage and load programm for your convenience.
- 16 chr + 2 lines LCD-screen
- Input power cable 11-18V DC
- Individual connection cable for most RC-usage
- Balancer connector: XH
Information to connect
|
|
|
|
imax B6 Ultimate 200Watt Charger Balancer 2-6S
| #738 |
 |
ENJOY! 200 Watt Charging Power, B6 Ultimate Digital Balance Charger NiCd/NiMh/Lithium/PB Batteries The imax B6 Ultimate 200Watt is an high grade balancing charger and discharger which can handle up to 6 cells and 10A.
The B6 Ultimate will handle LiPo/LiFe up to 6S and NiMH/NiCd up to 15S and shows individual cell voltage during charge with realtime updates throughout the charge cycle.
Bundled with the B6 Ultimate is a bunch of input and output wires which should satisfy any charging requirement.
The integrated fan avoide overheating in fast charging mode. The B6 Ultimate can use indoor as well as outdoor. With the included 12V power connector cable it can easy connect to a car batterie.
Maximum security with integrated safety timer. The processor monitors the voltage of individual cells and try to normalise the voltage to be equal.
Optimized operating software charger with integrated safety timer. - LiPo/LiLo/LiFe: 1-6 cells 3,7-22,4V; 0,1-10A
- LiPo/LiLo/LiFe in balancer mode: 1-6 cells 3,7-22,4V, 0,1-10A
- NiCd/NiMh: 1-15 cells 1,2-18V, 0,1-10A
- PB 2-20V
- charge/discharge up to 5 cycles
- Fast charging program for Lithium batteries
- PC based analysis using USB communication graph of voltage, current, capacity
- Data storage and load programm for your convenience.
- 16 chr + 2 lines LCD-screen
- Input power cable 11-18V DC
- Individual connection cable for most RC-usage
- Balancer connector: XH
|
|
|
|
imax B6 Ultimate 200Watt Charger Balancer 2-6S
| #739 |
 |
ENJOY! 400 Watt Charging Power, B6 Ultimate Digital Balance Charger NiCd/NiMh/Lithium/PB Batteries The imax B6 Ultimate 200Watt is an high grade balancing charger and discharger which can handle up to 6 cells and 10A.
The B6 Ultimate will handle LiPo/LiFe up to 6S and NiMH/NiCd up to 15S and shows individual cell voltage during charge with realtime updates throughout the charge cycle.
Bundled with the B6 Ultimate is a bunch of input and output wires which should satisfy any charging requirement.
The integrated fan avoide overheating in fast charging mode. The B6 Ultimate can use indoor as well as outdoor. With the included 12V power connector cable it can easy connect to a car batterie.
Maximum security with integrated safety timer. The processor monitors the voltage of individual cells and try to normalise the voltage to be equal.
Optimized operating software charger with integrated safety timer. - LiPo/LiLo/LiFe: 1-6 cells 3,7-22,4V; 0,1-20A
- LiPo/LiLo/LiFe in balancer mode: 1-6 cells 3,7-22,4V, 0,1-20A
- NiCd/NiMh: 1-15 cells 1,2-18V, 0,1-20A
- PB 2-20V
- charge/discharge up to 5 cycles
- Fast charging program for Lithium batteries
- PC based analysis using USB communication graph of voltage, current, capacity
- Data storage and load programm for your convenience.
- 16 chr + 2 lines LCD-screen
- Input power cable 11-18V DC
- Individual connection cable for most RC-usage
- Balancer connector: XH
|
|
|
|
imax B6+ 50 Watt RC-charger / LiPo-Balancer 2-6S
| #740 |
 |
NEW! imax B6 plus Digital Balance Charger NiCd/NiMh/Lithium/PB Batteries The imax B6+ is an high grade balancing charger and discharger which can handle up to 6 cells and 5A.
The B6+ will handle LiPo/LiFe up to 6S and NiMH/NiCd up to 15S and shows individual cell voltage during charge with realtime updates throughout the charge cycle.
Bundled with the B6+ is a bunch of input and output wires which should satisfy any charging requirement.
The integrated fan avoide overheating in fast charging mode. The B6+ can use indoor as well as outdoor. With the included 12V power connector cable it can easy connect to a car batterie.
Maximum security with integrated safety timer. The processor monitors the voltage of individual cells and try to normalise the voltage to be equal.
Optimized operating software charger with integrated safety timer. - LiPo/LiLo/LiFe: 1-6 cells 3,7-22,4V; 0,1-5A
- LiPo/LiLo/LiFe in balancer mode: 1-6 cells 3,7-22,4V, 0,1-5A
- NiCd/NiMh: 1-15 cells 1,2-18V, 0,1-5A
- PB 2-20V
- charge/discharge up to 5 cycles
- Fast charging program for Lithium batteries
- PC based analysis using USB communication graph of voltage, current, capacity
- Data storage and load programm for your convenience.
- 16 chr + 2 lines LCD-screen
- Input power cable 11-18V DC
- Individual connection cable for most RC-usage
- Balancer connector: XH
Information to connect
|
|
|
|
imax B8 200Watt intelligent RC-digital charger - LiPo-Balancer 2-8S
| #741 |
 |
NEW! Original imax B8 inteligent Digital Balance Charger NiCd/NiMh/Lithium/PB Batteries The X-Charger B8 is an entry level balancing charger and discharger which can handle up to 8 cells and 5A.
The B8 will handle LiPo/LiFe up to 8S and NiMH/NiCd up to 15S and shows individual cell voltage during charge with realtime updates throughout the charge cycle.
Bundled with the X-Charger is a bunch of input and output wires which should satisfy any charging requirement.
The integrated fan avoide overheating in fast charging mode. The B8 can use indoor as well as outdoor. With the included 12V power connector cable it can easy connect to a car batterie.
Maximum security with integrated safety timer. The processor monitors the voltage of individual cells and try to normalise the voltage to be equal.
Optimized operating software charger with integrated safety timer. - LiPo/LiLo/LiFe: 1-8 cells 3,7-29,6V; 0,1-5A
- LiPo/LiLo/LiFe in balancer mode: 1-8 cells 3,7-29,6V, 0,1-5A
- NiCd/NiMh: 1-15 cells 1,2-18V, 0,1-5A
- PB 2-20V
- charge/discharge up to 5 cycles
- Fast charging program for Lithium batteries
- PC based analysis using USB communication graph of voltage, current, capacity
- Data storage and load programm for your convenience.
- 16 chr + 2 lines LCD-screen
- Input power cable 11-18V DC
- Individual connection cable for most RC-usage
- Balancer connector: XH
 |
|
|
|
imax C3 Compact 30Watt LiPo charger - LiPo-Balancer 2-3S
| #742 |
 |
imax Compact C3 / LiPo Charger / Balancer
Features: - LiPo: 2-3 cells 7,4-11,1V; 0,1-0,65A
- Input power: 110 - 240V 50Hz (AC)
- Dimension: 100 x 60 x 35mm
- Weight: 180g
- Balancer connector: XH
LED-Indicator:
Power on: Orange (1 second)
Stand by: green
Charge: red
full: green
Fault: red-flashing
|
|
|
|
|
|
imax QUATTRO B6 complete Set
| #744 |
 |
NEW! imax QUATTRO B6 Digital Balance Charger
four individual charging devices build in
NiCd/NiMh/Lithium/PB Batteries The imax QUATTRO B6 is an high grade balancing charger and discharger which can handle up to 6 cells and 5A on 4 different independent chargers.
The QUATTRO B6 will handle LiPo/LiFe up to 6S and NiMH/NiCd up to 15S and shows individual cell voltage during charge with realtime updates throughout the charge cycle.
Bundled with the QUATTRO B6 is a bunch of input and output wires which should satisfy any charging requirement.
The integrated fans avoide overheating in fast charging mode. The QUATTRO B6 can use indoor as well as outdoor. With the included 12V power connector cable it can easy connect to a car batterie.
Maximum security with integrated safety timer. The processor monitors the voltage of individual cells and try to normalise the voltage to be equal.
Optimized operating software charger with integrated safety timer. - LiPo/LiLo/LiFe: 1-6 cells 3,7-22,4V; 0,1-5A
- LiPo/LiLo/LiFe in balancer mode: 1-6 cells 3,7-22,4V, 0,1-5A
- NiCd/NiMh: 1-15 cells 1,2-18V, 0,1-5A
- PB 2-20V
- charge/discharge up to 5 cycles
- Fast charging program for Lithium batteries
- Data storage and load programm for your convenience.
- 16 chr + 2 lines LCD-screen
- Input power cable 11-15V DC
- Individual connection cable for most RC-usage
- Balancer connector pannels : XH, FH
 Quattro B6 charger offers a complete charging solution for novice and expert RC enthusiasts alike. The multi-tasking versatility of this new charger makes it a perfect fit for nitro and electric modelers, regardless of what you drive, hover, float or fly.
Optimized operating software iMAX Quattro B6 features the so-called AUTO function that set the feeding current during the process of charging or discharging. Especially for Lithium batteries, it can prevent the overcharging which may lead to an explosion due to the user's fault. It can disconnect the circuit automatically and alarm once detecting any malfunction. All the programs of this product were controlled through two way linkage and communication, to achieve the maximum safety and minimize the trouble. All the settings can be configured by users! Internal independent lithium battery balancer iMAX Quattro B6 employs an individual-cell-voltage balancer. It isn't necessary to connect an external balancer for balance charging. Balancing individual cells battery discharging During the process of discharging, iMAX Quattro B6 can monitor and balance each cell of the battery individually. Error message will be indicated and the process will be ended automatically if the voltage of any single one cell is abnormal. Adaptable to various type of lithium battery IMAX Quattro B6 is adaptable to various types of Lithium batteries, such as Li-ion, LiPo and the new LiFe series of batteries.
Processing time limit: You can also limit the maximum process time to avoid any possible defect.
Data store/load The maximum five batteries' data can be stored for users' convenience. You can keep the data pertaining to program setting of the battery of continuous charging or discharging. Users can call out these data at any time without any special program setting. Cyclic charging/discharging 1 to 5 cyclic and continuous process of charge>discharge or discharge>charge is operable for battery refreshing and balancing to stimulate the battery's activity. Fast and storage mode of lithium battery Purposes to charge Lithium battery varies, 'fast' charge reduce the duration of charging, whereas 'store' state can control the final voltage of your battery, so as to store for a long time and protect useful time of the battery. Maximum safety Delta-peak sensitivity: The automatic charge termination program based on the principle of the Delta-peak voltage detection. When the battery's voltage exceeds the threshold, the process will be terminated automatically. Automatic charging current limit You can set up the upper limit of the charging current when charging your NiCd or NiMH battery; it is useful for the NiMH battery of low impedance and capacity in the 'AUTO' charging mode. Capacity limit The charging capacity is always calculated as the charging current multiplied by time. If the charging capacity exceeds the limit, the process will be terminated automatically when you set the maximum value. Temperature threshold* The battery's internal chemical reaction will cause the temperature of the battery to rise. If the temperature limit is reached, the process will be terminated. * This function is available by connecting optional temperature probe, which is not included in the package. PC based analysis uing USB Communication iMAX Quttro B6 offer PC based program can analysis the characteristic of the battery via USB port. It shows a graph of voltage, current, capacity curves. It also shows the individual voltage of each cell in the Lithium battery pack. PC-LINK USB adaptor can be purchased separately |
|
|
|
imax USB Software Kit
| #745 |
 |
Original imax USB softwarekit Contains of: - Charger Manager Version 1.1 for Windows
- USB connection line
- USB interface With this software kit by skyrc the imax digital chargers B5, B6, B6+ + B6 AC+ can be connected with your Personal Computer or any Laptop with USB interface. The software provide features for charge and discharge parameters of your LiPo-cells. A must for all who need to know more about there batteries.
Possible to use with identical charger models.
|
|
|
|
imax USB Software Kit B8
| #746 |
 |
Original imax USB softwarekit for B8 Contains of: - Charger Manager Version 1.1 for Windows
- USB connection line
The B8 has already mini-USB interface build in and can directly connect with your Personal Computer or any Laptop with USB interface. The software provide features for charge and discharge parameters of your LiPo-cells. A must for all who need to know more about there batteries.
Possible to use with identical charger models.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Jamara Heli Gyro 4-Channel with light
| #773 |
 |
Gyro
Helikopter Art.-Nr. 03 1630
Infrarot
Beim Gyro sind wir gleich mehrere Weg parallel gegangen. Wie der Name schon verrät hat dieser Winzling einen Kreisel spendiert bekommen. Noch nie war ein 3-Kanal Helikopter so präzise zu fliegen wie der Gyro. Das Heck rastet ein wie man das nur von großen Modellhubschraubern kennt. Das Chassis aus Aluminium macht den Hubschrauber sehr robust. Zusätzlich zum integrierten Ladegerät im Sender besteht die Möglichkeit, diesen Heli direkt am Computer per USB-Kabel zu laden. Der ideale Heli für Büro und Freizeit. 
Technische Besonderheit:
Eingebauter Kreisel für weitgehend automatische Fluglagestabilisierung. Lieferumfang: - Gyro Helikopter
- Fernsteuerung mit integriertem Ladekabel
- USB-Ladekabel
- LiPo Akku 3,7 V 210 mAh (bereits eingebaut)
- Ersatzrotorblätter
- Schraubenzieher
- Anleitung
Technische Daten:
Rotor Ø ca.175 mm
Länge ca. 190 mm
Höhe ca. 94 mm
Gewicht ca. 39,6 g (flugfertig)
Fernsteuerung 3 Kanal
Akku LiPo 3,7 V 210 mAh Empfohlenes Zubehör: - Transmitter
6 x AA-Batterien 1,5V or Akku 1,2V (necessary)
|
|
|
|
JST Female 150mm
| #774 |
 |
JST Female connector with 150mm lead - high grade silicon wire
- fireproof up to 200degrees
|
|
|
|
JST Male 150mm
| #775 |
 |
JST Mmale connector with 150mm lead - high grade silicon wire
- fireproof up to 200degrees
|
|
|
|
|
|
Katana T-30
| #777 |
 |
Katana T-30 Ein modernes Kunstflugmodell, mit dem Sie fast risikolos die verrücktesten Kunstflugmanöver trainieren können. Das Modell beherrscht sämtliche Kunstflugfiguren (inkl. 3D Flug) und nur der Pilot setzt hier das Limit. Es handelt sich hier um ein Fast-Fertigmodell aus dem leichten und besonders robusten EPP Schaum. Die Tragfläche ist voll profiliert. Das Modell ist werksseitig bereits fertig lackiert wie abgebildet. Die Flugeigenschaften sind von bestechender Präzision und Neutralität.
Lieferumfang:
* Fertigbauteile aus leichtem, robustem EPP Schaum
* Fertig gefräst und mehrfarbig lackiert
* Stabiles Hauptfahrwerk
* Zubehör für R/C Einbau
* Ausführliche, bebilderte Anleitung
| Technische Daten * | | Spannweite mm | 1200 | | Länge mm | 1230 | | Gewicht g | 770 | | R/C Funktionen | Seitenruder
Höhenruder
Querruder
Motorregler | Sonderzubehör
(empfohlen) | BOOST 25 Brushless Combo, # C2981
Mini Servo MASTER S2112 (x4), # C5185
LiPo Akku RED POWER 2200-11,1V, # C2158 |
* Technische Änderungen und Irrtümer vorbehalten |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
LiPo 7,4 V 2500mAh 14mm flat receiver
| #791 |
 |
LiPo receiver battery 7,4 V 2500mAh Dimensions: 17 x 30 x 96 mm
Weight: 100g Connection: Futaba Ultra light receiver battery.
Fit well small fuselage areas because of the slim design.
Recommend to use with U-BEC constant 5V 3A
|
|
|
|
LiPo 7,4 V 2500mAh B 11mm super flat
| #792 |
 |
LiPo receiver battery 7,4 V 2500mAh Dimensions: 11 x 45 x 110 mm
Weight: 100g Connection: Futaba Ultra light receiver battery.
Recommend to use with U-BEC constant 5V 3A
|
|
|
|
LiPo Akku 11,1V 360mAh 25C/50C V6 super power 3S1P
| #793 |
 |
LiPo 11.1v 360mAh (3S1P) 25C / 50C
Specs.
- Model Number: V6 360SP25-3S
- Capacity (mAh): 360
- Voltage: 11.1v
- Dimensions(+- .5mm)H - 11.8, W - 30.0, L - 54.0
- Approx Weight (g): 30.0
- Max Continuous Discharge 25C (11,2A)
- Max Burst Discharge 40C(22,5A)
- Current Cut-off 8.25V
- Balancer: XHR
Advantage: super slim design, high current battery newest generation |
|
|
|
LiPo Akku 11,1V 450mAh 25C/50C V6 super power 3S1P
| #794 |
|
|
LiPo 11.1v 450mAh (3S1P) 25C / 50C
Specs.
- Model Number: V6 450SP25-3S
- Capacity (mAh): 450
- Voltage: 11.1v
- Dimensions(+- .5mm)H - 13.0, W - 30.0, L - 54.0
- Approx Weight (g): 40.0
- Max Continuous Discharge 25C (11,2A)
- Max Burst Discharge 40C(22,5A)
- Current Cut-off 8.25V
- Balancer: XHR
Advantage: super slim design, high current battery newest generation |
|
|
|
LiPo Akku 11,1V 500mAh RFI 25C/50C V6 3S1P
| #795 |
 |
RFI LiPo 11.1v 500mAh (3S1P) 25C / 50C
Specs.
- Model Number: V6 450SP25-3S
- Capacity (mAh): 450
- Voltage: 11.1v
- Dimensions(+- .5mm)H - 13.0, W - 30.0, L - 54.0
- Approx Weight (g): 40.0
- Max Continuous Discharge 25C (11,2A)
- Max Burst Discharge 40C(22,5A)
- Current Cut-off 8.25V
- Balancer: XHR
Advantage: super slim design, high current battery newest generation |
|
|
|
LiPo Akku 11,1V 800mAh RFI 25C/50C 3S1P
| #796 |
 |
RFI LiPo 11.1v 1300mAh 3S1P 25C / 50C
Specs.
- Model Number: 1300SP25-3S
- Capacity (mAh): 1300
- Voltage: 11.1v
- Dimensions(+- .5mm)H - 23, W - 30, L - 52.0
- Approx Weight (g): 107
- Max Continuous Discharge 25C (32.0A)
- Max Burst Discharge 50C(65.0A)
- Current Cut-off 8.25V
- Balancer: XHR
Advantage: super slim design, high current battery newest generation |
|
|
|
LiPo Akku 11,1V 860mAh 30C/60C 3S1P
| #797 |
 |
Lithium Polymere battery by DesirePower.
11.1v 860mAh 3S1P 30C / 60C
Comes with e-flite type (JST-XHR balance connector and JST Power connector. Specs.
- Model Number: V6850SP30-3S
- Capacity (mAh): 860
- Voltage: 11.1v
- Dimensions(+- .5mm) H - 22; W - 30; L - 54.0
- Approx Weight (g): 72
- Max Continuous Discharge 30C (25,8A)
- Max Burst Discharge 60C(51,6A)
- Current Cut-off 8.25V
- Balancer: XHR
Reccomended for e-sky big Lama and perfect for Align T-Rex 250
|
|
|
|
LiPo Akku 11,1V 1300mAh 25C/50C V6 3S1P
| #798 |
 |
NEW! V6 super power series
LiPo 11.1v 1300mAh 3S1P 25C / 50C
Specs.
- Model Number: V61300SP25-3S
- Capacity (mAh): 1300
- Voltage: 11.1v
- Dimensions(+- .5mm)H - 18.0, W - 34.0, L - 73.0
- Approx Weight (g): 107
- Max Continuous Discharge 25C (32.0A)
- Max Burst Discharge 50C(65.0A)
- Current Cut-off 8.25V
- Balancer: XHR / EHR
Advantage: super slim design, high current battery newest generation |
|
|
|
LiPo Akku 11,1V 1800mAh 25C/50C V6 3S1P helituning
| #799 |
 |
NEW! V6 LiPo by DesirePower.
11.1v 1800mAh 3S1P 25C / 50C 2Ccharge
T-Type Power connector. Specs.
- Model Number: V6 1800SP25-3S1P
- Capacity (mAh): 1800
- Voltage: 11.1v
- Dimensions(+- .5mm)H - 20.0, W - 34.0, L - 104.0
- Approx Weight (g): 140.0
- Max Continuous Discharge 25C (45A)
- Max Burst Discharge 50C(90.0A)
- Current Cut-off 8.25V
- Balancer: XHR / EHR
super slim design, high current battery newest generation Helituning for e-flite Blade 400 3D. 
|
|
|
|
LiPo Akku 11,1V 1800mAh 25C/50C V6 3S1P helituning
| #800 |
|
|
NEW! V6 LiPo by DesirePower.
11.1v 1800mAh 3S1P 25C / 50C 2Ccharge
T-Type Power connector. Specs.
- Model Number: V6 1800SP25-3S1P
- Capacity (mAh): 1800
- Voltage: 11.1v
- Dimensions(+- .5mm)H - 20.0, W - 34.0, L - 104.0
- Approx Weight (g): 140.0
- Max Continuous Discharge 25C (45A)
- Max Burst Discharge 50C(90.0A)
- Current Cut-off 8.25V
- Balancer: XHR / EHR
super slim design, high current battery newest generation Helituning for e-flite Blade 400 3D.
|
|
|
|
LiPo Akku 11,1V 2200mAh 25C/50C V6 3S1P helituning
| #801 |
 |
NEW! V6 super power series
LiPo 11.1v 2200mAh 3S1P 25C / 50C
T-Type Power connector. Spec.
- Model Number: V62200SP25-3S
- Capacity (mAh): 2200
- Voltage: 11.1v
- Dimensions(+- .5mm)H - 26.0, W - 34.0, L - 104.0
- Approx Weight (g): 168.0
- Max Continuous Discharge 25C (55A)
- Max Burst Discharge 50C(110A)
- Current Cut-off 8.25V
- Balancer: XHR
Advantage: Desire Power introduce its new V6 super power series. Super slim design, high current battery newest generation with long cycle life.
|
|
|
|
LiPo Akku 11,1V 2200mAh 35C/70C V6 3S1P helituning
| #802 |
 |
NEW! V6 super power series
LiPo 11.1v 2200mAh 3S1P 35C / 70C
T-Type Power connector. Spec.
- Model Number: V62200SP35-3S
- Capacity (mAh): 2200
- Voltage: 11.1v
- Dimensions(+- .5mm)H - 26.0, W - 34.0, L - 104.0
- Approx Weight (g): 197.0
- Max Continuous Discharge 35C (77A)
- Max Burst Discharge 70C(154A)
- Current Cut-off 8.25V
- Balancer: XHR
Advantage: Desire Power introduce its new V6 extreme power series. Super slim design, high current battery newest generation with long cycle life.
|
|
|
|
LiPo Akku 11,1V 2500mAh 25C/50C V6 3S1P helituning
| #803 |
 |
NEW! V6 super power series
LiPo 11.1v 2200mAh 3S1P 25C / 50C Dean T-Type Power connector.
Spec.
* Model Number: V62200SP25-3S
* Capacity (mAh): 2200
* Voltage: 11.1v
* Dimensions(+- .5mm)H - 26.0, W - 34.0, L - 104.0
* Approx Weight (g): 174.0
* Max Continuous Discharge 25C (55A)
* Max Burst Discharge 50C(110A)
* Current Cut-off 8.25V
* Balancer: XHR
Advantage: Desire Power introduce its new V6 super power series. Super slim design, high current battery newest generation with long cycle life. |
|
|
|
LiPo Akku 11,1V 2600mAh 25C/50C V6 3S1P
| #804 |
 |
NEW! V6 super power series
LiPo 11.1v 2600mAh 3S1P 25C / 50C T-Type Power connector. Specs.
- Model Number: V6 2600SP25-3S1P - super power series
- Capacity (mAh): 2600
- Voltage: 11.1v
- Dimensions(+- .5mm)H - 17.0, W - 45.0, L - 136.0
- Approx Weight (g): 190.0
- Max Continuous Discharge 25C (45A)
- Max Burst Discharge 50C(90.0A)
- Current Cut-off 8.25V
- Balancer: XHR / EHR
Advantage:
NEW! V6 super power series. super slim design, high current battery newest generation |
|
|
|
LiPo Akku 11,1V 2600mAh 35C/70C V8 3S1P
| #805 |
 |
NEW! V8 LiPo by DesirePower.
11.1v 2600mAh 3S1P 35C/70C
XHR Balancer, Dean T-Type Power connector. Specs.
Technische Daten:
- Modell: V8 2600SP35-3S1P
- Kapazität (mAh): 2600
- Spannung: 11,1 V
- Abmessungen(+- .5mm): H - 16,4 B - 44.0, L - 134,0
- Gewicht ca. (g): 209
- Max Entladestrom: 35C (91A)
- Max kurzzeitig: 70C(182A)
- Entladeschlußspannung: 8.25V
- Balancer: XHR
|
|
|
|
LiPo Akku 11,1V 4200mAh 60C/120C V8 3S1P
| #806 |
 |
NEW! V8 LiPo by DesirePower.
11.1v 4200mAh 3S1P 60C/120C
XHR Balancer, Dean T-Type Power connector. Specs.
- Modell: V8 4200XP60-3S1P
- Kapazität (mAh): 4200
- Spannung: 11,1 V
- Abmessungen(+- .5mm): H - 24 B - 44.0, L - 134,0
- Gewicht ca. (g): 315
- Max Entladestrom: 60C (252A)
- Max kurzzeitig: 120C(504A)
- Entladeschlußspannung: 8.25V
- Balancer: XHR
|
|
|
|
LiPo Akku 11,1V 5100mAh 60C/120C V8 3S1P
| #807 |
 |
NEW! V8 LiPo by DesirePower.
11.1v 4200mAh 3S1P 60C/120C
XHR Balancer, Dean T-Type Power connector. Specs. - Model: V8 5100XP60-3S1P
- Capacity: (mAh): 5100
- Voltage: 11,1 V
- Dimension:(+- .5mm): H - 32 B - 44.0, L - 155,0
- Weight ca. (g): 423
- Max current parmanent: 60C (306A)
- Max current short: 120C(612A)
- shut off low voltage: 8.25V
- Balancer: XHR (Align, e-max, e-flite)
|
|
|
|
LiPo Akku 11,1V 3300mAh 30C/55C 3S1P
| #808 |
 |
LiPo 11.1v 3300mAh 3S 30C/55C - 2C charge
Comes with e-flite type JST-XHR or EH charge balance connector and T-Type Power connector. - Model Number: DP3300XP30-3S
- Capacity (mAh): 3300
- Voltage: 11.1v
- Dimensions(+- .5mm)H - 22.0, W - 43.0, L - 155
- Approx Weight (g): 238.0
- Continuous Discharge max: 30C (>90A)
- Max Burst Discharge 40C(>100A)
- Current Cut-off 8.25V
- Charge (suggestion): max 3300mA with charge balancer
Advantage: super slim design, high current battery newest generation
|
|
|
|
|
|
LiPo Akku 7,4V 500mAh RcPower 25C/35C 2S1P
| #810 |
 |
2S LiPo 7.4v 500mAh RcPower 2S1P 25C/35C
Specs.
- Model Number: 500SP25-2S
- Capacity (mAh): 500
- Voltage: 7,4v
- Dimensions(+- .5mm)H - 10, W - 30, L - 55.0
- Approx Weight (g): 30
- Max Continuous Discharge 25C (12.5A)
- Max Burst Discharge 35C(17.5A)
- Balancer: XHR
RcPower LiPo-battery newest generation.
|
|
|
|
LiPo Akku 7,4V 500mAh RFI 25C/50C 3S1P
| #811 |
 |
RFI LiPo 7.4v 500mAh 2S1P 25C / 50C
Specs.
- Model Number: 500SP25-2S
- Capacity (mAh): 500
- Voltage: 7,4v
- Dimensions(+- .5mm)H - 10, W - 30, L - 55.0
- Approx Weight (g): 30
- Max Continuous Discharge 25C (32.0A)
- Max Burst Discharge 50C(65.0A)
- Balancer: XHR
Advantage: super slim design, high current battery newest generation |
|
|
|
LiPo Akku 7,4V 800mAh RFI 25C/50C 2S1P
| #812 |
 |
RFI LiPo 7.4v 800mAh 2S1P 25C / 50C
Specs.
- Model Number: 800SP25-2S
- Capacity (mAh): 800
- Voltage: 7,4v
- Dimensions(+- .5mm)H - 15, W - 30, L - 55.0
- Approx Weight (g): 36
- Max Continuous Discharge 25C (32.0A)
- Max Burst Discharge 50C(65.0A)
- Balancer: XHR
Advantage: super slim design, high current battery newest generation |
|
|
|
LiPo Akku 7,4V 4200mAh 60C/120C V8 3S1P
| #813 |
|
|
NEW! V8 LiPo by DesirePower.
11.1v 4200mAh 3S1P 60C/120C
XHR Balancer, Dean T-Type Power connector. Specs. - Model: V8 4200XP60-2S1P
- Capacity(mAh): 4200
- Voltage: 7,4 V
- Dimension(+- .5mm): H - 16,5 B - 44.0, L - 134,0
- Weight ca. (g): 217
- Max permanent current: 60C (252A)
- Max short current: 120C(504A)
- Shut of voltage: 5.3V
- Balancer: XHR
|
|
|
|
LiPo Akku 7,4V 4800mAh 60C V8 hardcase
| #814 |
 |
NEW! V8 LiPo by DesirePower.
11.1v 4200mAh 3S1P 60C/120C
XHR Balancer, Dean T-Type Power connector. Specs. - Model: V8 4800XP60-2S1P
- Capacity(mAh): 4800
- Voltage: 7,4 V
- Dimension(+- .5mm): H - 16,5 B - 44.0, L - 134,0
- Weight ca. (g): 217
- Max permanent current: 60C (252A)
- Max short current: 120C(504A)
- Shut of voltage: 5.3V
- Balancer: XHR
Hard-Case LiPo for maximum performance for RC-Racing Cars.
|
|
|
|
LiPo Balancer Adaptor EH-Akku to XH-socket 2S
| #815 |
 |
NEW! LiPo Balancer Adaptor - 2S
EHR-plug to XHR-socket With this adaptor cable you can charge the widely spread LiPo's with EHR-Balancer on our imax Chargers with XHR connector. With this balancer adaptor you have the highest flexibility to use your favorite Charger.
The adaptor cable is also a welcome extension line for the sometimes to short balancer cables on most LiPo cells. * flexible silicon wire
* length ~100mm |
|
|
|
LiPo Balancer Adaptor EH-Akku to XH-socket 3S
| #816 |
|
|
NEW! LiPo Balancer Adaptor - 3S
EHR-plug to XHR-socket With this adaptor cable you can charge the widely spread LiPo's with EHR-Balancer on our imax Chargers with XHR connector. With this balancer adaptor you have the highest flexibility to use your favorite Charger.
The adaptor cable is also a welcome extension line for the sometimes to short balancer cables on most LiPo cells. * flexible silicon wire
* length ~100mm |
|
|
|
LiPo Balancer Adaptor EH-Akku to XH-socket 4S
| #817 |
|
|
NEW! LiPo Balancer Adaptor - 4S
EHR-plug to XHR-socket With this adaptor cable you can charge the widely spread LiPo's with EHR-Balancer on our imax Chargers with XHR connector. With this balancer adaptor you have the highest flexibility to use your favorite Charger.
The adaptor cable is also a welcome extension line for the sometimes to short balancer cables on most LiPo cells. * flexible silicon wire
* length ~100mm |
|
|
|
LiPo Balancer Adaptor EH-Akku to XH-socket 5S
| #818 |
|
|
NEW! LiPo Balancer Adaptor - 5S
EHR-plug to XHR-socket With this adaptor cable you can charge the widely spread LiPo's with EHR-Balancer on our imax Chargers with XHR connector. With this balancer adaptor you have the highest flexibility to use your favorite Charger.
The adaptor cable is also a welcome extension line for the sometimes to short balancer cables on most LiPo cells. * flexible silicon wire
* length ~100mm |
|
|
|
LiPo Balancer Adaptor EH-Akku to XH-socket 6S
| #819 |
|
|
NEW! LiPo Balancer Adaptor - 6S
EHR-plug to XHR-socket With this adaptor cable you can charge the widely spread LiPo's with EHR-Balancer on our imax Chargers with XHR connector. With this balancer adaptor you have the highest flexibility to use your favorite Charger.
The adaptor cable is also a welcome extension line for the sometimes to short balancer cables on most LiPo cells. * flexible silicon wire
* length ~100mm |
|
|
|
LiPo Balancer Adaptor XH-akku to EH-socket 5S
| #820 |
 |
NEW! LiPo Balancer Adapterkabel - 5S
XHR-plug to EHR-socket With this adaptor cable you can charge the widely spread LiPo's with XHR-Balancer on the robbe/Graupner chargers with EHR connector also. With this balancer adaptor you have the highest flexibility to use your favorite charger.
The adaptor cable is also a welcome extension line for the sometimes to short balancer cables on most LiPo cells. * flexible silicon wire
* length ~100mm We looking forward to receive your mail with recommendations about the different balancer connection systems for R/C LiPo's.
|
|
|
|
LiPo Balancer Adaptor XH-akku to EH-socket 6S
| #821 |
|
|
NEW! LiPo Balancer Adapterkabel - 6S
XHR-plug to EHR-socket With this adaptor cable you can charge the widely spread LiPo's with XHR-Balancer on the robbe/Graupner chargers with EHR connector also. With this balancer adaptor you have the highest flexibility to use your favorite charger.
The adaptor cable is also a welcome extension line for the sometimes to short balancer cables on most LiPo cells. * flexible silicon wire
* length ~100mm We looking forward to receive your mail with recommendations about the different balancer connection systems for R/C LiPo's.
|
|
|
|
LiPo Balancer Adaptor XH-akku to EHR-socket 4S
| #822 |
|
|
NEW! LiPo Balancer Adapterkabel - 4S
XHR-plug to EHR-socket With this adaptor cable you can charge the widely spread LiPo's with XHR-Balancer on the robbe/Graupner chargers with EHR connector also. With this balancer adaptor you have the highest flexibility to use your favorite charger.
The adaptor cable is also a welcome extension line for the sometimes to short balancer cables on most LiPo cells. * flexible silicon wire
* length ~100mm We looking forward to receive your mail with recommendations about the different balancer connection systems for R/C LiPo's.
|
|
|
|
LiPo battery 11,1V 1800mAh 35C/70C V8 2S1P
| #823 |
 |
NEW! V8 Series by DesirePower
LiPo 11,1V 1800mAh (2S1P) 35 / 70C
Spec. - Model Number: 1800XP35-3S
- Capacity (mAh): 1800
- Voltage: 11,1V
- Dimensions(+- .5mm)H - 19,8 W - 34.0, L - 103.0
- Approx Weight (g): 143
- Max Continuous Discharge 35C (63A)
- Max Burst Discharge 70C (126A)
- Current Cut-off 5,5V
Advantage: super slim design, high current battery, newest generation |
|
|
|
LiPo battery 11,1V 2250mAh 35C/70C V8 2S1P
| #824 |
 |
NEW! V8 Series by DesirePower
LiPo 11,1V 2250mAh (2S1P) 35 / 70C
Spec. - Model Number: 2250XP35-3S
- Capacity (mAh): 2250
- Voltage: 11,1V
- Dimensions(+- .5mm)H - 24.0, W - 34.0, L - 103.0
- Approx Weight (g): 176
- Max Continuous Discharge 35C (78A)
- Max Burst Discharge 70C (157A)
- Current Cut-off 5,5V
Advantage: super slim design, high current battery, newest generation |
|
|
|
LiPo battery 11,1V 4200mAh 35C/70C V8 3S1P
| #825 |
 |
NEW! V8 Series by DesirePower
LiPo 11,1V 4200mAh (3S1P) 35 / 70C
Spec. - Model Number: 4200XP35-3S
- Capacity (mAh): 4200
- Voltage: 11,1V
- Dimensions(+- .5mm)H - 25.0, W - 44.0, L - 134.0
- Approx Weight (g): 315
- Max Continuous Discharge 35C (147A)
- Max Burst Discharge 70C (294A)
- Current Cut-off 5,5V
Advantage: super slim design, high current battery, newest generation |
|
|
|
LiPo battery 11,1V 4200mAh 45C/70C V8 3S1P
| #826 |
 |
NEW! V8 Series by DesirePower
LiPo 11,1V 4200mAh (3S1P) 35 / 70C
Spec. - Model Number: 4200XP45-3S1P
- Capacity (mAh): 4200
- Voltage: 11,1V
- Dimensions(+- .5mm)H - 23.5 W - 44.0, L - 134.0
- Approx Weight (g): 299
- Max Continuous Discharge 45C (189A)
- Max Burst Discharge 90C (378A)
- Current Cut-off 5,5V
Advantage: super slim design, high current battery, newest generation |
|
|
|
LiPo battery 11,1V 3700mAh 25C/50C V6 3S1P
| #827 |
 |
NEW! V6 supr power Series.
11.1v 3700mAh (3 cells) 25C / 50C / 2C charge
Comes with Graupner/JR EH charge balance connector and T-Type Power connector. Specs.
- Model Number: V6 3700SP25-3S
- Capacity (mAh): 3700
- Voltage: 11.1v
- Dimensions(+- .5mm)H - 23.5 W - 43.0, L - 136
- Approx Weight (g): 265.0
- Continuous Discharge max: 25C (92.5A)
- Max Burst Discharge 50C(185A)
- Current Cut-off 8.25V
- Charge (suggestion): max 3700mA with charge balancer
New: V6 series for better performance and longer cycle life. Super slim design
Currently the best RC-battery in the market for most RC-applications. Order here our recommended Multi-charger with balancer
|
|
|
|
LiPo battery 14,8V 1800mAh 25C/50C V6 4S1P
| #828 |
 |
NEW! V6 high performance Series.
LiPo 14.8v 1800mAh 4S1P 25C / 50C / 2C charge
Comes with Graupner/JR EHR charge balance connector and T-Type Power connector.
Specs.
- Model Number: V6 1800SP25-4S
- Capacity (mAh): 1800
- Voltage: 14.8v
- Dimensions(+- .5mm)H - 25 W - 35.0, L - 116
- Approx Weight (g): 200.0
- Continuous Discharge max: 25C (>45A)
- Max Burst Discharge 50C(>90A)
- Current Cut-off 11V
- Charge (suggestion): max 1800mA with charge balancer
New: V6 series for better performance and longer cycle life. Super slim design Currently the best RC-battery in the market for most RC-applications.
Recommended Multi-charger with balancer
|
|
|
|
LiPo battery 18.5V 2600mAh 25C/50C V6 5S1P
| #829 |
 |
NEW! V6 supr power Series.
LiPo 18.5v 2600mAh 5S1P 25C / 50C / 2C charge
Comes with Graupner/JR EH charge balance connector and T-Type Power connector. Specs.
- Model Number: V6 2600SP25-5S
- Capacity (mAh): 2600
- Voltage: 18.5v
- Dimensions(+- .5mm)H - 29 W - 45.0, L - 136
- Approx Weight (g): 314
- Continuous Discharge max: 25C (65A)
- Max Burst Discharge 50C(130A)
- Current Cut-off 13,75V
- Balancer: XHR
New: V6 series for better performance and longer cycle life. Super slim design
Currently the best RC-battery in the market for most RC-applications. Order here our recommended Multi-charger with balancer
|
|
|
|
LiPo battery 18.5V 3300mAh 25C/50C V6 5S1P
| #830 |
 |
NEW! V6 supr power Series.
18.5v 3300mAh 5S1P 25C / 50C / 2C charge
Comes with Graupner/JR EH charge balance connector and T-Type Power connector. Specs.
- Model Number: V6 3300SP25-5S
- Capacity (mAh): 3300
- Voltage: 18,5v
- Dimensions(+- .5mm) H - 34; W - 43.0; L - 136
- Approx Weight (g): 390.0
- Continuous Discharge max: 25C (82,5A)
- Max Burst Discharge 50C(165A)
- Balancer: EH
New: V6 series for better performance and longer cycle life. Super slim design
Currently the best RC-battery in the market for most RC-applications. Order here our recommended Multi-charger with balancer
|
|
|
|
LiPo battery 22,2V 2200mAh 25C/50C V6 6S1P
| #831 |
 |
NEW! V6 high performance Series.
22,2 V 2200mAh (6 cells) 25C / 50C / 2C charge
Comes with Graupner/JR EHR charge balance connector and T-Type Power connector. Specs.
- Model Number: V62200SP25-6S
- Capacity (mAh): 2200
- Voltage: 22.2v
- Dimensions(+- .5mm)H - 53 W - 34.0, L - 104
- Approx Weight (g): 332.0
- Continuous Discharge max: 25C (55A)
- Max Burst Discharge 50C(110A)
New: V6 series for better performance and longer cycle life. Super slim design Currently the best RC-battery on the market. |
|
|
|
LiPo battery 22,2V 2600mAh 25C/50C V6 6S1P
| #832 |
 |
NEW! V6 high performance Series.
22,2 V 2600mAh 6S1P - 25C / 50C / 2C charge
T-Type Power connector. Specs.
- Model Number: V6 2600SP25-6S1P
- Capacity (mAh): 2600
- Voltage: 22.2v
- Dimensions(+- .5mm)H - 35 W - 45.0, L - 136
- Approx Weight (g): 525.0
- Continuous Discharge max: 25C (65A)
- Max Burst Discharge 50C(130A)
- Current Cut-off 16.5V
- Charge (suggestion): max 2600mA
- Balancer: EH
New: V6 series for better performance and longer cycle life. Super slim design In medium price segment the currently best RC-battery in the market, power battery and helituning
Application with 12-15min flight time!!
Gaui Hurricane 550 with Desire Power V6 22.2v 2600mAh 6S1P
 |
|
|
|
LiPo battery 22,2V 3700mAh 25C/50C V6 6S1P
| #833 |
 |
NEW! V6 high performance Series.
22,2 V 3700mAh 6S1P 25C / 50C / 2C
Dean T-Type Power connector. Specs.
- Model Number: V63700SP25-6S
- Capacity (mAh): 3700
- Voltage: 22.2v
- Dimensions(+- .5mm)H - 47.5, W - 43.0, L - 136
- Approx Weight (g): 525.0
- Continuous Discharge max: 25C (92.5A)
- Max Burst Discharge 50C(185A)
- Balancer: EH
V6 series for better performance and longer cycle life. Super slim design Currently the best RC-battery in the market. Recommended Multi-charger with balancer
|
|
|
|
LiPo battery 7,4V 350mAh 25C/40C 2S1P red power
| #834 |
 |
LiPo 7,4V 350mAh (2 cells) 25C / 40C
Spec.
* Model Number: 350SP25-2S
* Capacity (mAh): 350
* Voltage: 7,4V
* Dimensions(+- .5mm)H - 14 W - 20 L - 40
* Approx Weight (g): 21
* Max Continuous Discharge 25C (11.25A)
*
|
|
|
|
LiPo battery 7,4V 360mAh 25C/50C 2S1P
| #835 |
 |
NEW! V6 super power series by DesirePower
LiPo 7,4V 360mAh (2 cells) 25C / 50C
Desire Power presents it's new LiPo V6 Super Power Series.
Comes with e-flite type (JST-XHR) charge balance connector and BEC-Power connector.
Spec.
* Model Number: V6 360SP25-2S
* Capacity (mAh): 360
* Voltage: 7,4V
* Dimensions(+- .5mm)H - 7 W - 30.0, L - 54.0
* Approx Weight (g): 28
* Max Continuous Discharge 25C (11.25A)
* Max Burst Discharge 50C(22.5A)
* Current Cut-off 5,5V
Advantage: V6 super power is currently one of the best lipo battery in the market. super slim design, high current battery, newest generation.
Recommended Charger: Multi-Charger mit Balancer |
|
|
|
LiPo battery 7,4V 450mAh 25C/50C 2S1P
| #836 |
 |
NEW! V6 super power series by DesirePower
7,4V 450mAh (2 cells) 25C / 50C
Desire Power präsents it's new LiPo V6 Super Power Series.
Comes with e-flite type (JST-XHR) charge balance connector and BEC-Power connector. Specs.
- Model Number: V6 450SP25-2S
- Capacity (mAh): 450
- Voltage: 7,4V
- Dimensions(+- .5mm)H - 8.5, W - 30.0, L - 56.0
- Approx Weight (g): 28
- Max Continuous Discharge 25C (11.25A)
- Max Burst Discharge 50C(22.5A)
- Current Cut-off 5,5V
- Charge (suggestion): max 450mA
Advantage: V6 super power is currently one of the best lipo battery in the market. super slim design, high current battery, newest generation Recommended Charger: Multi-Charger mit Balancer
|
|
|
|
LiPo battery 7,4V 800mAh 20C/40C 2S1P
| #837 |
 |
Lithium-Polymere battery made by DesirePower.
7,4V 800mAh (2S1P).
Comes with e-flite type (JST-XHR) charge balance connector and Power connector.
Specs.
- Model Number: DP800SP20-2S1P
- Capacity (mAh): 800
- Voltage: 7,4V
- Dimensions(+- .5mm)H - 12.0, W - 25.0, L - 72.0
- Approx Weight (g): 60
- Max Continuous Discharge 20C (16A)
- Max Burst Discharge 40C(36A)
- Current Cut-off 5,5V
Advantage: super slim design, high current battery, newest generation
|
|
|
|
LiPo battery 7,4V 850mAh 25C/50C 2S1P
| #838 |
 |
NEU! V6 Serie
LiPo 7,4V 850mAh, (2S1P) 25C / 50C Desire Power präsents it's new LiPo V6 Super Power Series.
Comes with e-flite type (JST-XHR) charge balance connector and BEC-Power connector. Specs.
- Model Number: V6 850SP25-2S
- Capacity (mAh): 850
- Voltage: 7,4V
- Dimensions(+- .5mm)H - 15.0, W - 30.0, L - 56.0
- Approx Weight (g): 28
- Max Continuous Discharge 25C (21,25A)
- Max Burst Discharge 50C(42,5A)
- Current Cut-off 5,5V
Advantage: V6 super power is currently one of the best lipo battery in the market. super slim design, high current battery, newest generation |
|
|
|
LiPo battery 7,4V 860mAh 35C/70C V8 2S1P
| #839 |
 |
NEW! V8 Series by DesirePower
LiPo 7,4V 860mAh (2S1P) 35 / 70C
Spec. - Model Number: 860XP35-2S
- Capacity (mAh): 860
- Voltage: 7,4V
- Dimensions(+- .5mm)H - 16, W - 30.0, L - 53.0
- Approx Weight (g): 47
- Max Continuous Discharge 35C (30A)
- Max Burst Discharge 70C (60A)
- Current Cut-off 5,5V
Advantage: super slim design, high current battery, newest generation |
|
|
|
LiPo battery 7,4V 1300mAh 25C/50C V6 2S1P
| #840 |
 |
NEW! V6 super power series by DesirePower
7,4V 1300mAh (2 cells) 25C / 50C
Comes with e-flite type (JST-XHR) charge balance connector and JST-Power connector. Specs.
- Model Number: V61300SP25-2S
- Capacity (mAh): 1300
- Voltage: 7,4V
- Dimensions(+- .5mm)H - 12.0, W - 34.0, L - 73.0
- Approx Weight (g): 73
- Max Continuous Discharge 25C (32,5A)
- Max Burst Discharge 50C(65A)
- Current Cut-off 5,5V
Advantage: V6 super power is currently one of the best lipo battery in the market. super slim design, high current battery, newest generation Recommended Charger: Multi-Charger mit Balancer
|
|
|
|
LiPo battery 7,4V 1800mAh 25C/50C V6 2S1P
| #841 |
 |
NEW! V6 super power series by DesirePower
7,4V 1800mAh (2 cells) 25C / 50C
Comes with e-flite type (JST-XHR) charge balance connector and Power connector. Specs.
- Model Number: V61800SP25-2S1P
- Capacity (mAh): 1800
- Voltage: 7,4V
- Dimensions(+- .5mm)H - 13.0, W - 34.0, L - 104.0
- Approx Weight (g): 95
- Max Continuous Discharge 25C (45A)
- Max Burst Discharge 50C(90A)
- Current Cut-off 5,5V
- Charge (suggestion): max 1800mA
Advantage: V6 super power is currently one of the best lipo battery in the market. super slim design, high current battery, newest generation Recommended Charger: Multi-Charger mit Balancer
|
|
|
|
LiPo battery 7,4V 1800mAh 35C/70C V8 2S1P
| #842 |
 |
NEW! V8 Series by DesirePower
LiPo 7,4V 1800mAh (2S1P) 35 / 70C
Spec. - Model Number: 1800XP35-2S
- Capacity (mAh): 1800
- Voltage: 7,4V
- Dimensions(+- .5mm)H - 13,5, W - 34.0, L - 103.0
- Approx Weight (g): 99
- Max Continuous Discharge 35C (63A)
- Max Burst Discharge 70C (126A)
- Current Cut-off 5,5V
Advantage: super slim design, high current battery, newest generation |
|
|
|
LiPo battery 7,4V 2200mAh 25C/50C V6 2S1P
| #843 |
 |
NEU! V6 LiPo 7,4V 2200mAh, (2cell) 25C / 50C / 2C
Comes with e-flite type (JST-XHR) charge balance connector and T-Power connector. Specs.
- Model Number: V6 2200SP25-2S
- Capacity (mAh): 2200
- Voltage: 7,4V
- Dimensions(+- .5mm)H - 17.0, W - 34.0, L - 104.0
- Approx Weight (g): 114
- Max Continuous Discharge 25C (55A)
- Max Burst Discharge 50C(110A)
- Current Cut-off 5,5V
- Charge (suggestion): max 2200mA
Advantage: V6 super power is currently one of the best lipo battery in the market. super slim design, high current battery, newest generation Recommended Charger: Multi-Charger mit Balancer
|
|
|
|
LiPo battery 7,4V 2200mAh 25C/70C V6 2S1P
| #844 |
|
|
NEU! V6
LiPo 7,4V 2200mAh, (2S1P) 25C / 50C / 2C
Comes with e-flite type (JST-XHR) charge balance connector and T-Power connector. Specs.
- Model Number: V6 2200SP25-2S
- Capacity (mAh): 2200
- Voltage: 7,4V
- Dimensions(+- .5mm)H - 17.0, W - 34.0, L - 104.0
- Approx Weight (g): 114
- Max Continuous Discharge 25C (55A)
- Max Burst Discharge 50C(110A)
- Current Cut-off 5,5V
- Charge (suggestion): max 2200mA
Advantage: V6 super power is currently one of the best lipo battery in the market. super slim design, high current battery, newest generation |
|
|
|
LiPo battery 7,4V 2250mAh 35C/70C V8 2S1P
| #845 |
 |
NEW! V8 Series by DesirePower
LiPo 7,4V 2250mAh (2S1P) 35 / 70C
Spec. - Model Number: 2250XP35-2S
- Capacity (mAh): 2250
- Voltage: 7,4V
- Dimensions(+- .5mm)H - 16.0, W - 34.0, L - 103.0
- Approx Weight (g): 118
- Max Continuous Discharge 35C (78A)
- Max Burst Discharge 70C (157A)
- Current Cut-off 5,5V
Advantage: super slim design, high current battery, newest generation |
|
|
|
LiPo battery 7,4V 2600mAh 25C/50C V6 2S1P
| #846 |
 |
NEW! V6 super power serie
LiPo 7,4V 2600mAh (2S1P) 25 / 50C
Spec. - Model Number: V62600SP25-2S
- Capacity (mAh): 2600
- Voltage: 7,4V
- Dimensions(+- .5mm)H - 21.0, W - 35.0, L - 120.0
- Approx Weight (g): 140
- Max Continuous Discharge 25C (>60A)
- Max Burst Discharge 40C(>100A)
- Current Cut-off 5,5V
- Charge (suggestion): 2600mA
Advantage: super slim design, high current battery, newest generation
|
|
|
|
LiPo battery 7,4V 2600mAh 35C/70C V8 2S1P
| #847 |
 |
NEW! V8 Series by DesirePower
LiPo 7,4V 2600mAh (2S1P) 35 / 70C
Spec. - Model Number: 2600XP35-2S
- Capacity (mAh): 2600
- Voltage: 7,4V
- Dimensions(+- .5mm)H - 12.0, W - 44.0, L - 134.0
- Approx Weight (g): 145
- Max Continuous Discharge 35C (91A)
- Max Burst Discharge 70C (182A)
- Current Cut-off 5,5V
Advantage: super slim design, high current battery, newest generation |
|
|
|
LiPo battery 7,4V 3300mAh 25C V6 2S1P
| #848 |
 |
NEW! V6 super power series
LiPo battery 7,4V 3300mAh, 25C / 50C
Comes with XH charge balance connector and Power T-connector. Specs.
- Model Number: V63300SP25-2S
- Capacity (mAh): 3300
- Voltage: 7,4V
- Dimensions(+- .5mm)H - 13.0, W - 43.0, L - 136.0
- Approx Weight (g): 160
- Continuous Discharge (max) 25C (82,5A)
- Burst discharge current (max) 50C (165A)
- Current Cut-off 5,5V
- Charge (suggestion): max 3300mA
Advantage: super slim design, high current battery, newest generation To charge your lithium battery please use adapted chargers only.
Recommended Multi-chargers with balancer port
|
|
|
|
LiPo battery 7,4V 4200mAh 35C/70C V8 2S1P
| #849 |
|
|
NEW! V8 Series by DesirePower
LiPo 7,4V 4200mAh (2S1P) 35 / 70C
Spec. - Model Number: 4200XP35-2S
- Capacity (mAh): 4200
- Voltage: 7,4V
- Dimensions(+- .5mm)H - 17.0, W - 44.0, L - 134.0
- Approx Weight (g): 216
- Max Continuous Discharge 35C (147A)
- Max Burst Discharge 70C (294A)
- Current Cut-off 5,5V
Advantage: super slim design, high current battery, newest generation |
|
|
|
LiPo battery 7,4V 4200mAh 45C/70C V8 2S1P
| #850 |
|
|
NEW! V8 Series by DesirePower
LiPo 7,4V 4200mAh (2S1P) 45 / 90C
Spec. - Model Number: 4200XP45-2S
- Capacity (mAh): 4200
- Voltage: 7,4V
- Dimensions(+- .5mm)H - 16.0, W - 44.0, L - 134.0
- Approx Weight (g): 208
- Max Continuous Discharge 45C (189A)
- Max Burst Discharge 90C (378A)
- Current Cut-off 5,5V
Advantage: super slim design, high current battery, newest generation |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Long nose plier 6"
| #865 |
 |
High precision long nose plier from ENDURA
nose length: 58mm
Total lenght: 150mm (6")
|
|
|
|
Long nose plier 6"
| #866 |
 |
Profi long nose plier
Professional quality for heavy duty use
lenght: 160mm (6")
+ precise joint for optimum leverage
+ induction-hardend cutting edge 60 / 64 HRC
+ ergonomically refined design for maximum comfort
+ 2komponent handle technology
+ GS tested for safety
|
|
|
|
Long nose plier 8"
| #867 |
|
|
Profi long nose plier
Professional quality for heavy duty use
lenght: 200mm (8")
+ precise joint for optimum leverage
+ induction-hardend cutting edge 60 / 64 HRC
+ ergonomically refined design for maximum comfort
+ 2komponent handle technology
+ GS tested for safety
|
|
|
|
Long nosed pliers 40mm
| #868 |
 |
Long nosed pliers 40mm made from special steel. Robust daily tool with longer life cycle for a budget price. Special alloy steel with harden heat treated wich make higher hardness, higher tenacity and excellent wear-resistance. |
|
|
|
|
|
|
|
|
|
|
|
|
|
Magnetic Bit Holder 90mm
| #874 |
 |
Magnetic Bit Holder for 1/4" Bits
ø 10 x 90 mm, Form E6,3 1/4"
Sechskant DIN 3126 /ISO 1173 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Manual drilling maschine up to 6mm
| #883 |
 |
Hand Drills up to 6mm This manual drilling maschine made by SCHRÖDER in Wuppertal is for use up to 6 mm or 1/4" drills. Useful for smal and difficult work.
Overall length 235 mm, handle made of wood. Quality tooling made by SCHRÖDER Germany compatible drill set |
|
|
|
Manual drilling maschine up to 8mm
| #884 |
 |
Hand Drills up to 8mm This manual drilling maschine made by SCHRÖDER in Wuppertal
is for use up to 8 mm drills. Useful for smal and difficult work.
Overall length 235 mm, handle made of wood.
Quality tooling made by SCHRÖDER Germany. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Men's T-Shirt classic, Desire Power Logo
| #891 |
 |
Classic designed men's T-Shirt 100% Cotton
Quality material of 110g/m² Our Customers get a T-Shirt for free as gift with any order of Desire Power LiPo's up to 50€. Please let us know your size.
|
|
|
|
Messerschmitt T-109
| #892 |
 |
Messerschmitt T-109 Testbericht in FMT 06/2011! Die Messerschmitt gehört wohl zu den bekanntesten deutschen Jagdflugzeugen und überzeugt wie das Original durch hervorragende Flugeigenschaften. Um die Langstreckentauglichkeit des Originals zu verbessern, hat man sich entschlossen das Flugzeug mit Doppelrumpf umzukonstruieren und herausgekommen ist die T-109. Unser Modell wird fertig lackiert und vormontiert geliefert.
Lieferumfang:
* Fertigmodell aus Formschaum
* Fertig lackiert wie abgebildet
* 2 x Brushless-Motor
* 2 x Brushless-Regler mit integrierter Empfängerstromversorgung (BEC)
* 4 x Mini-Servos
* Fahrwerk, Anlenkungen, Kleinteile
* Dekorbogen und Montagehinweise
| Technische Daten * | | Spannweite mm | 1200 | | Länge mm | 760 | | Gewicht g | 850 | | Im Lieferumfang (teilweise vormontiert) | 2 x Brushless Motor PICHLER (Außenläufer)
2 x Brushless Regler PICHLER
4 x Mini-Servo PICHLER | | Sonderzubehör | LiPo Akku LEMONRC 850-11.1V, #C1440 |
* Technische Änderungen und Irrtümer vorbehalten |
|
|
|
|
|
Micro Servo 5g 10Ncm
| #894 |
 |
Sub-Micro-Servo from the leading servo producer DYS
Spec.: Torque: 1,0 kg/cm
Speed: 0,12sek / 60°
Dimensions: 20x11,8x21,5 mm
Weight: 5.0 g
Voltage: 4,8 - 6V
|
|
|
|
|
|
Micro Servo 9g 18Ncm
| #896 |
 |
Sub-Micro-Servo from the leading servo producer DYS
Spec.: Torque: 1,8 kg/cm
Speed: 0,10sek / 60°
Dimensions: 23x12,5x30 mm
Weight: 9.0 g
Voltage: 4,8 - 6V
|
|
|
|
Money Display Case
| #897 |
 |
Money Display Case 100pcs. contains PH and PZ TIN-Bits Dim. 225 x 195 x 35 mm
|
|
|
|
Money Display Case Classic-Bits 100pcs.
| #898 |
|
|
Money Display Case 100pcs. Classic-Bits Contents:
15 x PH1
20 x PH2
10 x PH3
5 x flat 0,8 x 5,5mm
15 x PZ1
20 x PZ2
10 x PZ3
5 x flat 1,2 x 6,5mm
Dimension:
225 x 195 x 35 mm
|
|
|
|
|
|
|
|
|
|
NiMh Akku Set 4 x Type AA 1,2V 2300mAh
| #902 |
 |
Nickel Metal Hybride battery Type AA 1.2V 2300mAh
For all kinds of equipment such as RC-Transmitter / -receiver, radios, modelcars, home appliances, 2-way radio equipment, didgital cameras
Robust consumer battery with high cycle life and reduced resistant.
|
|
|
|
NiMh Akku Set 4 x Type AAA 1,2V 850mAh
| #903 |
 |
Nickel Metal Hybride battery Type AAA 1.2V 850mAh
For all kinds of equipment such as RC-Transmitter / -receiver, radios, modelcars, home appliances, 2-way radio equipment, didgital cameras
Robust consumer battery with high cycle life and reduced resistant.
|
|
|
|
NiMh Akku Type AA 1,2V 1700mAh
| #904 |
 |
Nickel Metal Hybride battery Type AA 1.2V 1700mAh
Resistance: <35mOhm
Weight: 29g
For all kinds of power supply such as RC-Transmitter / -receiver, radios, modelcars, home appliances, 2-way radio equipment Standard charge: 170mA for 15h
Quick charge: 510mA for 5h Robust consumer battery with high cycle life and reduced resistant.
|
|
|
|
NiMh Akku Type AA 1,2V 2000mAh
| #905 |
|
|
Nickel Metal Hybride battery Type AA 1.2V 2000mAh
Resistance: <35mOhm
Weight: 29g
For all kinds of power supply such as RC-Transmitter / -receiver, radios, modelcars, home appliances, 2-way radio equipment Standard charge: 200mA for 15h
Quick charge: 600mA for 5h Robust consumer battery with high cycle life and reduced resistant.
|
|
|
|
Nine Eagles Kestrel 500 SX RC-Helicopter
| #906 |
 |
NineEagle Kestrel 500 SX RC-Helikopter RTF (ready to fly)
Advanced Co-Axial Pilots MUST FLY the Kestrel 500SX. The Kestrel 500SX has been engineered and patented by NineEagles™ to help Advanced Co-axial Pilots to take the next step to single rotor helicopters. This is the MOST STABLE single rotor helicopter on the market. After trimming you can hover, hands off the transmitter just like a Nine Eagles™ Co-axial Helicopter. It not only flies great, it looks fantastic with the same body design as the Kestrel 500. The 2.4GHz system delivers excellent flight stability, and no interference from other radios. The transmitter features a Dual Rate Switch for beginners, control switch, concealed Dip Switches and Mode Conversion capability.
Technical features:
Flying weight: 185g
Overall lenght: 355mm
Main rotor diameter: 380mm
Power System: 180er motor
Transmitter: 2,4Ghz 4 channels
Battery: 7,4V 600mAh
Delivery contents:
Single Blade Helicopter RTF (ready to fly)
NineEagles Micro-computer controlled Balance Charger
Power adapter
Spare Set Rotor Blades
Special Power battery 7,4V 600mAh
NineEagle 2,4Ghz 4 CH Transmitter The Kestrel 500SX has a strong tailmotor allowing good control and quick direction changes.
Hinged battery frame design helps you install the battery simply and easily.
The red and white LED lights look great.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Phillips (PH) cross head TIN-Bits 1/4"
| #920 |
 |
Titanium Nitride coated cross sloted screw driver bits PH (Phillips)
DIN 3126 / ISO 1173
- high surface hardness (-90 HRc)
- increase in roughness
- good bonding of steel and coating
- long life
- reduced cam out forces
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Phillips cross head PH screwdriver bits
| #940 |
 |
Classic Screwdriver Bits 6,35mm Form C3 , 1/4in hexagon drive, 25mm, DIN3126 / ISO1173 Schroeder screwdriver bits are designed for tough applications found in both Trade and Industry.
Strictly controlled manufacturing processes helps fulfill the highest quality requirements. They provide the transfer of high torque values and deliver a long service life.
|
|
|
|
PHZ Bit Two in one 25mm
| #941 |
 |
PHZ-Bit - First bit for PH- and PZ-Srews Titan-Nitrit plated C6,3 1/4"Skt, 25mm, DIN3126 / ISO1173 The PHZ-Bit from Schröder offers the solution: it can be used either for Pozidriv or Phillps screws. It can easily be recognized by its shape and the golden tip. The bit is coated on a titanium nitrite basis, so that the PHZ-Bit is also highly durable. Specially for carpenters and dry mortarless constructors, the PHZ-Bit offers big advantage, because the screws in this field often have both types of driver, Pozidriv or Phillps. With the PHZ-Bit you only need size 1,2 and 3 and they cover 6 sizes of Pozidriv or Phillps screw. |
|
|
|
PHZ Bit Two in one 50mm long version
| #942 |
 |
PHZ-Bit - First bit for PH- and PZ-Srews Titan-Nitrit plated C6,3 1/4"Skt, 25mm, DIN3126 / ISO1173 The PHZ-Bit from Schröder offers the solution: it can be used either for Pozidriv or Phillps screws. It can easily be recognized by its shape and the golden tip. The bit is coated on a titanium nitrite basis, so that the PHZ-Bit is also highly durable. Specially for carpenters and dry mortarless constructors, the PHZ-Bit offers big advantage, because the screws in this field often have both types of driver, Pozidriv or Phillps. With the PHZ-Bit you only need size 1,2 and 3 and they cover 6 sizes of Pozidriv or Phillps screw. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Pin Vice and tool holder
| #952 |
 |
Pin Vice and tool holder This tool holder is usefull to grip very smal drills and other tools. It has an overall length of 150 mm and accepts bits from 0.75 to 9 mm. Handle made of plastic. Made by Schröder in Germany. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Pliers
| #966 |
 |
Long nosed pliers 40mm made from special steel. Robust daily tool with longer life cycle for a budget price. Special alloy steel with harden heat treated wich make higher hardness, higher tenacity and excellent wear-resistance. |
|
|
|
Polo Cap Desire Power Logo
| #967 |
 |
Desire Power Polo Cap
Our Customers get a T-Shirt for free as gift with any order of Desire Power LiPo's up to 50€. Please let us know your size.
|
|
|
|
|
|
Power Drill ABB Superfix 320 toolset
| #969 |
 |
Power Drill Superfix 320 Tool-Set
High quality power tool by ABB for budget price.  + 22 Nm Max Torque
+ 30 bis 1100 R/pm
+ 1,45 kg leight incl. battery
+ 10 mm quick release chuck
+ two Ni-Cd Akkus für unterbrechungsfreies Arbeiten
+ catched with 18 steps 0,5 bis 4,4 Nm
+ integrated beld clip,
+ 2 speet gearbox
+ Aktiver Drehstop
Included in delivery:
1 x Superfix 320
2 x Battery 12V 1,2Ah SDF320
1 x Charger SDF320 Technische Daten
|
|
|
|
Power T serial cable
| #970 |
 |
Power T serial connection wire With this adaptor it is easy possible to put 2 battery packs in line. The available current will be doubled.
Easy to use, without soldering work. High flixible silicon wire. Lenght between connectors: appr. 11cm
|
|
|
|
|
|
|
|
Pozidriv (PZ) cross head TIN-Bits 1/4"
| #973 |
 |
Titanium Nitride coated cross sloted screw driver bits PZ (Pozidrive)
DIN 3126 / ISO 1173
- high surface hardness (-90 HRc)
- increase in roughness
- good bonding of steel and coating
- long life
- reduced cam out forces
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Pozidrive cross-slot PZ
| #990 |
 |
Classic Bits 6,35 mm Form C3 , 1/4" Skt, 25mm, DIN3126 / ISO1173 Universal bit for all kind of use.
|
|
|
|
|
|
|
|
Professional Multi-function Balancer
| #993 |
 |
NEW! Multifunction rotorblade and propeller balancer
Features: + Adjustable diameter shaft from 3mm-15mm
+ Precise balancing with stable stand
+ 6pcs precise ball bearings
+ Water level design
+ Magnetic suspension
+ Multi-function application
Assembly and handling instruction
|
|
|
|
Profi Srew driver Set 7-pc
| #994 |
 |
7 pieces precision engineer and modeling
tool set from TOPCAD.
The set box contains the following tools:
1x screw driver, 2,5mm
1x cross-head, PH0
3x internal hexagon, H=1,5; 2; 2,5mm
2 outside hexagon H=4; 5,5mm (M2 and M3)
Best TOPCAD quality tools in handy tool bag.
|
|
|
|
|
|
|
|
Screw assortment M2 (screws, nuts, washers) 160pcs.
| #997 |
 |
Screw assortment M2 stainless steel A2 Set:
- 10 x hexagon socket screw DIN912: M2 x 4, M2 x 6, M2 x 8, M2 x 12, M2 x 16
- 10 x sloted screw M2 x 10
- 25 x hexagon nuts M2
- 10 x lock nuts M2
- 50 x washers 2,2mm
- 25 x locking ring 2,1mm
170 pcs, in high quality assortment box.
|
|
|
|
Screw assortment M2,5 stainless 230pcs.
| #998 |
 |
Screw assortment M2,5
stainless steel A2 Inhalt:
20 x hexagon socket screws DIN912: M2,5 x 4
20 x hexagon socket screws DIN912: M2,5 x 6
25 x hexagon socket screws DIN912: M2,5 x 10
10 x hexagon socket screws DIN912: M2,5 x 14
10 x hexagon socket screws DIN912: M2,5 x 18
10 x hexagon socket screws DIN912: M2,5 x 20
10 x sloted cylinder head DIN 84 M2,5 x 6
50 x U-Scheiben 2,5mm
25 x hex nuts DIN 934 M2,5
25 x lock nuts DIN 985 M2,5mm
Total 230 pcs. in high quality assortment box. Saving of single purchase: 6,50EUR |
|
|
|
|
|
Screw assortment M3 (screws, nuts, washers) 260 pcs.
| #1000 |
 |
Screwset "modeling" M3
stainless steel A2 Set:
- 25 x
 hexagon socket screw DIN912: M3 x4, M3x10, M3x10, M2x16, M3x20, - 10 x M3x25
- 25 x
 hexagon nuts M3 - 25 x
 washers 3,2mm
- 25 x
 locking ring 3,2mm - 25 x selflocking nuts M3 (plastic stop)
260 pcs, in high quality assortment box.
|
|
|
|
Screw assortment M4 (screws, nuts, washers) 180 pcs.
| #1001 |
 |
screwset "Socket" M4 stainless steel A2 Set:
10 x hexagon socket screw DIN912: M4 x8, M4x10, M4x16, M4x20, M4x25,M4x30 (5x)
50 x hexagon nuts M4
25 x washers 4,2mm
25 x locking ring 4,2mm 180 pcs, in high quality assortment box. Find here our high-grade ball head hex screwdrivers.
|
|
|
|
Screw assortment M5 (screws, nuts, washers) 200 pcs.
| #1002 |
 |
screw assortment box socket screws M5
stainless steel A2 Assortment:
- 20 x hexagon socket screw DIN912: M5 x 10, M5 x 20
- 10 x hexagon socket screw DIN 912: M5 x 30
- 20 x counter sunk hex DIN7991: M5 x 30
- 50 x washers 5,3mm
- 20 x nuts M5 DIN 934
- 20 x head nuts M5 DIN 1587
- 20 x lock nuts DIN 985 M5
Total 200 pcs. in handy assortment box. |
|
|
|
Screw extractor set M4-20
| #1003 |
 |
Set M4-20
from high quality chrom vanadium steel, expert heat treated, 54-56 HRc to remove brocken screws, studs and pipes. Mode of operation:
Drill hole with the recommended twist drill into the stud's center and turn the extractor into hole counterclockwise until stud removed. Order here the suitable tap wrench with ratched
|
|
|
|
Screw extractor set M4-24
| #1004 |
|
|
Screw extractor set M4-24
from high quality chrom vanadium steel, expert heat treated, 54-56 HRc to remove brocken screws, studs and pipes. Mode of operation:
Drill hole with the recommended twist drill into the stud's center and turn the extractor into hole counterclockwise until stud removed. Order here the suitable tap wrench with ratched
|
|
|
|
|
|
Screwdriver handle interchangeable double end blades
| #1006 |
 |
Interchangeable double end blades made from high alloy steel
hard chromium plated
Spar parts for EXATORQ-SET 1.171.4
single use for screwdriver handle 1.170.0 EXATORQ-VH for reversible-blades
Klingenlänge: 175mm
Lieferbar in den Abmessungen:
- Inbus Sechskant
- Inbus Kugelkopf
- Flachklingen
- Kreuz PZ1; PZ2
- Kreuz PH1; PH2
- Torx
|
|
|
|
|
|
|
|
|
|
|
|
Screwdriver and saw
| #1011 |
 |
NEW
Comforce Screwdriver and saw set: Comforce-tool handle with 1 wood- and 1 metal saw-blade one knife
|
|
|
|
Screwdriver and saw set
| #1012 |
 |
NEW
Comforce Screwdriver and saw set:
Comforce-tool handle
incl.
3 Bits 50mm FormE 6,3
1 magnetic holder 61mm FormE 6,3
1 wood- and 1 metal saw-blade
1 serrated knife blade
1 burring bit
|
|
|
|
Screwdriver COMFORCE - flextec
| #1013 |
 |
Screwdriver COMFORCE - flextec
- the modern screwdriver with lots of advantages
The integrated bitholder can carry up to 6 Bits. You have your needed screwdriving tool immediately ready. The patent flexible handle can increase your force for high torque.
Set includes:
Comforce - flextec handle with ratched
6 x HiCrom Bits with high surface hardness (70 HRc)
1 x PH1
1 x PH2
1 x PH3
1 x PZ1
1 x PZ2
1 x flat blade 6,5mm
|
|
|
|
Screwdriver COMFORCE CL Compact Set
| #1014 |
 |
The innovative screwdriver and protorq-mechanic with mit Rechts- Linkslauf und MittelpositionScrewdriver Set COMFORCE Toolbox
Included in delivery: - COMFORCE CL screwdriver with ratched
- Adaptor 1/4" 6 SKT / 1/4" VKT
- PH1 / PH2 / PH3
- PZ1 / PZ2 / PZ3
- hexagonal Inbus 2,0 / 2,5 / 3,0 / 4,0 / 5,0 / 6,0 mm
- Flat blade 3,0 / 4,5 / 5,5 / 6,0 / 6,5 / 8,0 mm
- TX8 / TX9 / TX10 / TX15 / TX20 / TX25 / TX27 / TX30 /TX40
with Metallbox |
|
|
|
Screwdriver COMFORCE CL universal set
| #1015 |
 |
Screwdriver COMFORCE CL universal set with 6 HiCrom Bits and Bitsholder
With this set and the included Bits you have your needed tools always ready to go. Protorq handle is flexible and well designed to transmit high torq where ever you need.
Contains:
Comforce Protorq CL handle with ratched
6 x HiCrom Bits
1 x PH1
1 x PH2
1 x PH3
1 x PZ1
1 x PZ2
1 x flat blade 6,5mm
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Screwdriver Set COMFORCE protorq Profi Set
| #1033 |
 |
Screwdriver Set COMFORCE Toolbox Profi Set
Included in delivery: - COMFORCE screwdriver with ratched for 6mm connection
- flexible extension
- Adaptor 1/4" VKT
- 11 nutdriver 4 / 5 / 5,5 / 6 / 7 / 8 / 9 / 10 / 11 / 12 / 13mm
- 22 Bits, Torx, Inbus, Flach PH and PZ in high class plastic box with marked inlay.
Inch Version...
|
|
|
|
Screwdriver Set COMFORCE protorq Profi Set inches
| #1034 |
|
|
Screwdriver Set COMFORCE Toolbox, inches measurement
Inches Profi Set screwdriver box
Included in delivery: - COMFORCE screwdriver with ratched for 6mm connection
- flexible extension
- Adaptor 1/4" VKT
- 11 nutdrivers (inch dimension)
- 22 Bits, Torx, hexagonal, flat-blade, PH and PZ in high class plastic box with marked inlay.
|
|
|
|
Screwdriver Set EXATORQ PHZ 1,2,3 incl. holder
| #1035 |
 |
Untitled document Screwdriver Set EXATORQ-PHZ 1,2,3
bitmixx Screwdriver Set with handy holder
1x 0.556.0, Gr. PHZ 1 x 80mm
1x 0.557.0, Gr. PHZ 2 x 100mm
1x 0.558.0, Gr. PHZ 3 x 150mm
Here is the right one!
The PHZ-Bit from Schröder offers the solution: it can be used either for Pozidriv or Phillps screws. It can easily be recognized by its shape and the golden tip. The bit is coated on a titanium nitrite basis, so that the PHZ-Bit is also highly durable. Specially for carpenters and dry mortarless constructors, the PHZ-Bit offers big advantage, because the screws in this field often have both types of driver, Pozidriv or Phillps. With the PHZ-Bit you only need size 1,2 and 3 and they cover 6 sizes of Pozidriv or Phillps screw. |
|
|
|
Screwdriver Set EXATORQ-VDE
| #1036 |
 |
High quality screwdriver EXATORQ-VDE 7 piece sets
2,5 x 75 / 3,5 x 100 / 4,0 x 100 / 5,5 x 125 / Spannungsprüfer
PH 1 x 80 / PH 2 x 100 Well known EXATORQ screwdrivers now available as set in most common sizes.
|
|
|
|
Screwdriver Set Universal
| #1037 |
 |
High quality screwdriver 6 piece set. Well known EXATORQ screwdrivers now available as set in most common sizes.
|
|
|
|
Screwdriver Set Universal PZ
| #1038 |
 |
High quality screwdriver 6 piece se
4 pc. flat, 2 pc. cross PZ
Well known EXATORQ screwdrivers now available as set in most common sizes.
|
|
|
|
Screwdriver Set VDE EXATORQ PHZ 1,2,3 incl. holder
| #1039 |
 |
Untitled document Screwdriver Set VDE EXATORQ-PHZ 1,2,3
bitmixx Screwdriver Set with handy holder
PHZ 1 x 80mm
PHZ 2 x 100mm
PHZ 3 x 150mm
Here is the right one!
The PHZ-Bit from Schröder offers the solution: it can be used either for Pozidriv or Phillps screws. It can easily be recognized by its shape and the golden tip. The bit is coated on a titanium nitrite basis, so that the PHZ-Bit is also highly durable. Specially for carpenters and dry mortarless constructors, the PHZ-Bit offers big advantage, because the screws in this field often have both types of driver, Pozidriv or Phillps. With the PHZ-Bit you only need size 1,2 and 3 and they cover 6 sizes of Pozidriv or Phillps screw. |
|
|
|
|
|
Screwdriver Set with wooden handle
| #1041 |
 |
High quality screwdriver Set with wooden handle, through-blade and hexagon bolster. 6 piece set 3,5 x 75 / 4,5 x 75 / 5,5 x 100 / 6,5 x 125 mm
PH 1 x 85 / PH 2 x115
|
|
|
|
Secure clip servo cable
| #1042 |
 |
Secure clip for servo extention These are a great way to hold your servo plugs in place.
|
|
|
|
|
|
Servo Y-Wire 150mm (JR / Graupner)
| #1044 |
 |
Servo Y-Wire 150mm (JR / Graupner) * high grade silicon wire 0,32mm2
* gold surface plated contacts
* safely connection
* 1 x plug, 2 x socket
|
|
|
|
Servo Y-Wire 300mm (JR / Graupner)
| #1045 |
|
|
Servo Y-Wire 300mm (JR / Graupner) * high grade silicon wire 0,32mm2
* gold surface plated contacts
* safely connection
* 1x plug, 2 x socket
|
|
|
|
Servo Y-Wire 500mm (JR / Graupner)
| #1046 |
|
|
Servo Y-Wire 500mm (JR / Graupner) * high grade silicon wire 0,32mm2
* gold surface plated contacts
* safely connection
* 1 x plug, 2 x socket
|
|
|
|
Servo Y-Wire 600mm (JR / Graupner)
| #1047 |
|
|
Servo Y-Wire 600mm (JR / Graupner) * high grade silicon wire 0,32mm2
* gold surface plated contacts
* safely connection
* 1 x plug, 2 x socket
|
|
|
|
Servo Y-Wire 900mm (JR / Graupner)
| #1048 |
|
|
Servo Y-Wire 900mm (JR / Graupner) * high grade silicon wire 0,32mm2
* gold surface plated contacts
* safely connection
* 1 x plug, 2 x socket
|
|
|
|
Side cutting plier 10mm
| #1049 |
 |
Side cutting pliers 10mm made from special steel. Robust daily tool with longer life cycle for a very budget price. Special alloy steel with harden heat treated wich make higher hardness, higher tenacity and excellent wear-resistance. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SoloPro Gear Set
| #1059 |
 |
Solo Pro Spare Part Service NE10126004006 Gear Set SoloPro V1 and V2
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Speed controler 100A
| #1070 |
 |
Powerfull 100 A speed controler 45 x 24 x 9 mm , weights 27 gram
Constant current 100A Max 110A (20sec)
Li-Poly 2-7 cells; Ni-MH 4-12 cells Auto Detect
Auto shut down without signal
Limited programmability easy to use.
Auto Low battery Slow down at 3.0V/Lipo, cut-off Our most powerfull ESC for extrem low price. Order now!
|
|
|
|
Speed controler 10A BEC Skyrc Swift
| #1071 |
 |
Skyrc Swift Speed Controler 12V 10A This Swift Speed controler with Linear 2A BEC incorporates the latest technological developments. You have got a very efficient controller for brushless motors use. Our priority was reliability and simple to use. All SWIFT controllers are ready to fly straight from the package, no programming necessary. They are defaulted to AUTO LIPO detect and no brake. Should users wish to modify these settings, they may do so using their transmitter.
Even if programming sequences of SWIFT speed Controllers are particularly logical and therefore very easy, using and operating requires some knowledge and a few basic skills.
Please read through instructions entirely before attempting to operate with these electronic devices. High power system for RC model can be very dangerous, so we strongly suggest you read this manual carefully.
This Speed Controler has a Futaba Receiver connector and high grade robust silicon power wires. Because of its compact design it can be used in almost every area of RC-Flight equipment.
Spec.
- 23.5 x 15.7 x 6.1 mm , weights 8 gram
- Constant current 10A Max 12.5A
- Li-Poly 2-3 cells; Ni-MH 4-8 cells Auto Detect
- BEC: 5V 1A
- Auto shut down without signal
- Limited programmability easy to use.
- Auto Low battery Slow down at 3.0V/Lipo, cut-off at 2.9V/Lipo
|
|
|
|
Speed controler 20A BEC Skyrc Swift
| #1072 |
 |
Skyrc Swift Speed Controler 20 12V 20A This Swift Speed controler with Linear 2A BEC incorporates the latest technological developments. You have got a very efficient controller for brushless motors use. Our priority was reliability and simple to use. All SWIFT controllers are ready to fly straight from the package, no programming necessary. They are defaulted to AUTO LIPO detect and no brake. Should users wish to modify these settings, they may do so using their transmitter.
Even if programming sequences of SWIFT speed Controllers are particularly logical and therefore very easy, using and operating requires some knowledge and a few basic skills.
Please read through instructions entirely before attempting to operate with these electronic devices. High power system for RC model can be very dangerous, so we strongly suggest you read this manual carefully.
This Speed Controler has a Futaba Receiver connector and high grade robust silicon power wires. Because of its compact design it can be used in almost every area of RC-Flight equipment.
Spec.
- Constant current: 20A
- 6 - 12V 2-3 LiPo; 5-8 NiMh (Auto Detect)
- BEC: 5V 2A
- Auto shut down without signal
- Dimension: 45 x 24 x 9 mm,
- weight 24 gr
- programmability easy to use.
- Auto low battery slow down at 3.0V/Lipo, cut-off
Controler with softstart, useable for all RC-Modells with maximum current of 20A
|
|
|
|
Speed controler 20A BEC Skyrc Swift
| #1073 |
 |
Skyrc Swift Speed Controler 35 15V 35A BEC 5V 2A This Swift Speed controler with Linear 2A BEC incorporates the latest technological developments. You have got a very efficient controller for brushless motors use. Our priority was reliability and simple to use. All SWIFT controllers are ready to fly straight from the package, no programming necessary. They are defaulted to AUTO LIPO detect and no brake. Should users wish to modify these settings, they may do so using their transmitter.
Even if programming sequences of SWIFT speed Controllers are particularly logical and therefore very easy, using and operating requires some knowledge and a few basic skills.
Please read through instructions entirely before attempting to operate with these electronic devices. High power system for RC model can be very dangerous, so we strongly suggest you read this manual carefully.
This Speed Controler has a Futaba Receiver connector and high grade robust silicon power wires. Because of its compact design it can be used in almost every area of RC-Flight equipment.
Spec.
- Constant current: 35A
- 6 - 15V 2-4 LiPo; 6-12 NiMh (Auto Detect)
- BEC: 5V 2A
- Auto shut down without signal
- Dimension: 45 x 28 x 15 mm,
- weight 24 gr
- programmability easy to use.
- Auto low battery slow down at 3.0V/Lipo, cut-off
Controler with softstart, useable for all RC-Modells with maximum current of 35A
|
|
|
|
Speed controler 30A BEC
| #1074 |
 |
Compact speed controler up to 20A Spec.
- Constant current: 20A (max 25A 20sec)
- 6 - 16,8 V 2-4 LiPo; 4-12 NiMh (Auto Detect)
- BEC: 5V 2A
- Auto shut down without signal
- Dimension: 45 x 24 x 9 mm,
- weight 24 gr
- Limited programmability easy to use.
- Auto low battery slow down at 3.0V/Lipo, cut-off
Controler with softstart, useable for all RC-Modells with maximum current of 20A
|
|
|
|
Speed controler 40A BEC
| #1075 |
 |
Compact speed controler up to 40A Already assembled with 3.5mm gold connectors.
45 x 24 x 9 mm , weights 27 gram
Constant current 40A Max 45A
Li-Poly 2-6 cells; Ni-MH 4-12 cells Auto Detect
BEC: 5V 3A
Auto shut down without signal
Limited programmability easy to use.
Auto Low battery Slow down at 3.0V/Lipo, cut-off
|
|
|
|
Speed controler 50A
| #1076 |
|
|
Compact speed controler 50 A Already assembled with 3.5mm gold connectors.
45 x 24 x 9 mm , weights 27 gram
Constant current 50A Max 60A
Li-Poly 2-6 cells; Ni-MH 4-12 cells Auto Detect
BEC: no
Auto shut down without signal
Limited programmability easy to use.
Auto Low battery Slow down at 3.0V/Lipo, cut-off |
|
|
|
|
|
Spiral Ratchet Screwdriver 1/4" (6.35mm), length 335mm
| #1078 |
 |
Spiral Ratchet Screwdriver 1/4" (6.35mm) chromium plated
length 335mm
with 1/4" (6,35mm) hexagon chuck for bits and reversible double ended bits.
Inclusive reversible Bits in most common use size:
PH No.1 / No.2 / No.3
0,6 x 4,5 mm / 0,8 x 5,5 mm / 1,0 x 7,0 mm
|
|
|
|
Spiral Ratchet Screwdriver 1/4" (6.35mm), length 480mm
| #1079 |
|
|
Spiral Ratchet Screwdriver chromium plated 1/4" (6.35mm)
Lenght 480mm
with 1/4" 6,35 mm hexagon chuck for bits and reversible double ended bits.
Inclusive reversible Bits in most common size:
PH No.1 / No.2 / No.3
0,6 x 4,5 mm / 0,8 x 5,5 mm / 1,0 x 7,0 mm |
|
|
|
|
|
|
|
|
|
|
|
Square bits 25 mm
| #1084 |
 |
Classic Bits square
Shape C3 , 1/4" Skt, 25mm, DIN3126 / ISO1173 Universal bit for all kind of use.
|
|
|
|
|
|
|
|
|
|
|
|
Srew driver Set 18-pc
| #1089 |
 |
18 pieces precision engineer and modeling
tool set with magnetic srew driver.
The box contains the following tools:
4x screw driver, 1,5;2,0;2,5;3mm
4x cross-head, PH00;PH0;PH3;Y0
6x Torx, T3;T4;T5;T6;T8;T10
2x internal hexagon, H2;H2,5
2 various tool bits
in robust box for easy store and handling |
|
|
|
Srew driver Set 28-pc
| #1090 |
 |
28 pieces precision engineer and modeling tool set with magnetic srew driver.
The box contains the following tools:
4x screw driver, 1,5;2,0;2,5;3mm
4x cross-head, PH00;PH0;PH1;PH2; Y0
6x Torx, T3;T4;T5;T6;T8;T10
2x internal hexagon, H1,5; H2;H2,5; 3,0; 3,5; 4,0
Magentic holder
in robust box for easy store and handling. |
|
|
|
Srewdriver Set 32pcs. w. magnet holder
| #1091 |
 |
32 pieces tool set with magnetic srew driver
The box contains following tools:
6x screw driver, 1; 1,3; 1,5; 2; 2,5;3;4mm
7x cross-head, PH00;PH0;PH1;PH2
8x Torx, T4;T5;T6;T7;T8;T10;T15;T20
7x internal hexagon, H1,5;H2;H2,5;H3;H3,5;H4
10 various
1x pincer
in robust box for easy store and handling |
|
|
|
|
|
|
|
Steckerbock (Löthilfe)
| #1094 |
 |
Steckerbock (Löthilfe) Gutes Werkzeug = Voraussetzung für Erfolg im Hobby! Wie oft haben Sie sich beim Löten von Steckern schon die Finger verbrannt oder den Tisch oder die Werkbank verschmort?
Jetzt gibt es den Steckerbock: Eine einzigartige Löthilfe aus hitzebständigem Phenoplast-Kunststoff speziell für die gängigen Stecker im Modellbau: Goldstecker (alle Größen), MPX-, TRX, -EC3, EC4-, T-Stecker usw. Der Stecker wird sicher isoliert eingeklemmt und Sie haben beide Hände frei. Eine einmalige Anschaffung mit der Sie ab sofort völlig streßfrei löten können (Lieferung ohne Stecker). |
|
|
|
|
|
|
|
|
|
|
|
Stubby screwdriver EXAGON-STUBBY
| #1099 |
 |
Stubby screwdriver EXAGON-STUBBY
DIN 5263/5264/5265/5260/5261/5262
Tough impact resistant polypropylene handle, chromium plated blade, black tip | Flachklinge: | 0,8 x 4,0/25 Länge = 80 mm | | | 1,0 x 5,5/25
1,2 x 6,5/25
1,2 x 8,0/25
| | Philipps: | PH 1/25
| | | PH 2
PH 3
|
|
|
|
|
|
|
|
|
|
|
Tap wreches / screw extractor
| #1103 |
 |
Tap Wrench / screw extractor HI+TRAC Set - Tap wrenches with ratched chromium plated, Size 1 M3-8
- Extension 110mm Gr.2 M5-12, patentierte Spannbacken spannen Vierkant und Sechskant
- HITRAC screw extractor CV-steel, hardened to 54-56HRc to extract brocken screws, pins, tubes, 6-pcs. Set M4-24
- tool extension 175mm Gr.1 M3-8
- Tap wrench head for ratched Gr.1 M3-8, Gr.2 M5-12, patentierte Spannbacken spannen Vierkant und Sechskant
Easy to repair brocken screws, pins, tubes.
|
|
|
|
Tap Wrenches with ratchet, Gr.0 M1 - M2,6
| #1104 |
 |
chromium plated M1 - M2,6
Size 0 chrome-vanadium steel length = 85 mm
The tap wrench is multifunctional and highly leadable because of its full-steel version. New developed jaws. Save and professional - the Schröder screw extractors in standard or HiTrac-Version made of high quality chrome-vanadium-steel. 
More details as PDF
|
|
|
|
Tap Wrenches with ratchet, Gr.1 M3-M8
| #1105 |
|
|
Tap Wrenches with ratchet, full chromium plated M3 - M8
 all steel quality The tap wrench is multifunctional and highly leadable because of its full-steel version. The recently developed jaw for clamping square and hexagon drives mekes the tap wrenches in size 2 even more flexible. Safe and professional - the Schröder screw extractors in standard or HiTrac-Version made of high quality chrome-vanadium-steel. More details as PDF
|
|
|
|
Tap Wrenches with ratchet, Gr.2 M5-M12
| #1106 |
|
|
Tap Wrenches with ratchet, full chromium plated M5 - M12
all steel quality lenght = 11mm
Innovative clump, Size 2 is suitable for clamping of both: square and hexagonal drive tools
all steel quality The tap wrench is multifunctional and highly leadable because of its full-steel version. The recently developed jaw for clamping square and hexagon drives mekes the tap wrenches in size 2 even more flexible. Safe and professional - the Schröder screw extractors in standard or HiTrac-Version made of high quality chrome-vanadium-steel. More details as PDF
|
|
|
|
|
|
|
|
TENERGY TB6 Inteligent digital balance charger 50W
| #1109 |
 |
NEW! Original TENERGY TB6 - Powerful inteligent Balance Charger/Discharger for LiPo/LiiO/LiFe/NiMh/NiCd/PB .
Optimized operating software for charge and discharge and safety features. Spec.:
- LiPo/LiLo/LiFe: 1-6 cells 3,7-22,4V; 0,1-5A
- LiPo/LiLo/LiFe in balancer mode: 1-6 cells 3,7-22,4V, 0,1-5A
- NiCd/NiMh: 1-15 cells 1,2-18V, 0,1-5A
- PB 2-20V
- charge/discharge up to 5 cycles
- Fast charging program for Lithium batteries
- PC based analysis using USB communication graph of voltage, current, capacity
- Data storage and load programm for your convenience.
- 16 chr + 2 lines LCD-screen
- Input power cable 11-18V DC
- Individual connection cable for most RC-usage
- Balancer connector: XH
The Charger is an entry level balancing charger and discharger which can handle up to 6 cells and 5A and can handle LiPo/LiFe up to 6S and NiMH/NiCd up to 15S and shows individual cell voltage during charge with realtime updates throughout the charge cycle.
Bundled with the Charger is a bunch of input and output wires which should satisfy any charging requirement.
The integrated fan avoide overheating in fast charging mode. TENERGY can use indoor as well as outdoor. With the included 12V power connector cable it can easy connect to a car batterie.
The processor monitors the voltage of individual cells and manage to normalise the voltage to be equal. A power adapter is available as optional equipment.
|
|
|
|
Third hand
| #1110 |
 |
Third Hand
usefull solder and assembly assistant tool
Hihj quality complete made on metal.
* Size 65 mm Glas (5-times)
* Metal-Standfuß
* Socket appr. 55 x 50 mm
* High max. 200 mm
* Widht max. 260 mm |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Torque Screwdriver set 14pcs. 0,6 - 1,5 Nm
| #1121 |
 |
NEW! FELO Series Nm 100
Precise adjustable Torque Screwdriver set 14pcs.
0,6 - 1,5 Nm(5,3 - 13,3 Inch Pounds)
Advantages: * easy adjustment of torque
* precise release - accoustic and mechanic signal
* superior performance exceed DIN and ISO requirements
* ergonomically designed handle in best FELO 2-K quality
* exchangeable blades for greatest flexibility
* 15 years warranty on material and workmanship Quality assurance: Each tool is standardised with electronic measurement equipment at 23 deg. C to its nominal torque. Results are documented on the certificate with unique serial no.
Included in delivery: - FELO Torq screwdriver handle 0,6 - 1,5 Nm
- adjustment tool
- blades for slot, PH / PZ Torx and Torx plus
- Calibration Certificate (torque measurement)
- handling instruction
- Torque conversion chart Newton / Pounds |
|
|
|
Torque Screwdriver set 14pcs. 1,5 - 3,0 Nm
| #1122 |
 |
NEW! FELO Series Nm 100
Precise adjustable Torque Screwdriver set 14pcs.
1,5 - 3,0 Nm(13,3 - 26,6 Inch Pounds)
Advantages: * easy adjustment of torque
* precise release - accoustic and mechanic signal
* superior performance exceed DIN and ISO requirements
* ergonomically designed handle in best FELO 2-K quality
* exchangeable blades for greatest flexibility
* 15 years warranty on material and workmanship Quality assurance: Each tool is standardised with electronic measurement equipment at 23 deg. C to its nominal torque. Results are documented on the certificate with unique serial no.
Included in delivery: - FELO Torq screwdriver handle 1,5 - 3,0 Nm (13,3 - 26,6 Inch pounds)
- adjustment tool
- blades for slot, PH / PZ Torx and Torx plus
- Calibration Certificate (torque measurement)
- handling instruction
- Torque conversion chart Newton / Pounds |
|
|
|
Torque Screwdriver set 14pcs. 3,0 - 5,4 Nm
| #1123 |
 |
NEW! FELO Series Nm 100
Precise adjustable Torque Screwdriver set 14pcs.
3,0 - 5,4 Nm(26,6 - 47,8 Inch Pounds)
Advantages: * easy adjustment of torque
* precise release - accoustic and mechanic signal
* superior performance exceed DIN and ISO requirements
* ergonomically designed handle in best FELO 2-K quality
* exchangeable blades for greatest flexibility
* 15 years warranty on material and workmanship Quality assurance: Each tool is standardised with electronic measurement equipment at 23 deg. C to its nominal torque. Results are documented on the certificate with unique serial no.
Included in delivery: - FELO Torq screwdriver handle 3,0 - 5,4 Nm (26,6 - 47,8 Inch pounds)
- adjustment tool
- blades for slot 4,0 x 0,8, PH 1 / PH2 / PZ 1 / PZ2
- Torx T15 / T20 / T25
- IP 9 / IP 10 / IP 15
- Calibration Certificate (torque measurement)
- handling instruction
- Torque conversion chart Newton / Pounds |
|
|
|
Torx bits 25 mm
| #1124 |
 |
Classic Bits Torx 6,35 mm Form C3 , 1/4" Skt, 25mm, DIN3126 / ISO1173 Universal bit for all kind of use.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
TORX Bits Exaform TX
| #1133 |
 |
TORX® Bits Exaform Classic, high end class bits
hard and tough, extreme wear-resistent
with 6,35 mm (1/4") hexagon drive, Shape C6,3 nach DIN 3126 / ISO 1173.
|
|
|
|
|
|
|
|
|
|
Torx Screwdriver Set
| #1137 |
 |
High quality torx® screwdriver set 6 screwdriver
(T10,15,20,25,27,30,40)
Well known EXATORQ screwdrivers now available as set in most common sizes.
|
|
|
|
|
|
Torx Screwdriver Set EXAGON 300 mm
| #1139 |
 |
High quality screwdriver EXAGON Torx® 7 piece sets  T10 / T 15 / T 20 / T25 / T27 / T 30 / T 40Well known EXATORQ screwdrivers now available as set in most common sizes.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Torx TIN-Bits 6,35mm 1/4"
| #1198 |
 |
Titanium Nitride coated Bits for Torx
DIN 3126 / ISO 1173
- high surface hardness (-90 HRc)
- increase in roughness
- good bonding of steel and coating
- long life
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
TriWing bits 25 mm
| #1212 |
 |
Classic Bits TriWing
Shape C3 , 1/4" Skt, 25mm, DIN3126 / ISO1173 Universal bit in special TriWing form.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Twisted drills HSS 5 pcs. d=1 mm
| #1225 |
 |
5 piece HSS twist drills d=1 mm
High performance, industrial quality drills are made of high alloy steel for long life, strength and durability. |
|
|
|
Twisted drills HSS 5 pcs. Ø 3,8 mm DIN 338
| #1226 |
|
|
Twisted drills HSS 5 pc. Ø=3,8 mm
HSS Quality drill
DIN 338 Type N, cutting angle 118
Drills are made of high-grade tool steel, tempered for maximum hardness and endurance. |
|
|
|
Twisted drills HSS 5 pcs. Ø 3,9 mm DIN 338
| #1227 |
|
|
Twisted drills HSS 5 pc. Ø=3,9 mm
HSS Quality drill
DIN 338 Type N, cutting angle 118
Drills are made of high-grade tool steel, tempered for maximum hardness and endurance. |
|
|
|
Twisted drills HSS 5 pcs. Ø 4,0 mm DIN 338
| #1228 |
|
|
Twisted drills HSS Ø 4,0 mm
HSS Quality drill
DIN 338 Type N, cutting angle 118
Drills are made of high-grade tool steel, tempered for maximum hardness and endurance. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Twisted drills HSS 5 pcs. Ø=2 mm DIN 338
| #1238 |
|
|
Twisted drills HSS 5 pc. Ø=2 mm
HSS Quality drill
DIN 338 Type N, cutting angle 118
Drills are made of high-grade tool steel, tempered for maximum hardness and endurance. |
|
|
|
Twisted drills HSS 5 pcs. Ø=2,1 mm DIN 338
| #1239 |
|
|
Twisted drills HSS 5 pc. Ø=2,1 mm
HSS Quality drill
DIN 338 Type N, cutting angle 118
Drills are made of high-grade tool steel, tempered for maximum hardness and endurance. |
|
|
|
Twisted drills HSS 5 pcs. Ø=2,2 mm DIN 338
| #1240 |
|
|
Twisted drills HSS 5 pc. Ø=2,2 mm
HSS Quality drill
DIN 338 Type N, cutting angle 118
Drills are made of high-grade tool steel, tempered for maximum hardness and endurance. |
|
|
|
Twisted drills HSS 5 pcs. Ø=2,3 mm DIN 338
| #1241 |
|
|
Twisted drills HSS 5 pc. Ø=2,3 mm
HSS Quality drill
DIN 338 Type N, cutting angle 118
Drills are made of high-grade tool steel, tempered for maximum hardness and endurance. |
|
|
|
Twisted drills HSS 5 pcs. Ø=2,4 mm DIN 338
| #1242 |
|
|
Twisted drills HSS 5 pc. Ø=2,4 mm
HSS Quality drill
DIN 338 Type N, cutting angle 118
Drills are made of high-grade tool steel, tempered for maximum hardness and endurance. |
|
|
|
Twisted drills HSS 5 pcs. Ø=2,5 mm DIN 338
| #1243 |
|
|
Twisted drills HSS 5 pc. Ø=2,5 mm
HSS Quality drill
DIN 338 Type N, cutting angle 118
Drills are made of high-grade tool steel, tempered for maximum hardness and endurance. |
|
|
|
Twisted drills HSS 5 pcs. Ø=2,6 mm DIN 338
| #1244 |
|
|
Twisted drills HSS 5 pc. Ø=2,6 mm
HSS Quality drill
DIN 338 Type N, cutting angle 118
Drills are made of high-grade tool steel, tempered for maximum hardness and endurance. |
|
|
|
Twisted drills HSS 5 pcs. Ø=2,7 mm DIN 338
| #1245 |
|
|
Twisted drills HSS 5 pc. Ø=2,7 mm
HSS Quality drill
DIN 338 Type N, cutting angle 118
Drills are made of high-grade tool steel, tempered for maximum hardness and endurance. |
|
|
|
Twisted drills HSS 5 pcs. Ø=2,8 mm DIN 338
| #1246 |
|
|
Twisted drills HSS 5 pc. Ø=2,8 mm
HSS Quality drill
DIN 338 Type N, cutting angle 118
Drills are made of high-grade tool steel, tempered for maximum hardness and endurance. |
|
|
|
Twisted drills HSS 5 pcs. Ø=2,9 mm DIN 338
| #1247 |
|
|
Twisted drills HSS 5 pc. Ø=2,9 mm
HSS Quality drill
DIN 338 Type N, cutting angle 118
Drills are made of high-grade tool steel, tempered for maximum hardness and endurance. |
|
|
|
Twisted drills HSS 5 pcs. Ø=3,0 mm DIN 338
| #1248 |
|
|
Twisted drills HSS 5 pc. Ø=3 mm
HSS Quality drill
DIN 338 Type N, cutting angle 118
Drills are made of high-grade tool steel, tempered for maximum hardness and endurance. |
|
|
|
Twisted drills HSS 5 pcs. Ø=3,1 mm DIN 338
| #1249 |
|
|
Twisted drills HSS 5 pc. Ø=3,1 mm
HSS Quality drill
DIN 338 Type N, cutting angle 118
Drills are made of high-grade tool steel, tempered for maximum hardness and endurance. |
|
|
|
Twisted drills HSS 5 pcs. Ø=3,2 mm DIN 338
| #1250 |
|
|
Twisted drills HSS 5 pc. Ø=3,2 mm
HSS Quality drill
DIN 338 Type N, cutting angle 118
Drills are made of high-grade tool steel, tempered for maximum hardness and endurance. |
|
|
|
Twisted drills HSS 5 pcs. Ø=3,3 mm DIN 338
| #1251 |
|
|
Twisted drills HSS 5 pc. Ø=3,3 mm
HSS Quality drill
DIN 338 Type N, cutting angle 118
Drills are made of high-grade tool steel, tempered for maximum hardness and endurance. |
|
|
|
Twisted drills HSS 5 pcs. Ø=3,4 mm DIN 338
| #1252 |
|
|
Twisted drills HSS 5 pc. Ø=3,4 mm
HSS Quality drill
DIN 338 Type N, cutting angle 118
Drills are made of high-grade tool steel, tempered for maximum hardness and endurance. |
|
|
|
Twisted drills HSS 5 pcs. Ø=3,5 mm DIN 338
| #1253 |
|
|
Twisted drills HSS 5 pc. Ø=3,5 mm
HSS Quality drill
DIN 338 Type N, cutting angle 118
Drills are made of high-grade tool steel, tempered for maximum hardness and endurance. |
|
|
|
Twisted drills HSS 5 pcs. Ø=3,6 mm DIN 338
| #1254 |
|
|
Twisted drills HSS 5 pc. Ø=3,6 mm
HSS Quality drill
DIN 338 Type N, cutting angle 118
Drills are made of high-grade tool steel, tempered for maximum hardness and endurance. |
|
|
|
Twisted drills HSS 5 pcs. Ø=3,7 mm DIN 338
| #1255 |
|
|
Twisted drills HSS 5 pc. Ø=3,7 mm
HSS Quality drill
DIN 338 Type N, cutting angle 118
Drills are made of high-grade tool steel, tempered for maximum hardness and endurance. |
|
|
|
Twisted drills HSS Ø 4,1 mm 5 pcs. DIN 338
| #1256 |
|
|
Twisted drills HSS 5 pc. Ø 4,1 mm
HSS Quality drill
DIN 338 Type N, cutting angle 118
Drills are made of high-grade tool steel, tempered for maximum hardness and endurance. |
|
|
|
Twisted drills HSS Ø 4,2 mm 5 pcs. DIN 338
| #1257 |
|
|
Twisted drills HSS 5 pc. Ø 4,2 mm
HSS Quality drill
DIN 338 Type N, cutting angle 118
Drills are made of high-grade tool steel, tempered for maximum hardness and endurance. |
|
|
|
Twisted drills HSS Ø 4,3 mm 5 pcs. DIN 338
| #1258 |
|
|
Twisted drills HSS 5 pc. Ø 4,3 mm
HSS Quality drill
DIN 338 Type N, cutting angle 118
Drills are made of high-grade tool steel, tempered for maximum hardness and endurance. |
|
|
|
Twisted drills HSS Ø 4,4 mm 5 pcs. DIN 338
| #1259 |
|
|
Twisted drills HSS 5 pc. Ø 4,4 mm
HSS Quality drill
DIN 338 Type N, cutting angle 118
Drills are made of high-grade tool steel, tempered for maximum hardness and endurance. |
|
|
|
Twisted drills HSS Ø 4,5 mm 5 pcs. DIN 338
| #1260 |
|
|
Twisted drills HSS 5 pc. Ø 4,5 mm
HSS Quality drill
DIN 338 Type N, cutting angle 118
Drills are made of high-grade tool steel, tempered for maximum hardness and endurance. |
|
|
|
Twisted drills HSS Ø 4,6 mm 5 pcs. DIN 338
| #1261 |
|
|
Twisted drills HSS 5 pc. Ø 4,6 mm
Quality drill
DIN 338 Type N, cutting angle 118
Drills are made of high-grade tool steel, tempered for maximum hardness and endurance. |
|
|
|
Twisted drills HSS Ø 4,7 mm 5 pcs. DIN 338
| #1262 |
|
|
Twisted drills HSS 5 pc. Ø 4,7 mm
Quality drill
DIN 338 Type N, cutting angle 118
Drills are made of high-grade tool steel, tempered for maximum hardness and endurance. |
|
|
|
Twisted drills HSS Ø 4,8 mm 5 pcs. DIN 338
| #1263 |
|
|
Twisted drills HSS 5 pc. Ø 4,8 mm
Quality drill
DIN 338 Type N, cutting angle 118
Drills are made of high-grade tool steel, tempered for maximum hardness and endurance. |
|
|
|
Twisted drills HSS Ø 4,9 mm 5 pcs. DIN 338
| #1264 |
|
|
Twisted drills HSS 5 pc. Ø 4,9 mm
Quality drill
DIN 338 Type N, cutting angle 118
Drills are made of high-grade tool steel, tempered for maximum hardness and endurance. |
|
|
|
Twisted drills HSS Ø 5,0 mm 5 pcs. DIN 338
| #1265 |
|
|
Twisted drills HSS 5 pc. Ø 5,0 mm
Quality drill
DIN 338 Type N, cutting angle 118
Drills are made of high-grade tool steel, tempered for maximum hardness and endurance. |
|
|
|
|
|
Twisted drills set . Ø 1,5 - 6,5mm (t=0,5mm) 14 pcs.
| #1267 |
 |
Twisted drills set 13 pcs. d=1,5 - 6,5mm (t=0,5mm) in plastik box
DIN 338 Ø 1,5 - 2,0 - 2,5 - 3,0 - 3,2 - 3,5 - 4,0 - 4,5 - 4,8 - 5,0 - 5,5 - 6,0 - 6,5mm. |
|
|
|
Twisted drills set 10pc Ø 0,3 - 3 mm
| #1268 |
 |
10 pc. set of twisted drills
DIN 338
Ø 0,3 - 0,5 - 0,8 - 1,0 - 1,2 - 1,5 - 2,0 - 2,5 - 2,8 - 3,0 mm.
For precision drilling of wood, plastic, non-metal, steel and stainless steel. |
|
|
|
Twisted drills set 21pc. Ø 1-2 mm (t=0,1mm) DIN 338 21 pcs.
| #1269 |
 |
Twisted drills set 21pc. d=1-2 mm (t=0,1mm) in useful wooden carrier.
DIN 338
Ø 1,0 - 1,1 - 1,2 - 1,3 - 1,4 - 1,5 - 1,6 - 1,7 - 1,8 - 1,9 - 2,0 mm.
Ø 2,0 - 2,1 - 2,2 - 2,3 - 2,4 - 2,5 - 2,6 - 2,7 - 2,8 - 2,9 - 3,0 mm.
For precision drilling of wood, plastic, non-metal, steel and stainless steel.
|
|
|
|
Twisted drills set 41pc. Ø 1-5 mm (t=0,1mm) DIN 338 41 pcs.
| #1270 |
 |
Twisted drills set 21pc. d=1-2 mm (t=0,1mm) in useful wooden carrier
DIN 338
Ø 1,0 - 1,1 - 1,2 - 1,3 - 1,4 - 1,5 - 1,6 - 1,7 - 1,8 - 1,9 - 2,0 mm.
Ø 2,1 - 2,2 - 2,3 - 2,4 - 2,5 - 2,6 - 2,7 - 2,8 - 2,9 - 3,0 mm.
Ø 3,1 - 3,2 - 3,3 - 3,4 - 3,5 - 3,6 - 3,7 - 3,8 - 3,9 - 4,0 mm.
Ø 4,1 - 4,2 - 4,3 - 4,4 - 4,5 - 4,6 - 4,7 - 4,8 - 4,9 - 5,0 mm.
For precision drilling of wood, plastic, non-metal, steel and stainless steel. More Products: Pin Vice
Hand Drills |
|
|
|
|
|
|
|
|
|
|
|
|
|
Yak F3P 815mm
| #1276 |
 |
Modernes F3P - Flugmodell aus superleichtem Flachschaum der zusätzlich nochmal aufwändig hohlgefräst wurde !!! * Ideal für die Halle (bzw. bei leichtem Wind auch draußen fliegbar)
* Spannweite 815mm
* Länge 786mm
* Fluggewicht ab 130g
* Bausatz mit fertig bedruckten, passgenaue Bauteilen
* komplett mit Anlenkungen, Fahrwerk und Kleinteilen
Empfohlenes Zubehör:
1 x Brushless-Motor
1 x Brushless-Regler
1 x Luftschraube 8*4.3
1 x LiPO Akku 450-7,4V (25C)
3 x Servo 9g
|
|
|
| Books, drawings and DVD's |
Alles über Finsh
| #1277 |
 |
Dieses Buch ist ein Muss für jeden an einer sauberen Oberfläche interessierten Modellbauer. Von der Papierbespannung über Seide und Nylon bis zu GfK, über die Grundierung zur Spritzlackierung, egal ob Tarnlack oder Hochglanzfinish, mit Föhn und Bügeleisen zur folienbespannten Fläche oder mit Grundierung, Schleifpapier und Lappen zum mit Klebefolie überzogenen Holzbauteil. Über den Einsatz aller heute üblichen Bespannmaterialien und deren richtige Verarbeitung gibt dieses Werk Auskunft. In 43 Kapiteln wird alles rund ums Finish abgehandelt.
Medium: Buch, broschiert
Umfang: 136 Seiten
Auflage: 5. , vollständig überarbeitete und erweiterte Auflage
Format: 168 x 239 mm
Erscheinungstermin: 01. 01. 2005
ISBN: 978-3-7883-3625-7
Bestellnummer: 625 |
|
|
| Books, drawings and DVD's |
ARF-Modelle richtig bauen
| #1278 |
 |
Dieses Buch richtet sich an alle, die sich mit dem Bau von Almost-Ready-to-Fly-Modellen beschäftigen. Der Schwerpunkt liegt auf dem Vermitteln handwerklicher Vorgänge. So wird nicht nur gezeigt, wie die einzelnen Bausatzkomponenten richtig zusammengefügt werden, sondern auch, wie Motoren oder Fahrwerke eingebaut, Dekorbögen aufgebracht, Motorhauben angepasst oder auch Kabinenhauben befestigt werden. Dem vorangestellt ist das „kleine ABC der Konstruktion“, in dem Begriffe wie EWD, Sturz, Zug u.v.m. erklärt werden. Ergänzend wird das Erstellen von Flächenschutztaschen, einem Transportgestell, das verbreitern der Flächenauflage, Verstärken von Rohrsteckungen oder auch das Auffüttern untermaßiger Steckungsrohre beschrieben.
Als Anhang findet sich eine Fachwörterliste Englisch – Deutsch.
Artikelinformationen
Medium: Buch, broschiert
Umfang: 136 Seiten
Auflage: 1. Auflage
Format: 168 x 239 mm
Erscheinungstermin: 01. 01. 2007
ISBN: 978-3-7883-1610-5
Bestellnummer: 610 |
|
|
| Books, drawings and DVD's |
Die Geschichte des Modellhubschraubers und andere Erinnerungen
| #1279 |
 |
Referenz book, Die Geschichte des Modellhubschraubers
und andere Erinnerungen
Schlüter, Dieter
Buch, broschiert
216 Seiten
1. Auflage
Format: 168 x 239 mm
Erscheinungstermin: 01. 01. 2007
ISBN: 978-3-7883-0695-3 German language |
|
|
| Books, drawings and DVD's |
Fachbuch Tipps und Kniffe for model maker
| #1280 |
 |
Tipps und Kniffe
for model maker
Sasse, Heinz
book, broschured
96 Pages
7. Auflage
Format: 168 x 239 mm
ISBN: 978-3-7883-1104-9
Pubished: 0.01.2003 German language |
|
|
| Books, drawings and DVD's |
Fredi Flieger Der Modellflieger Cartoon
| #1281 |
 |
Fredi – der ganz normale Modellpilot. Etwas ungeschickt stolpert er von einem Missgeschick ins andere. Trotzdem ist er am Platz immer wieder gern gesehen. Wenn er mit Wupp auftaucht, ist immer was los.
Da platzen Akkus, glühen Regler und Modelle entwickeln einen Charakter, der einem auf fast schon unheimliche Art und Weise vertraut ist.
Medium: Buch, broschiert
Umfang: 56 Seiten
Auflage: 1. Auflage
Format: DIN A4
Erscheinungstermin: 01. 01. 2003
ISBN: 978-3-7883-0679-3
Bestellnummer: 679
|
|
|
| Books, drawings and DVD's |
Großmodelle
| #1282 |
 |
In diesem Werk über Großmodelle geht es um kompetentes Fachwissen. Hier finden stoßgedämpfte Schwinggummis Halt an selbstgefertigten Motor-Befestigungsrückplatten, schnorcheln große Motoren ihre Ansaugluft über selbst gefertigte GfK-Ansaugbögen, werden Steckungsdimensionierungen aufgezeigt und auch fachgerecht eingebaut und die hierzu richtigen Materialien genannt. Mehrfachteilung von Tragflächen ist ebenso kein Tabu-Thema wie der fachgerechte Anlageneinbau.
Medium: Buch, broschiert
Umfang: 160 Seiten
Auflage: 1. Auflage
Format: 168 x 239 mm
Erscheinungstermin: 01. 01. 1997
ISBN: 978-3-7883-1144-5
Bestellnummer: 144
|
|
|
| Books, drawings and DVD's |
Hubschrauber ferngesteuert german language
| #1283 |
 |
Dieter Schlüter, weltweit anerkannt als „Vater des Modellhubschraubers“, hat die schnelle Entwicklung des Modellhubschraubers von Anfang an begleitet und verfügt wie kein anderer über ein profundes Hintergrundwissen zu dieser komplexen Materie. Sein Grundlagenwerk erklärt die Funktionsweise des Hubschraubers, den Umgang damit und vor allem das Fliegen. Der Autor hat die jüngste Auflage erneut durchgearbeitet und auf den aktuellen Stand gebracht. Dieter Schlüter hat dabei bewusst nicht in den alten Text eingegriffen, sondern da, wo es ihm notwendig und sinnvoll erschien, entsprechende Kommentare über Neuentwicklungen, Erfahrungen und Trends eingefügt. Dadurch ist das Buch geblieben, was es immer war und sein soll: ein komplettes Hubschrauber-Grundlagenwerk.
Medium: Buch, broschiert, german language
Umfang: 256 Seiten
Auflage: 14. , überarbeitete Auflage
Format: 168 x 239 mm
Erscheinungstermin: 01. 01. 2007
ISBN: 978-3-7883-4126-8
Bestellnummer: 126
|
|
|
| Books, drawings and DVD's |
Kunstflug mit RC-Modellen
| #1284 |
 |
Vom Erstflug bis hin zur Einstellung und Behebung von Modellproblemen ist alles in diesem Fachbuch zusammengefasst, unter anderem in einer sinnvollen Auflistung, so dass jeder Modellflieger anhand dieser Aufstellung sein Modell optimal einstellen kann. Daneben sind Propellergrößen, Abstimmlängen sowie Drehzahlen von fast allen gängigen Motoren zu finden. Im Anhang befindet sich Interessantes, nicht nur zur geschichtlichen Entwicklung des Modellkunstflugs, sondern auch vom manntragenden Kunstflug bis hin zum Indoor-Fliegen. Eine alphabetische Firmenübersicht nimmt dem Leser lästige Sucherei ab.
Medium: Buch, broschiert
Umfang: 192 Seiten
Auflage: 0. Auflage
Format: 168 x 239 mm
Erscheinungstermin: 01. 01. 2006
ISBN: 978-3-7883-0693-9
Bestellnummer: 693
Nach dem Einstellen der wichtigsten Parameter wie z. B. Ruderausschläge geht es zum Einfliegen. Mit einigen wenigen Schritten bekommt man ein absolut gerade fliegendes Modell, wichtigste Voraussetzung für sauberen Kunstflug. Parameter wie Motorsturz oder Schwerpunkt werden übertrieben verstellt, um die Auswirkungen zu zeigen. Anschließend werden die Basisfiguren vorgestellt. Schauen Sie den Piloten vom ersten Looping bis zur Torquerolle auf den Sender. Natürlich werden auch mögliche Fehler und die notwendige Seitenwindkorrektur angesprochen und gezeigt. Damit Sie noch zu Hause die ersten Figuren üben können, haben wir den Ikarus Easy-Sim-Flugsimulator mit auf die DVD gepackt. |
|
|
| Books, drawings and DVD's |
Modellhubschrauber Technik
| #1285 |
 |
Modellhubschrauber Technik für Fortgeschrittene
Simon, Wolfgang G. Medium: Buch, broschiert
Umfang: 144 Seiten
Auflage: 5. , unveränderte Auflage
Format: 168 x 239 mm
Erscheinungstermin: 01. 01. 2005
ISBN: 978-3-7883-2617-3 German language |
|
|
| Books, drawings and DVD's |
Ratgeber Elektroflug
| #1286 |
 |
Der Autor vermittelt aus langjähriger Erfahrung einen umfassenden Überblick über die verschiedenen Sparten elektrisch angetriebener Modelle. Er demonstriert beispielhaft, wo in der Antriebskette von Akku bis Propeller (oder Impeller) Energieverluste entstehen und wie diese minimiert werden können. Wo ein tieferes Eindringen in die Materie angezeigt ist, geizt der Autor nicht mit erläuternden Grafiken und Bildern. Ein vielseitiger Ratgeber, gleichermaßen interessant für den Neuling wie auch für bereits fortgeschrittene Elektroflugpiloten.
Medium: Buch, broschiert
Umfang: 240 Seiten
Auflage: 6. , vollständig überarbeitete und erweiterte Auflage
Format: 168 x 239 mm
Erscheinungstermin: 01. 01. 2005
ISBN: 978-3-7883-4629-4
Bestellnummer: 629
|
|
|
| Books, drawings and DVD's |
RC-Elektroheli - Der Leitfaden
| #1287 |
 |
RC-Elektroheli - Der Leitfaden
Grüntjens, Norbert Buch
314 Seiten
0. Auflage
Format: 170 x 245mm
Erscheinungstermin: 01. 01. 2006
ISBN: German language |
|
|
| Books, drawings and DVD's |
RC-Helikopter richtig fliegen (mit DVD)
| #1288 |
 |
RC-Helikopter richtig fliegen (mit DVD)
Schritt für Schritt zum Flugerfolg Einen Helikopter zu fliegen, will gelernt sein. Startersets suggerieren zwar, man brauche den Modellhubschrauber nur auszupacken und könne sofort loslegen. Das trifft jedoch nur auf die Piloten zu, die schon Flugerfahrung mit RC-Helikoptern haben. Fluganfänger sind dagegen schnell mit beschädigten Rotorblättern konfrontiert, die sich im Untergrund verfangen haben. Wenn man gleich am ersten Flugtag mehrere Rotorblattsätze „verbraucht“, geht das richtig ins Geld. Auch Tragflächenelemente sowie Höhen- und Seitenflossen an der Gehäuseschale sind nicht nur bei einer Bruchlandung gefährdet. Doch wie muss man vorgehen, damit das Helifliegen problemlos klappt und das Portemonnaie geschont wird? Dieses Buch sagt Ihnen, wie, und greift dabei auf das Wissen von Profis zurück. Der Autor führt Sie Schritt für Schritt zum fachkundigen Helifliegen. Er macht Sie mit den vielen Funktionen der Fernsteuerung vertraut, informiert über den Bau einer Flughilfe für die ersten Flugversuche und erläutert, wie Sie den Flugsimulator optimal nutzen. Sie erfahren, wie Sie den Modellhubschrauber justieren und so die Flugeigenschaften verbessern. Schließlich führen Sie viele aufeinander aufbauende Flugübungen Schritt für Schritt zum sicheren und anspruchsvollen Helifliegen. Servicekapitel über Reparaturen am Fluggerät und die richtige Handhabung der Stromversorgung runden die Informationen ab, damit Ihnen Ihr Heli möglichst lange Freude bereitet. Wer sich als Einsteiger zunächst über Komplettsets, verschiedene Helitypen und Zubehör informieren möchte, findet in diesem Buch ebenfalls wertvolle Tipps.
Aus dem Inhalt:
• Mit der Fernsteuerung auf Du und Du
• Flugsimulator optimal nutzen
• Mit Flugübungen sicher zum Ziel
• Heli justieren – Flugeigenschaften verbessern
• Kleine Mängel selbst beheben
Auf DVD:
• Die Flugschule Schritt für Schritt vom Anfänger zum Piloten
• Kunstflieger Action, Spaß und Spannung! So fliegen die absoluten Helikopter-Profis Artikelinformationen
Medium: Buch, broschiert
Umfang: 128 Seiten
Erscheinungstermin: 10. 06. 2010
|
|
|
| Books, drawings and DVD's |
RC-Trucks aus Bausätzen
| #1289 |
 |
Ferngesteuerte Trucks und Nutzfahrzeuge werden inzwischen immer beliebter, auch bei Modellbauern anderer Sparten. Dies liegt sicherlich mit daran, dass man auch als Einsteiger ohne große Vorkenntnisse schon sehr attraktive Modelle verhältnismäßig schnell und einfach aus gut ausgestatteten Bausätzen montieren kann. In diesem Buch werden primär RC-Truckmodelle im Maßstab 1:16 bzw. 1:14 vorgestellt. Durch die umfangreich bebilderten Baubeschreibungen wird nicht nur der Aufbau der vorgestellten Trucks, sondern auch der von vergleichbaren Modellen erleichtert. Die Erwähnung artverwandter Fahrzeuge (Ketten- und Amphibienfahrzeug) rundet den Inhalt ab.
Medium: Buch, broschiert
Umfang: 120 Seiten
Auflage: 1. Auflage
Format: 168x239 mm
Erscheinungstermin: 09. 07. 2009
ISBN: 978-3-7883-3103-0
Bestellnummer: 103 |
|
|
|
|
| Books, drawings and DVD's |
Reference book, Akkus und Ladegeräte
| #1291 |
 |
Untitled document Referenz book, Akkus und Ladegeräte
Retzbach, Dipl.-Ing. Ludwig
Buch, broschiert
168 Seiten
14. vollständig überarbeitete Auflage
Format: 168 x 239 mm
Erscheinungstermin: 01. 01. 2008
ISBN: 978-3-7883-4142-8 German language |
|
|
|
|
| Books, drawings and DVD's |
Selbstbau von Brushless Außenläufer-Motoren incl. DVD
| #1293 |
 |
German reference book for build brushless outrunners...
Eines Tages begann der Autor, sich mit dem Selbstbau von Brushlessmotoren auseinanderzusetzen, nicht ahnend, dass sich daraus ein eigenständiges Hobby entwickeln würde. Seine im Lauf der Zeit gewonnenen Erfahrungen gibt er nun im vorliegenden Buch weiter. Dabei ist es ihm gelungen, ohne viel theoretischen Ballast eine Einführung in den Selbstbau von BL-Außenläufern zu erstellen. Einmal mit dem BL-Selbstbauvirus infiziert, werden auch Sie kaum mehr davon loskommen! Diesem Buch liegt eine 15-minütige DVD „Vom CD-Laufwerk zum Brushlessmotor“ bei. |
|
|
| Books, drawings and DVD's |
Sonderheft Lithium-Polymer-Akkus LiPo-Technik
| #1294 |
 |
Die neue Sondernummer von Modell beschäftigt sich mit allen relevanten Punkten dieser Akku-Technologie, ebenso wie mit den erforderlichen Gerätschaften und beinhaltet auch einen Vergleich der 5s-LiPo-Klasse und von 10 aktuellen Balancern. Auch das Umrüsten von NiCd/NiMH-Zellen auf LiPo-Zellen nimmt breiten Raum ein. Ganz am Anfang steht aber die Wesenserklärung einer LiPo-Zelle. Auch für Schiffsmodellbauer ist diese Ausgabe empfehlenswert: Auf 24 Seiten ist beispielsweise der Einsatz in SAW-Rennbooten, Segelbooten und Mini-U-Booten nachzulesen. Außerdem wird der Umstieg auf LiPos erklärt. Themenauswahl: - Von den physikalischen Eigenschaften der Zelle bis zur Pflege, Lagerung und Betrieb bei niedrigen Außentemperaturen.
- Praxis: Umrüsten, was ändert sich, was ist zu beachten?
- Leistungssteigerung durch LiPos: Aufwand, Preis, Nutzen;
- LiPos im Langzeittest, Bordstromversorgung mit LiPos, LiPo-Balancer...u.v.m. Mit 24 Seiten zusätzlich wird auch der Einsatz im Schiffsmodell beschrieben: - SAW-Rennboote, Segelboote, Mini-U-Boot, Plastikmodell, LiPo-Masters, Einstieg in den Umstieg...u.v.m  Artikelinformationen
Medium: Zeitschrift
Erscheinungsweise: Sonderheft
Umfang: 128 Seiten
Format: DIN A4
Erscheinungstermin: 28. 10. 2009
ISSN: 0540-5203
|
|
|
| Bücher, Pläne und DVD's |
Alles über Finsh
| #1295 |
|
|
Dieses Buch ist ein Muss für jeden an einer sauberen Oberfläche interessierten Modellbauer. Von der Papierbespannung über Seide und Nylon bis zu GfK, über die Grundierung zur Spritzlackierung, egal ob Tarnlack oder Hochglanzfinish, mit Föhn und Bügeleisen zur folienbespannten Fläche oder mit Grundierung, Schleifpapier und Lappen zum mit Klebefolie überzogenen Holzbauteil. Über den Einsatz aller heute üblichen Bespannmaterialien und deren richtige Verarbeitung gibt dieses Werk Auskunft. In 43 Kapiteln wird alles rund ums Finish abgehandelt.
Medium: Buch, broschiert
Umfang: 136 Seiten
Auflage: 5. , vollständig überarbeitete und erweiterte Auflage
Format: 168 x 239 mm
Erscheinungstermin: 01. 01. 2005
ISBN: 978-3-7883-3625-7
Bestellnummer: 625 |
|
|
| Bücher, Pläne und DVD's |
ARF-Modelle richtig bauen
| #1296 |
|
|
Dieses Buch richtet sich an alle, die sich mit dem Bau von Almost-Ready-to-Fly-Modellen beschäftigen. Der Schwerpunkt liegt auf dem Vermitteln handwerklicher Vorgänge. So wird nicht nur gezeigt, wie die einzelnen Bausatzkomponenten richtig zusammengefügt werden, sondern auch, wie Motoren oder Fahrwerke eingebaut, Dekorbögen aufgebracht, Motorhauben angepasst oder auch Kabinenhauben befestigt werden. Dem vorangestellt ist das „kleine ABC der Konstruktion“, in dem Begriffe wie EWD, Sturz, Zug u.v.m. erklärt werden. Ergänzend wird das Erstellen von Flächenschutztaschen, einem Transportgestell, das verbreitern der Flächenauflage, Verstärken von Rohrsteckungen oder auch das Auffüttern untermaßiger Steckungsrohre beschrieben.
Als Anhang findet sich eine Fachwörterliste Englisch – Deutsch.
Artikelinformationen
Medium: Buch, broschiert
Umfang: 136 Seiten
Auflage: 1. Auflage
Format: 168 x 239 mm
Erscheinungstermin: 01. 01. 2007
ISBN: 978-3-7883-1610-5
Bestellnummer: 610 |
|
|
| Bücher, Pläne und DVD's |
Die Geschichte des Modellhubschraubers und andere Erinnerungen
| #1297 |
|
|
Referenz book, Die Geschichte des Modellhubschraubers
und andere Erinnerungen
Schlüter, Dieter
Buch, broschiert
216 Seiten
1. Auflage
Format: 168 x 239 mm
Erscheinungstermin: 01. 01. 2007
ISBN: 978-3-7883-0695-3 German language |
|
|
| Bücher, Pläne und DVD's |
Fachbuch Tipps und Kniffe for model maker
| #1298 |
|
|
Tipps und Kniffe
for model maker
Sasse, Heinz
book, broschured
96 Pages
7. Auflage
Format: 168 x 239 mm
ISBN: 978-3-7883-1104-9
Pubished: 0.01.2003 German language |
|
|
| Bücher, Pläne und DVD's |
Fredi Flieger Der Modellflieger Cartoon
| #1299 |
|
|
Fredi – der ganz normale Modellpilot. Etwas ungeschickt stolpert er von einem Missgeschick ins andere. Trotzdem ist er am Platz immer wieder gern gesehen. Wenn er mit Wupp auftaucht, ist immer was los.
Da platzen Akkus, glühen Regler und Modelle entwickeln einen Charakter, der einem auf fast schon unheimliche Art und Weise vertraut ist.
Medium: Buch, broschiert
Umfang: 56 Seiten
Auflage: 1. Auflage
Format: DIN A4
Erscheinungstermin: 01. 01. 2003
ISBN: 978-3-7883-0679-3
Bestellnummer: 679
|
|
|
| Bücher, Pläne und DVD's |
Großmodelle
| #1300 |
|
|
In diesem Werk über Großmodelle geht es um kompetentes Fachwissen. Hier finden stoßgedämpfte Schwinggummis Halt an selbstgefertigten Motor-Befestigungsrückplatten, schnorcheln große Motoren ihre Ansaugluft über selbst gefertigte GfK-Ansaugbögen, werden Steckungsdimensionierungen aufgezeigt und auch fachgerecht eingebaut und die hierzu richtigen Materialien genannt. Mehrfachteilung von Tragflächen ist ebenso kein Tabu-Thema wie der fachgerechte Anlageneinbau.
Medium: Buch, broschiert
Umfang: 160 Seiten
Auflage: 1. Auflage
Format: 168 x 239 mm
Erscheinungstermin: 01. 01. 1997
ISBN: 978-3-7883-1144-5
Bestellnummer: 144
|
|
|
| Bücher, Pläne und DVD's |
Hubschrauber ferngesteuert german language
| #1301 |
|
|
Dieter Schlüter, weltweit anerkannt als „Vater des Modellhubschraubers“, hat die schnelle Entwicklung des Modellhubschraubers von Anfang an begleitet und verfügt wie kein anderer über ein profundes Hintergrundwissen zu dieser komplexen Materie. Sein Grundlagenwerk erklärt die Funktionsweise des Hubschraubers, den Umgang damit und vor allem das Fliegen. Der Autor hat die jüngste Auflage erneut durchgearbeitet und auf den aktuellen Stand gebracht. Dieter Schlüter hat dabei bewusst nicht in den alten Text eingegriffen, sondern da, wo es ihm notwendig und sinnvoll erschien, entsprechende Kommentare über Neuentwicklungen, Erfahrungen und Trends eingefügt. Dadurch ist das Buch geblieben, was es immer war und sein soll: ein komplettes Hubschrauber-Grundlagenwerk.
Medium: Buch, broschiert, german language
Umfang: 256 Seiten
Auflage: 14. , überarbeitete Auflage
Format: 168 x 239 mm
Erscheinungstermin: 01. 01. 2007
ISBN: 978-3-7883-4126-8
Bestellnummer: 126
|
|
|
| Bücher, Pläne und DVD's |
Kunstflug mit RC-Modellen
| #1302 |
|
|
Vom Erstflug bis hin zur Einstellung und Behebung von Modellproblemen ist alles in diesem Fachbuch zusammengefasst, unter anderem in einer sinnvollen Auflistung, so dass jeder Modellflieger anhand dieser Aufstellung sein Modell optimal einstellen kann. Daneben sind Propellergrößen, Abstimmlängen sowie Drehzahlen von fast allen gängigen Motoren zu finden. Im Anhang befindet sich Interessantes, nicht nur zur geschichtlichen Entwicklung des Modellkunstflugs, sondern auch vom manntragenden Kunstflug bis hin zum Indoor-Fliegen. Eine alphabetische Firmenübersicht nimmt dem Leser lästige Sucherei ab.
Medium: Buch, broschiert
Umfang: 192 Seiten
Auflage: 0. Auflage
Format: 168 x 239 mm
Erscheinungstermin: 01. 01. 2006
ISBN: 978-3-7883-0693-9
Bestellnummer: 693
Nach dem Einstellen der wichtigsten Parameter wie z. B. Ruderausschläge geht es zum Einfliegen. Mit einigen wenigen Schritten bekommt man ein absolut gerade fliegendes Modell, wichtigste Voraussetzung für sauberen Kunstflug. Parameter wie Motorsturz oder Schwerpunkt werden übertrieben verstellt, um die Auswirkungen zu zeigen. Anschließend werden die Basisfiguren vorgestellt. Schauen Sie den Piloten vom ersten Looping bis zur Torquerolle auf den Sender. Natürlich werden auch mögliche Fehler und die notwendige Seitenwindkorrektur angesprochen und gezeigt. Damit Sie noch zu Hause die ersten Figuren üben können, haben wir den Ikarus Easy-Sim-Flugsimulator mit auf die DVD gepackt. |
|
|
| Bücher, Pläne und DVD's |
Modellhubschrauber Technik
| #1303 |
|
|
Modellhubschrauber Technik für Fortgeschrittene
Simon, Wolfgang G. Medium: Buch, broschiert
Umfang: 144 Seiten
Auflage: 5. , unveränderte Auflage
Format: 168 x 239 mm
Erscheinungstermin: 01. 01. 2005
ISBN: 978-3-7883-2617-3 German language |
|
|
| Bücher, Pläne und DVD's |
Ratgeber Elektroflug
| #1304 |
|
|
Der Autor vermittelt aus langjähriger Erfahrung einen umfassenden Überblick über die verschiedenen Sparten elektrisch angetriebener Modelle. Er demonstriert beispielhaft, wo in der Antriebskette von Akku bis Propeller (oder Impeller) Energieverluste entstehen und wie diese minimiert werden können. Wo ein tieferes Eindringen in die Materie angezeigt ist, geizt der Autor nicht mit erläuternden Grafiken und Bildern. Ein vielseitiger Ratgeber, gleichermaßen interessant für den Neuling wie auch für bereits fortgeschrittene Elektroflugpiloten.
Medium: Buch, broschiert
Umfang: 240 Seiten
Auflage: 6. , vollständig überarbeitete und erweiterte Auflage
Format: 168 x 239 mm
Erscheinungstermin: 01. 01. 2005
ISBN: 978-3-7883-4629-4
Bestellnummer: 629
|
|
|
| Bücher, Pläne und DVD's |
RC-Elektroheli - Der Leitfaden
| #1305 |
|
|
RC-Elektroheli - Der Leitfaden
Grüntjens, Norbert Buch
314 Seiten
0. Auflage
Format: 170 x 245mm
Erscheinungstermin: 01. 01. 2006
ISBN: German language |
|
|
| Bücher, Pläne und DVD's |
RC-Helikopter richtig fliegen (mit DVD)
| #1306 |
|
|
RC-Helikopter richtig fliegen (mit DVD)
Schritt für Schritt zum Flugerfolg Einen Helikopter zu fliegen, will gelernt sein. Startersets suggerieren zwar, man brauche den Modellhubschrauber nur auszupacken und könne sofort loslegen. Das trifft jedoch nur auf die Piloten zu, die schon Flugerfahrung mit RC-Helikoptern haben. Fluganfänger sind dagegen schnell mit beschädigten Rotorblättern konfrontiert, die sich im Untergrund verfangen haben. Wenn man gleich am ersten Flugtag mehrere Rotorblattsätze „verbraucht“, geht das richtig ins Geld. Auch Tragflächenelemente sowie Höhen- und Seitenflossen an der Gehäuseschale sind nicht nur bei einer Bruchlandung gefährdet. Doch wie muss man vorgehen, damit das Helifliegen problemlos klappt und das Portemonnaie geschont wird? Dieses Buch sagt Ihnen, wie, und greift dabei auf das Wissen von Profis zurück. Der Autor führt Sie Schritt für Schritt zum fachkundigen Helifliegen. Er macht Sie mit den vielen Funktionen der Fernsteuerung vertraut, informiert über den Bau einer Flughilfe für die ersten Flugversuche und erläutert, wie Sie den Flugsimulator optimal nutzen. Sie erfahren, wie Sie den Modellhubschrauber justieren und so die Flugeigenschaften verbessern. Schließlich führen Sie viele aufeinander aufbauende Flugübungen Schritt für Schritt zum sicheren und anspruchsvollen Helifliegen. Servicekapitel über Reparaturen am Fluggerät und die richtige Handhabung der Stromversorgung runden die Informationen ab, damit Ihnen Ihr Heli möglichst lange Freude bereitet. Wer sich als Einsteiger zunächst über Komplettsets, verschiedene Helitypen und Zubehör informieren möchte, findet in diesem Buch ebenfalls wertvolle Tipps.
Aus dem Inhalt:
• Mit der Fernsteuerung auf Du und Du
• Flugsimulator optimal nutzen
• Mit Flugübungen sicher zum Ziel
• Heli justieren – Flugeigenschaften verbessern
• Kleine Mängel selbst beheben
Auf DVD:
• Die Flugschule Schritt für Schritt vom Anfänger zum Piloten
• Kunstflieger Action, Spaß und Spannung! So fliegen die absoluten Helikopter-Profis Artikelinformationen
Medium: Buch, broschiert
Umfang: 128 Seiten
Erscheinungstermin: 10. 06. 2010
|
|
|
| Bücher, Pläne und DVD's |
RC-Trucks aus Bausätzen
| #1307 |
|
|
Ferngesteuerte Trucks und Nutzfahrzeuge werden inzwischen immer beliebter, auch bei Modellbauern anderer Sparten. Dies liegt sicherlich mit daran, dass man auch als Einsteiger ohne große Vorkenntnisse schon sehr attraktive Modelle verhältnismäßig schnell und einfach aus gut ausgestatteten Bausätzen montieren kann. In diesem Buch werden primär RC-Truckmodelle im Maßstab 1:16 bzw. 1:14 vorgestellt. Durch die umfangreich bebilderten Baubeschreibungen wird nicht nur der Aufbau der vorgestellten Trucks, sondern auch der von vergleichbaren Modellen erleichtert. Die Erwähnung artverwandter Fahrzeuge (Ketten- und Amphibienfahrzeug) rundet den Inhalt ab.
Medium: Buch, broschiert
Umfang: 120 Seiten
Auflage: 1. Auflage
Format: 168x239 mm
Erscheinungstermin: 09. 07. 2009
ISBN: 978-3-7883-3103-0
Bestellnummer: 103 |
|
|
|
|
| Bücher, Pläne und DVD's |
Reference book, Akkus und Ladegeräte
| #1309 |
|
|
Untitled document Referenz book, Akkus und Ladegeräte
Retzbach, Dipl.-Ing. Ludwig
Buch, broschiert
168 Seiten
14. vollständig überarbeitete Auflage
Format: 168 x 239 mm
Erscheinungstermin: 01. 01. 2008
ISBN: 978-3-7883-4142-8 German language |
|
|
|
|
| Bücher, Pläne und DVD's |
Selbstbau von Brushless Außenläufer-Motoren incl. DVD
| #1311 |
|
|
German reference book for build brushless outrunners...
Eines Tages begann der Autor, sich mit dem Selbstbau von Brushlessmotoren auseinanderzusetzen, nicht ahnend, dass sich daraus ein eigenständiges Hobby entwickeln würde. Seine im Lauf der Zeit gewonnenen Erfahrungen gibt er nun im vorliegenden Buch weiter. Dabei ist es ihm gelungen, ohne viel theoretischen Ballast eine Einführung in den Selbstbau von BL-Außenläufern zu erstellen. Einmal mit dem BL-Selbstbauvirus infiziert, werden auch Sie kaum mehr davon loskommen! Diesem Buch liegt eine 15-minütige DVD „Vom CD-Laufwerk zum Brushlessmotor“ bei. |
|
|
| Bücher, Pläne und DVD's |
Sonderheft Lithium-Polymer-Akkus LiPo-Technik
| #1312 |
|
|
Die neue Sondernummer von Modell beschäftigt sich mit allen relevanten Punkten dieser Akku-Technologie, ebenso wie mit den erforderlichen Gerätschaften und beinhaltet auch einen Vergleich der 5s-LiPo-Klasse und von 10 aktuellen Balancern. Auch das Umrüsten von NiCd/NiMH-Zellen auf LiPo-Zellen nimmt breiten Raum ein. Ganz am Anfang steht aber die Wesenserklärung einer LiPo-Zelle. Auch für Schiffsmodellbauer ist diese Ausgabe empfehlenswert: Auf 24 Seiten ist beispielsweise der Einsatz in SAW-Rennbooten, Segelbooten und Mini-U-Booten nachzulesen. Außerdem wird der Umstieg auf LiPos erklärt. Themenauswahl: - Von den physikalischen Eigenschaften der Zelle bis zur Pflege, Lagerung und Betrieb bei niedrigen Außentemperaturen.
- Praxis: Umrüsten, was ändert sich, was ist zu beachten?
- Leistungssteigerung durch LiPos: Aufwand, Preis, Nutzen;
- LiPos im Langzeittest, Bordstromversorgung mit LiPos, LiPo-Balancer...u.v.m. Mit 24 Seiten zusätzlich wird auch der Einsatz im Schiffsmodell beschrieben: - SAW-Rennboote, Segelboote, Mini-U-Boot, Plastikmodell, LiPo-Masters, Einstieg in den Umstieg...u.v.m Artikelinformationen
Medium: Zeitschrift
Erscheinungsweise: Sonderheft
Umfang: 128 Seiten
Format: DIN A4
Erscheinungstermin: 28. 10. 2009
ISSN: 0540-5203 |
|
|
|
|
Torx15/ Torx20 / Torx25
1,3 - 4,0 / 1,5 - 2,0 / 2,5 - 3,0
5/32" / 25mm / C6,3 / 1/4"
TS 0
IP 6
1,5mm x 86
SW 4mm (M2) l=125mm
hexagon counter sunk DIN 7991: M3 x 12
cylinder head sloted M3 x 10, M3 x 20
T 10 x 73mm
Torx with hole
